From: Mark Rutland <mark.rutland@arm.com>
To: Lyra Zhang <zhang.lyra@gmail.com>
Cc: Chunyan Zhang <chunyan.zhang@spreadtrum.com>,
"arnd@arndb.de" <arnd@arndb.de>,
Catalin Marinas <Catalin.Marinas@arm.com>,
Will Deacon <Will.Deacon@arm.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
Pawel Moll <Pawel.Moll@arm.com>,
"ijc+devicetree@hellion.org.uk" <ijc+devicetree@hellion.org.uk>,
"galak@codeaurora.org" <galak@codeaurora.org>,
"Joel.Schopp@amd.com" <Joel.Schopp@amd.com>,
"Thomas.Lendacky@amd.com" <Thomas.Lendacky@amd.com>,
"suravee.suthikulpanit@amd.com" <suravee.suthikulpanit@amd.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"geng.ren@spreadtrum.com" <geng.ren@spreadtrum.com>,
"zhizhou.zhang@spreadtrum.com" <zhizhou.zhang@spreadtrum.com>,
"wei.qiao@spreadtrum.com" <wei.qiao@spreadtrum.com>,
"orsonzhai@gmail.com" <orsonzhai@gmail.com>
Subject: Re: [PATCH v6 1/2] arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
Date: Fri, 23 Jan 2015 11:17:23 +0000 [thread overview]
Message-ID: <20150123111723.GE23493@leverpostej> (raw)
In-Reply-To: <CAAfSe-vQL8gXzNui1wD9_=vp6yGHrEUGQgJOtdNxvt2=AH1Xsg@mail.gmail.com>
On Fri, Jan 23, 2015 at 11:13:29AM +0000, Lyra Zhang wrote:
> On Fri, Jan 23, 2015 at 6:36 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> > On Fri, Jan 23, 2015 at 10:21:30AM +0000, Chunyan Zhang wrote:
> >> From: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
> >>
> >> Adds the device tree support for Spreadtrum SC9836 SoC which is based on
> >> Sharkl64 platform.
> >>
> >> Sharkl64 platform contains the common nodes of Spreadtrum's arm64-based SoCs.
> >>
> >> Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com>
> >> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
> >> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> >> ---
> >> arch/arm64/boot/dts/Makefile | 1 +
> >> arch/arm64/boot/dts/sprd/Makefile | 5 ++
> >> arch/arm64/boot/dts/sprd/sc9836-openphone.dts | 49 ++++++++++++++++
> >> arch/arm64/boot/dts/sprd/sc9836.dtsi | 74 +++++++++++++++++++++++++
> >> arch/arm64/boot/dts/sprd/sharkl64.dtsi | 65 ++++++++++++++++++++++
> >> 5 files changed, 194 insertions(+)
> >> create mode 100644 arch/arm64/boot/dts/sprd/Makefile
> >> create mode 100644 arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> >> create mode 100644 arch/arm64/boot/dts/sprd/sc9836.dtsi
> >> create mode 100644 arch/arm64/boot/dts/sprd/sharkl64.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> >> index 3b8d427..806a717 100644
> >> --- a/arch/arm64/boot/dts/Makefile
> >> +++ b/arch/arm64/boot/dts/Makefile
> >> @@ -2,6 +2,7 @@ dts-dirs += amd
> >> dts-dirs += apm
> >> dts-dirs += arm
> >> dts-dirs += cavium
> >> +dts-dirs += sprd
> >>
> >> always := $(dtb-y)
> >> subdir-y := $(dts-dirs)
> >> diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
> >> new file mode 100644
> >> index 0000000..b658c5e
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/sprd/Makefile
> >> @@ -0,0 +1,5 @@
> >> +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
> >> +
> >> +always := $(dtb-y)
> >> +subdir-y := $(dts-dirs)
> >> +clean-files := *.dtb
> >> diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> >> new file mode 100644
> >> index 0000000..b8a69b2
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
> >> @@ -0,0 +1,49 @@
> >> +/*
> >> + * Spreadtrum SC9836 openphone board DTS file
> >> + *
> >> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> >> + *
> >> + * This file is licensed under a dual GPLv2 or X11 license.
> >> + */
> >> +
> >> +/dts-v1/;
> >> +
> >> +#include "sc9836.dtsi"
> >> +
> >> +/ {
> >> + model = "Spreadtrum SC9836 Openphone Board";
> >> +
> >> + compatible = "sprd,sc9836-openphone", "sprd,sc9836";
> >> +
> >> + aliases {
> >> + serial0 = &uart0;
> >> + serial1 = &uart1;
> >> + serial2 = &uart2;
> >> + serial3 = &uart3;
> >> + };
> >> +
> >> + memory@80000000 {
> >> + device_type = "memory";
> >> + reg = <0 0x80000000 0 0x20000000>;
> >> + };
> >> +
> >> + chosen {
> >> + stdout-path = &uart0;
> >> + };
> >
> > It would be good to use an explicit configuration here. e.g. have:
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> > Where '115200n8' is replaced by whatever the bootloader leaves the UART
> > configured as on this board.
> >
> > That means you won't need a 'console=' to get nice consistent serial
> > output at boot, and won't be relying on implicit defaults all over the
> > place.
> >
>
> ok, I've changed and tested pass.
>
> >> +};
> >> +
> >> +&uart0 {
> >> + status = "okay";
> >> +};
> >> +
> >> +&uart1 {
> >> + status = "okay";
> >> +};
> >> +
> >> +&uart2 {
> >> + status = "okay";
> >> +};
> >> +
> >> +&uart3 {
> >> + status = "okay";
> >> +};
> >> diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> >> new file mode 100644
> >> index 0000000..c646123
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
> >> @@ -0,0 +1,74 @@
> >> +/*
> >> + * Spreadtrum SC9836 SoC DTS file
> >> + *
> >> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> >> + *
> >> + * This file is licensed under a dual GPLv2 or X11 license.
> >> + */
> >> +
> >> +#include "sharkl64.dtsi"
> >> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >> +
> >> +/ {
> >> + compatible = "sprd,sc9836";
> >> +
> >> + cpus {
> >> + #address-cells = <2>;
> >> + #size-cells = <0>;
> >> +
> >> + cpu@0 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a53", "arm,armv8";
> >> + reg = <0x0 0x0>;
> >> + enable-method = "psci";
> >> + };
> >> +
> >> + cpu@1 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a53", "arm,armv8";
> >> + reg = <0x0 0x1>;
> >> + enable-method = "psci";
> >> + };
> >> +
> >> + cpu@2 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a53", "arm,armv8";
> >> + reg = <0x0 0x2>;
> >> + enable-method = "psci";
> >> + };
> >> +
> >> + cpu@3 {
> >> + device_type = "cpu";
> >> + compatible = "arm,cortex-a53", "arm,armv8";
> >> + reg = <0x0 0x3>;
> >> + enable-method = "psci";
> >> + };
> >> + };
> >> +
> >> + gic: interrupt-controller@12001000 {
> >> + compatible = "arm,gic-400";
> >> + reg = <0 0x12001000 0 0x1000>,
> >> + <0 0x12002000 0 0x2000>,
> >> + <0 0x12004000 0 0x2000>,
> >> + <0 0x12006000 0 0x2000>;
> >> + #interrupt-cells = <3>;
> >> + interrupt-controller;
> >> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> >> + };
> >> +
> >> + psci {
> >> + compatible = "arm,psci";
> >> + method = "smc";
> >> + cpu_on = <0xc4000003>;
> >> + cpu_off = <0x84000002>;
> >> + cpu_suspend = <0xc4000001>;
> >> + };
> >
> > Given that there are no suspend states in this dts, the cpu_suspend
> > property here could be omitted for now (though I guess it doesn't matter
> > either way).
> >
> >> +
> >> + timer {
> >> + compatible = "arm,armv8-timer";
> >> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> >> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> >> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> >> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> >> + };
> >> +};
> >> diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
> >> new file mode 100644
> >> index 0000000..6b4bdc5
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
> >> @@ -0,0 +1,65 @@
> >> +/*
> >> + * Spreadtrum Sharkl64 platform DTS file
> >> + *
> >> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> >> + *
> >> + * This file is licensed under a dual GPLv2 or X11 license.
> >> + */
> >> +
> >> +/ {
> >> + interrupt-parent = <&gic>;
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> +
> >> + soc {
> >> + compatible = "simple-bus";
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> + ranges;
> >> +
> >> + ap-apb {
> >> + compatible = "simple-bus";
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> + ranges;
> >> +
> >> + uart0: serial@70000000 {
> >> + compatible = "sprd,sc9836-uart";
> >> + reg = <0 0x70000000 0 0x100>;
> >> + interrupts = <0 2 0xf04>;
> >> + clocks = <&clk26mhz>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart1: serial@70100000 {
> >> + compatible = "sprd,sc9836-uart";
> >> + reg = <0 0x70100000 0 0x100>;
> >> + interrupts = <0 3 0xf04>;
> >> + clocks = <&clk26mhz>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart2: serial@70200000 {
> >> + compatible = "sprd,sc9836-uart";
> >> + reg = <0 0x70200000 0 0x100>;
> >> + interrupts = <0 2 0xf04>;
> >> + clocks = <&clk26mhz>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + uart3: serial@70300000 {
> >> + compatible = "sprd,sc9836-uart";
> >> + reg = <0 0x70300000 0 0x100>;
> >> + interrupts = <0 3 0xf04>;
> >> + clocks = <&clk26mhz>;
> >> + status = "disabled";
> >> + };
> >> + };
> >> + };
> >> +
> >> + clk26mhz: clk26mhz {
> >> + compatible = "fixed-clock";
> >> + #clock-cells = <0>;
> >> + clock-frequency = <26000000>;
> >> + };
> >> +};
> >
> > Other than my comments above, this looks fine to me. I assume the UART
> > binding and driver are already queued somewhere else?
> >
>
> Since the last version patch series must be split for applying.
> I'll send the UART bindings with UART driver soon.
>
> For this case, can I still add your Acked-by and send these two patch
> to Greg right now?
If the UART patches aren't queued yet then I'd like to take a look at
their next posting first.
Surely these 2 patches (with parts under arch/arm64) should go via
arm-soc?
Thanks,
Mark.
next prev parent reply other threads:[~2015-01-23 11:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <sprd-dt-v6>
2015-01-23 10:21 ` [PATCH v6 0/2] Add Spreadtrum Sharkl64 Platform support Chunyan Zhang
2015-01-23 10:21 ` [PATCH v6 1/2] arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile Chunyan Zhang
2015-01-23 10:36 ` Mark Rutland
2015-01-23 11:13 ` Lyra Zhang
2015-01-23 11:17 ` Mark Rutland [this message]
2015-01-23 11:22 ` Lyra Zhang
2015-01-23 10:21 ` [PATCH v6 2/2] arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig Chunyan Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150123111723.GE23493@leverpostej \
--to=mark.rutland@arm.com \
--cc=Catalin.Marinas@arm.com \
--cc=Joel.Schopp@amd.com \
--cc=Pawel.Moll@arm.com \
--cc=Thomas.Lendacky@amd.com \
--cc=Will.Deacon@arm.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=chunyan.zhang@spreadtrum.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=geng.ren@spreadtrum.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=orsonzhai@gmail.com \
--cc=robh+dt@kernel.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=wei.qiao@spreadtrum.com \
--cc=zhang.lyra@gmail.com \
--cc=zhizhou.zhang@spreadtrum.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox