[PATCH 3.19.0-rc5 02/02] STAGING: Fix pcl818.c coding style issue: line over 80 characters

Simon Guo
2015-01-27T15:05:31Z

Correct one coding style problem(detected by checkpatch.pl) in pcl818.c.
- line over 80 characters

Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
---
drivers/staging/comedi/drivers/pcl818.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 5d9050c..2b8a05e 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -297,9 +297,11 @@ static const struct pcl818_board boardtypes[] = {

struct pcl818_private {
struct comedi_isadma *dma;
- unsigned int ns_min; /* manimal allowed delay between samples (in us) for actual card */
+ /* manimal allowed delay between samples (in us) for actual card */
+ unsigned int ns_min;
int i8253_osc_base; /* 1/frequency of on board oscilator in ns */
- unsigned int act_chanlist[16]; /* MUX setting for actual AI operations */
+ /* MUX setting for actual AI operations */
+ unsigned int act_chanlist[16];
unsigned int act_chanlist_len; /* how long is actual MUX list */
unsigned int act_chanlist_pos; /* actual position in MUX list */
unsigned int divisor1;
@@ -641,7 +643,8 @@ static int check_channel_list(struct comedi_device *dev,
break;
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
- if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continuous :-( */
+ if (nowmustbechan != CR_CHAN(chanlist[i])) {
+ /* channel list isn't continuous :-( */
dev_dbg(dev->class_dev,
"channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
i, CR_CHAN(chanlist[i]), nowmustbechan,
@@ -1147,8 +1150,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
devpriv->ns_min = board->ns_min;

if (!board->is_818) {
- if ((it->options[6] == 1) || (it->options[6] == 100))
- devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */
+ if ((it->options[6] == 1) || (it->options[6] == 100)) {
+ /* extended PCL718 to 100kHz DAC */
+ devpriv->ns_min = 10000;
+ }
}

pcl818_reset(dev);
--
1.8.1.2