From: Nishanth Menon <nm@ti.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.de>, <linux-kernel@vger.kernel.org>,
<lm-sensors@lm-sensors.org>, <linux-omap@vger.kernel.org>
Subject: Re: [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep
Date: Thu, 4 Dec 2014 13:46:15 -0600 [thread overview]
Message-ID: <20141204194615.GA7975@kahuna> (raw)
In-Reply-To: <20141204190528.GA16925@roeck-us.net>
On 11:05-20141204, Guenter Roeck wrote:
> On Thu, Dec 04, 2014 at 10:58:47AM -0600, Nishanth Menon wrote:
> > Certain I2C based GPIO expanders could be used in sleepable context,
> > this results in:
> > [ 115.890569] ------------[ cut here ]------------
> > [ 115.895422] WARNING: CPU: 0 PID: 1115 at drivers/gpio/gpiolib.c:1370 gpiod_set_raw_value+0x40/0x4c()
> > [ 115.905024] Modules linked in:
> > [ 115.908229] CPU: 0 PID: 1115 Comm: sh Tainted: G W 3.18.0-rc7-next-20141203-dirty #1
> > [ 115.917461] Hardware name: Generic DRA74X (Flattened Device Tree)
> > [ 115.923876] [<c0015368>] (unwind_backtrace) from [<c00119f4>] (show_stack+0x10/0x14)
> > [ 115.932013] [<c00119f4>] (show_stack) from [<c05b78e8>] (dump_stack+0x78/0x94)
> > [ 115.939594] [<c05b78e8>] (dump_stack) from [<c003de28>] (warn_slowpath_common+0x7c/0xb4)
> > [ 115.948094] [<c003de28>] (warn_slowpath_common) from [<c003de7c>] (warn_slowpath_null+0x1c/0x24)
> > [ 115.957315] [<c003de7c>] (warn_slowpath_null) from [<c03461e8>] (gpiod_set_raw_value+0x40/0x4c)
> > [ 115.966457] [<c03461e8>] (gpiod_set_raw_value) from [<c04866f4>] (set_fan_speed+0x4c/0x64)
> > [ 115.975145] [<c04866f4>] (set_fan_speed) from [<c04868a8>] (set_rpm+0x98/0xac)
> > [ 115.982742] [<c04868a8>] (set_rpm) from [<c039fb4c>] (dev_attr_store+0x18/0x24)
> > [ 115.990426] [<c039fb4c>] (dev_attr_store) from [<c01b0a28>] (sysfs_kf_write+0x4c/0x50)
> > [ 115.998742] [<c01b0a28>] (sysfs_kf_write) from [<c01afe1c>] (kernfs_fop_write+0xbc/0x19c)
> > [ 116.007333] [<c01afe1c>] (kernfs_fop_write) from [<c0148cc4>] (vfs_write+0xb0/0x1a0)
> > [ 116.015461] [<c0148cc4>] (vfs_write) from [<c0148fbc>] (SyS_write+0x44/0x84)
> > [ 116.022881] [<c0148fbc>] (SyS_write) from [<c000e5c0>] (ret_fast_syscall+0x0/0x48)
> > [ 116.030833] ---[ end trace 3a0b636123acab82 ]---
> >
> > So, switch over to sleepable GPIO operations as there is no mandatory
> > need for non-sleepable gpio operations in the fan driver.
> >
> > This allows the fan driver to be used with i2c based gpio expanders such
> > as palmas_gpio.
> >
> > Signed-off-by: Nishanth Menon <nm@ti.com>
>
> Applied to hwmon-next. Do we need this in older kernels ?
I have'nt had a need for it till recently.. in terms of the sleepable
get/set, it seems to have been introduced with
commit 7560fa60fcdcdb0da662f6a9fad9064b554ef46c
Author: David Brownell <david-b@pacbell.net>
Date: Tue Mar 4 14:28:27 2008 -0800
gpio: <linux/gpio.h> and "no GPIO support here" stubs
Guessing no one needed it so far.. so probably future should be good
enough, I think..
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-12-04 19:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 16:58 [PATCH] hwmon: (gpio-fan) Allow usage of gpio operations that may sleep Nishanth Menon
2014-12-04 19:05 ` Guenter Roeck
2014-12-04 19:46 ` Nishanth Menon [this message]
2014-12-04 20:08 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141204194615.GA7975@kahuna \
--to=nm@ti.com \
--cc=jdelvare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox