[PATCH] mfd: Add support for COMe-cBL6 to Kontron PLD driver

[Michael Brunner <mibru@gmx.de>]

This patch adds the DMI system ID of the Kontron COMe-cBL6 board to
the Kontron PLD driver. The list of supported products in the module
description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
---
 drivers/mfd/Kconfig       |  1 +
 drivers/mfd/kempld-core.c | 11 +++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b731..0c066b9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -352,6 +352,7 @@ config MFD_KEMPLD
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cBL6
 		* COMe-cBT6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index f38ec42..61a1f9b 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -508,8 +508,15 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		},
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
-	},
-	{
+	}, {
+		.ident = "CBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- 
1.8.5.1