From: Peter Chen <peter.chen@freescale.com>
To: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: <stefan@agner.ch>, <gregkh@linuxfoundation.org>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 0/3] usb: chipidea: add one errata for revision 2.40a
Date: Tue, 23 Dec 2014 08:09:44 +0800 [thread overview]
Message-ID: <20141223000940.GA11551@shlinux2> (raw)
In-Reply-To: <54981816.4010708@gmail.com>
On Mon, Dec 22, 2014 at 06:39:42PM +0530, Sanchayan Maity wrote:
> On 12/22/2014 06:48 AM, Peter Chen wrote:
> > On Fri, Dec 19, 2014 at 03:25:26PM +0530, Sanchayan Maity wrote:
> >> The first two patches add identification register API's. These can
> >> be used to get controller's revision.
> >>
> >> The third patch implements an errata for revision 2.40a. Not sure
> >> which other SOCs implement this version of the Chipidea core but
> >> this fixes the usb client issue observed on Vybrids. The patch was
> >> tested on a Toradex Colibri VF61 module with the 3.18 kernel. iperf
> >> tests ran for three hours plus, with these patches applied have found
> >> the USB client connection to be now reliable.
> >
> > Would you help do a overnight test? It is passed, I will queue them,
> > thanks.
>
> Yes definitely I can help with the testing. Are you looking for iperf
> tests only or something else? iperf tests running for 12 or 24 hours
> will do? I will need a bit of time to set things up here, as I am away
> from work, but, ya I will do them.
>
iperf for g_ncm or g_ether and bonnie++ for g_mass_storage if you can
run, thanks.
Peter
> -Regards,
> Sanchayan.
> >
> > Peter
> >>
> >> This patchset is based off on Shawn Guo's for-next branch
> >> https://git.kernel.org/cgit/linux/kernel/git/shawnguo/linux.git/tree/?h=for-next
> >>
> >> The credit for the patches and fix goes to Matthieu Castet and Peter Chen.
> >> First two patches are by Peter Chen and the third patch which fixed the
> >> bug we observed was reported by Matthieu Castet.
> >>
> >> The discussion of the problem and the relevant testing details can be found
> >> at this link: http://www.spinics.net/lists/linux-usb/msg118544.html
> >>
> >> The first version of this patchset originally send by Peter Chen can be
> >> found at this link: http://www.spinics.net/lists/linux-usb/msg118753.html
> >>
> >> Comments for review are welcome :).
> >> Note: I am going on a vacation so will not be able to reply or do any further
> >> tests till Monday. Will attend and take care of any comments/requests for
> >> further changes/testing from Tuesday. Apologize for the delay in advance.
> >>
> >> Sanchayan Maity (3):
> >> usb: chipidea: Add identification registers access APIs
> >> usb: chipidea: Add chipidea revision information
> >> usb: chipidea: Add errata for revision 2.40a
> >>
> >> drivers/usb/chipidea/bits.h | 10 ++++++++
> >> drivers/usb/chipidea/ci.h | 53 +++++++++++++++++++++++++++++++++++++++++++
> >> drivers/usb/chipidea/core.c | 23 +++++++++++++++++--
> >> drivers/usb/chipidea/udc.c | 20 ++++++++++++++++
> >> 4 files changed, 104 insertions(+), 2 deletions(-)
> >>
> >> --
> >> 1.7.9.5
> >>
> >
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2014-12-23 1:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-19 9:55 [PATCH 0/3] usb: chipidea: add one errata for revision 2.40a Sanchayan Maity
2014-12-19 9:55 ` [PATCH 1/3] usb: chipidea: Add identification registers access APIs Sanchayan Maity
2014-12-24 16:00 ` Stefan Agner
2014-12-24 16:15 ` Sanchayan Maity
2014-12-24 16:41 ` Stefan Agner
2014-12-25 2:13 ` Peter Chen
2014-12-25 3:33 ` Sanchayan Maity
2014-12-25 2:03 ` Peter Chen
2014-12-19 9:55 ` [PATCH 2/3] usb: chipidea: Add chipidea revision information Sanchayan Maity
2014-12-24 16:22 ` Stefan Agner
2014-12-25 2:30 ` Peter Chen
2014-12-19 9:55 ` [PATCH 3/3] usb: chipidea: Add errata for revision 2.40a Sanchayan Maity
2014-12-22 1:18 ` [PATCH 0/3] usb: chipidea: add one " Peter Chen
2014-12-22 13:09 ` Sanchayan Maity
2014-12-23 0:09 ` Peter Chen [this message]
2014-12-23 4:11 ` Sanchayan Maity
2014-12-24 7:50 ` Sanchayan Maity
2014-12-24 9:00 ` Peter Chen
2014-12-24 9:20 ` Sanchayan Maity
2014-12-24 15:42 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141223000940.GA11551@shlinux2 \
--to=peter.chen@freescale.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=maitysanchayan@gmail.com \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox