[PATCH 3.18 110/150] mtd: nand: omap: Fix NAND enumeration on 3430 LDP

Greg Kroah-Hartman
2015-01-14T07:29:40Z

From: Roger Quadros <rogerq@ti.com>

commit 775a9134f4398ca98a10af8cc3cf9b664017267f upstream.

3430LDP has NAND flash with 32 bytes OOB size which is sufficient to hold
BCH8 codes but the small page check introduced in
commit b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes")
considers anything below 64 bytes unsuitable for BCH4/8/16. There is another
bug in that code where it doesn't skip the check for OMAP_ECC_HAM1_CODE_SW.

Get rid of that small page check code as it is insufficient and redundant
because we are checking for OOB available bytes vs ecc layout before calling
nand_scan_tail().

Fixes: b491da7233d5 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes")

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mtd/nand/omap2.c | 7 -------
1 file changed, 7 deletions(-)

--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1741,13 +1741,6 @@ static int omap_nand_probe(struct platfo
goto return_error;
}

- /* check for small page devices */
- if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
- dev_err(&info->pdev->dev, "small page devices are not supported\n");
- err = -EINVAL;
- goto return_error;
- }
-
/* re-populate low-level callbacks based on xfer modes */
switch (pdata->xfer_type) {