Re: [PATCH v3 0/5] Add support for Fujitsu USB host controller

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1788 bytes --]

Hi,

On Thu, Jan 29, 2015 at 10:23:12AM -0600, Felipe Balbi wrote:
> On Tue, Jan 27, 2015 at 09:22:50AM -0600, Felipe Balbi wrote:
> > Hi,
> > 
> > On Sun, Jan 25, 2015 at 04:13:23PM +0800, Sneeker Yeh wrote:
> > > These patches add support for XHCI compliant Host controller found
> > > on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
> > > The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
> > > and last four patch is about quirk implementation of errata in Synopsis
> > > DesignWare USB3 IP.
> > > 
> > > Patch 1 introduces a quirk with device disconnection management necessary
> > > Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
> > > DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
> > > quirk, that host controller will die after a usb device is disconnected from
> > > port of root hub.
> > > 
> > > Patch 2 is to set Synopsis quirk in xhci platform driver based on xhci platform
> > > data.
> > > 
> > > Patch 3 is to add a revison number 2.90a and 3.00a of Synopsis DesignWare USB3
> > > IP core driver.
> > > 
> > > Patch 4 introduces using a quirk based on a errata of Synopsis
> > > DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
> > > DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
> > > result this quirk has to be enabled via platform data or device tree.
> > > 
> > > Patch 5 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
> > > driver. 
> > > 
> > 
> > Mathias, let me know how you want to handle this. Either I take them
> > all, or you take them all. What do you prefer ?
> 
> Mathias ?

Mathias, a reminder on this series.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]