Re: [PATCH 3.18 00/39] 3.18.7-stable review

Shuah Khan
2015-02-09T23:19:47Z

[-- Attachment #1: Type: text/plain, Size: 2511 bytes --]

On 02/09/2015 03:24 PM, Winkler, Tomas wrote:
>
>
>>
>> On Tue, Feb 10, 2015 at 05:37:36AM +0800, Greg Kroah-Hartman wrote:
>>> On Mon, Feb 09, 2015 at 11:27:10AM -0700, Shuah Khan wrote:
>>>> On 02/09/2015 01:33 AM, Greg Kroah-Hartman wrote:
>>>>> This is the start of the stable review cycle for the 3.18.7 release.
>>>>> There are 39 patches in this series, all will be posted as a response
>>>>> to this one. If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Wed Feb 11 08:33:11 UTC 2015.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>> kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.7-rc1.gz
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>>
>>>>
>>>> Compiled and booted on my test system.
>>>>
>>>> I am seeing the following mei_me messages:
>>>>
>>>> mei_me 0000:00:16.0: version message write failed: ret = -5
>>>> mei_me 0000:00:16.0: hbm_start failed ret = -5
>>>> mei_me 0000:00:16.0: version message write failed: ret = -5
>>>> mei_me 0000:00:16.0: hbm_start failed ret = -5
>>>>
>>>> Not concerned - maybe Alexander Usyskin and Tomas Winkler
>>>> can take a look and see if this looks ok.
>>>>
>>>> Could this be related to:
>>>>
>>>> mei: clean reset bit before reset
>>>>
>>>> commit b13a65ef190e488e2761d65bdd2e1fe8a3a125f5 upstream.
>>>
>>> Odd, I wouldn't think that this commit would cause those errors to show
>>> up, if so, that's not good.
>>>
>>> Alexander, any thoughts?
>>>
>> mei_hbm_reset() is called just before the above message. Maybe the reset is not
>> complete ? The comment associated with the commit suggests that this can
>> happen.
>> If so, there should also be warning "H_RST is set = 0x%08X" in the log.
>
> Can you please provide details of your system + lspci -vn output
> The complete log would helpful and if you can enable dynamic debug on mei and mei_me modules it would be the best.
>
> Thanks
> Tomas
>

Hi Tomas,

Please see attached dmidecode output, the original dmesg from when
I saw the problem, and dmesg after enabling dynamic debug on mei.
I can't reproduce the problem with dynamic debug enabled, tried a
couple of reboots.

Please let me know you need more information.

thanks,
-- Shuah

--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

[-- Attachment #2: 3.18.7-rc1+.dmesg --]
[-- Type: text/plain, Size: 52337 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.7-rc1+ (shuah@mazurka) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #7 SMP Mon Feb 9 08:57:51 MST 2015
Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-rc1+ root=UUID=9f7f1c57-70a6-480b-a021-67d4eee99e78 ro earlyprintk=vga intel_iommu=on trace_event=io_page_fault,unmap,map,detach_device_from_domain,attach_device_to_domain,remove_device_from_group,add_device_to_group
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c3e33fff] usable
BIOS-e820: [mem 0x00000000c3e34000-0x00000000c3e3afff] ACPI NVS
BIOS-e820: [mem 0x00000000c3e3b000-0x00000000c4285fff] usable
BIOS-e820: [mem 0x00000000c4286000-0x00000000c4698fff] reserved
BIOS-e820: [mem 0x00000000c4699000-0x00000000d8701fff] usable
BIOS-e820: [mem 0x00000000d8702000-0x00000000d8909fff] reserved
BIOS-e820: [mem 0x00000000d890a000-0x00000000d891ffff] ACPI data
BIOS-e820: [mem 0x00000000d8920000-0x00000000d8e60fff] ACPI NVS
BIOS-e820: [mem 0x00000000d8e61000-0x00000000d9ffefff] reserved
BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System76, Inc. Wild Dog Performance/H87-PLUS, BIOS 0705 12/05/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DC000000 mask 7FFC000000 uncachable
4 base 00DB000000 mask 7FFF000000 uncachable
5 base 041FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3504MB, range: 16MB, type UC
reg 5, base: 16894MB, range: 2MB, type UC
total RAM covered: 16302M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3504MB, range: 16MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 8GB, type WB
reg 7, base: 16GB, range: 512MB, type WB
reg 8, base: 16894MB, range: 2MB, type UC
e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
BRK [0x01feb000, 0x01febfff] PGTABLE
init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[mem 0x41fc00000-0x41fdfffff] page 2M
BRK [0x01fec000, 0x01fecfff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
[mem 0x41c000000-0x41fbfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc3e33fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xc3dfffff] page 2M
[mem 0xc3e00000-0xc3e33fff] page 4k
init_memory_mapping: [mem 0xc3e3b000-0xc4285fff]
[mem 0xc3e3b000-0xc3ffffff] page 4k
[mem 0xc4000000-0xc41fffff] page 2M
[mem 0xc4200000-0xc4285fff] page 4k
BRK [0x01fed000, 0x01fedfff] PGTABLE
init_memory_mapping: [mem 0xc4699000-0xd8701fff]
[mem 0xc4699000-0xc47fffff] page 4k
[mem 0xc4800000-0xd85fffff] page 2M
[mem 0xd8600000-0xd8701fff] page 4k
BRK [0x01fee000, 0x01feefff] PGTABLE
init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[mem 0xd9fff000-0xd9ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x253b6000-0x2e9d2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D890E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D891AE98 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D890E198 00CCFD (v02 ALASKA A M I 00000024 INTL 20091112)
ACPI: FACS 0x00000000D8E5F080 000040
ACPI: APIC 0x00000000D891AFA8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D891B040 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D891B088 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D891B5C8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: MCFG 0x00000000D891C0A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D891C0E0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D891C118 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D891C488 003482 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 0x00000000D891F9A0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: BGRT 0x00000000D891F968 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
NODE_DATA(0) allocated [mem 0x41fdf8000-0x41fdfbfff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xc3e33fff]
node 0: [mem 0xc3e3b000-0xc4285fff]
node 0: [mem 0xc4699000-0xd8701fff]
node 0: [mem 0xd9fff000-0xd9ffffff]
node 0: [mem 0x100000000-0x41fdfffff]
Initmem setup node 0 [mem 0x00001000-0x41fdfffff]
On node 0 totalpages: 4161669
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13772 pages used for memmap
DMA32 zone: 881385 pages, LIFO batch:31
Normal zone: 51192 pages used for memmap
Normal zone: 3276288 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc3e34000-0xc3e3afff]
PM: Registered nosave memory: [mem 0xc4286000-0xc4698fff]
PM: Registered nosave memory: [mem 0xd8702000-0xd8909fff]
PM: Registered nosave memory: [mem 0xd890a000-0xd891ffff]
PM: Registered nosave memory: [mem 0xd8920000-0xd8e60fff]
PM: Registered nosave memory: [mem 0xd8e61000-0xd9ffefff]
PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88041fa00000 s83776 r8192 d30912 u262144
pcpu-alloc: s83776 r8192 d30912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4096620
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-rc1+ root=UUID=9f7f1c57-70a6-480b-a021-67d4eee99e78 ro earlyprintk=vga intel_iommu=on trace_event=io_page_fault,unmap,map,detach_device_from_domain,attach_device_to_domain,remove_device_from_group,add_device_to_group
Intel-IOMMU: enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16147116K/16646676K available (7769K kernel code, 1256K rwdata, 3676K rodata, 1380K init, 1320K bss, 499560K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.235 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.47 BogoMIPS (lpj=13568940)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e95000 - ffffffff81e9d000)
ftrace: allocating 29196 entries in 115 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000d8891000 end: 0x000000d889dfff
dmar: RMRR base: 0x000000db000000 end: 0x000000df1fffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54275.76 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.capability
PM: Registering ACPI NVS region [mem 0xc3e34000-0xc3e3afff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xd8920000-0xd8e60fff] (5509120 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:04:50, date: 02/09/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804080AC400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804080A2000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804080C2C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: Enabling MPC IRBNCE
pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc3e34000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc4286000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xd8702000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 153716K (ffff8800253b6000 - ffff88002e9d3000)
DMAR: No ATSR found
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU 1 0xfed91000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0xdb000000 - 0xdf1fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0xd8891000 - 0xd889dfff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xd8891000 - 0xd889dfff]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xd8891000 - 0xd889dfff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1423505090.892:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 31966
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 27 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.7-rc1+ xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.7-rc1+ xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e1c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.7-rc1+ ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.7-rc1+ ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 3c6de3054b28707a3597898adbe0505a68d023a6'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
evm: HMAC attrs: 0x1
Magic number: 3:74:89
rtc_cmos 00:02: setting system clock to 2015-02-09 18:04:51 UTC (1423505091)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1380K (ffffffff81d3c000 - ffffffff81e95000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 412K (ffff880001799000 - ffff880001800000)
Freeing unused kernel memory: 420K (ffff880001b97000 - ffff880001c00000)
systemd-udevd[143]: starting version 208
random: systemd-udevd urandom read with 5 bits of entropy available
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
r8169 0000:03:00.0: irq 29 for MSI/MSI-X
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018c0000, e0:3f:49:44:d4:33, XID 0c000800 IRQ 29
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-4: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-4: New USB device found, idVendor=0424, idProduct=2412
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=8008
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=8000
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-5: new full-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=8087, idProduct=07dc
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
raid6: sse2x1 12166 MB/s
usb 1-4.1: new low-speed USB device number 4 using xhci_hcd
raid6: sse2x2 15389 MB/s
raid6: sse2x4 18023 MB/s
usb 1-4.1: New USB device found, idVendor=0461, idProduct=4e04
usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.1: Product: USB NETVISTA FULL WIDTH KEYBOARD
usb 1-4.1: Manufacturer: NOVATEK
usb 1-4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0461:4E04.0001/input/input5
hid-generic 0003:0461:4E04.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:14.0-4.1/input0
input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0461:4E04.0002/input/input6
hid-generic 0003:0461:4E04.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:14.0-4.1/input1
raid6: avx2x1 23418 MB/s
usb 1-4.2: new low-speed USB device number 5 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3392.146 MHz
raid6: avx2x2 27392 MB/s
usb 1-4.2: New USB device found, idVendor=04b3, idProduct=310c
usb 1-4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-4.2: Product: USB Optical Mouse
usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:04B3:310C.0003/input/input7
hid-generic 0003:04B3:310C.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4.2/input0
raid6: avx2x4 31806 MB/s
raid6: using algorithm avx2x4 (31806 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 36494.000 MB/sec
Btrfs loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (279) terminated with status 5
Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
systemd-udevd[522]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
init: avahi-cups-reload main process (605) terminated with status 1
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: dig-out=0x11/0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Front Mic=0x19
sound hdaudioC1D0: Rear Mic=0x18
sound hdaudioC1D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
audit: type=1400 audit(1423505093.268:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=599 comm="apparmor_parser"
audit: type=1400 audit(1423505093.268:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=599 comm="apparmor_parser"
audit: type=1400 audit(1423505093.268:4): apparmor="STATUS" operation="profile_load" name="third_party" pid=599 comm="apparmor_parser"
[drm] Memory usable by graphics device = 2048M
[drm] VT-d active for gfx access
[drm] Replacing VGA console driver
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMAR active, disabling use of stolen memory
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d2e
Bluetooth: hci0: Intel device is already patched. patch num: 2e
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:62: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:03.0: irq 32 for MSI/MSI-X
mei_me 0000:00:16.0: irq 33 for MSI/MSI-X
mei_me 0000:00:16.0: version message write failed: ret = -5
mei_me 0000:00:16.0: hbm_start failed ret = -5
mei_me 0000:00:16.0: version message write failed: ret = -5
mei_me 0000:00:16.0: hbm_start failed ret = -5
Switched to clocksource tsc
fbcon: inteldrmfb (fb0) is primary device
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
device-mapper: multipath: version 1.7.0 loaded
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
Console: switching to colour frame buffer device 240x67
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
cfg80211: Calling CRDA to update world regulatory domain
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
asus_wmi: Disabling ACPI video driver
random: nonblocking pool is initialized
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
audit: type=1400 audit(1423505093.544:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
audit: type=1400 audit(1423505093.544:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
audit: type=1400 audit(1423505093.544:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:02:00.0: irq 34 for MSI/MSI-X
audit: type=1400 audit(1423505093.588:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
audit: type=1400 audit(1423505093.588:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
audit: type=1400 audit(1423505093.588:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7260-10.ucode failed with error -2
iwlwifi 0000:02:00.0: loaded firmware version 25.222.9.0 op_mode iwlmvm
init: failsafe main process (854) killed by TERM signal
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
systemd-logind[990]: New seat seat0.
systemd-logind[990]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[990]: Watching system buttons on /dev/input/event0 (Power Button)
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 54 callbacks suppressed
audit: type=1400 audit(1423505096.848:29): apparmor="STATUS" operation="profile_load" name="/usr/lib/firefox/firefox{,*[^s][^h]}" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505096.848:30): apparmor="STATUS" operation="profile_load" name="browser_java" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505096.848:31): apparmor="STATUS" operation="profile_load" name="browser_openjdk" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505096.848:32): apparmor="STATUS" operation="profile_load" name="lsb_release" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505096.848:33): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505097.220:34): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505097.220:35): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505097.220:36): apparmor="STATUS" operation="profile_load" name="pxgsettings" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505097.220:37): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=983 comm="apparmor_parser"
audit: type=1400 audit(1423505097.220:38): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-ofono" pid=983 comm="apparmor_parser"
init: gdm main process (1623) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
init: lightdm main process (1301) terminated with status 1
init: lightdm main process ended, respawning
systemd-logind[990]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[990]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[990]: New session 1 of user shuah.
systemd-logind[990]: Failed to start unit user@111.service: Unknown unit: user@111.service
systemd-logind[990]: Failed to start user service: Unknown unit: user@111.service
systemd-logind[990]: New session c1 of user lightdm.
systemd-logind[990]: Linked /tmp/.X11-unix/X0 to /run/user/111/X11-display.

[-- Attachment #3: dmesg_mei --]
[-- Type: text/plain, Size: 78699 bytes --]

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.7-rc1+ (shuah@mazurka) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #7 SMP Mon Feb 9 08:57:51 MST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-rc1+ root=UUID=9f7f1c57-70a6-480b-a021-67d4eee99e78 ro earlyprintk=vga intel_iommu=on trace_event=io_page_fault,unmap,map,detach_device_from_domain,attach_device_to_domain,remove_device_from_group,add_device_to_group
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c3e33fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c3e34000-0x00000000c3e3afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c3e3b000-0x00000000c4285fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c4286000-0x00000000c4698fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c4699000-0x00000000d8701fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8702000-0x00000000d8909fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d890a000-0x00000000d891ffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8920000-0x00000000d8e60fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d8e61000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System76, Inc. Wild Dog Performance/H87-PLUS, BIOS 0705 12/05/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 4, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16302M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 3504MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 3520MB, range: 64MB, type UC
[ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 6, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 7, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 8, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd840-0x000fd84f] mapped at [ffff8800000fd840]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[ 0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[ 0.000000] [mem 0x41fc00000-0x41fdfffff] page 2M
[ 0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
[ 0.000000] [mem 0x41c000000-0x41fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc3e33fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc3dfffff] page 2M
[ 0.000000] [mem 0xc3e00000-0xc3e33fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc3e3b000-0xc4285fff]
[ 0.000000] [mem 0xc3e3b000-0xc3ffffff] page 4k
[ 0.000000] [mem 0xc4000000-0xc41fffff] page 2M
[ 0.000000] [mem 0xc4200000-0xc4285fff] page 4k
[ 0.000000] BRK [0x01fed000, 0x01fedfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc4699000-0xd8701fff]
[ 0.000000] [mem 0xc4699000-0xc47fffff] page 4k
[ 0.000000] [mem 0xc4800000-0xd85fffff] page 2M
[ 0.000000] [mem 0xd8600000-0xd8701fff] page 4k
[ 0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] [mem 0xd9fff000-0xd9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x253b6000-0x2e9d2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D890E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D891AE98 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D890E198 00CCFD (v02 ALASKA A M I 00000024 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D8E5F080 000040
[ 0.000000] ACPI: APIC 0x00000000D891AFA8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D891B040 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D891B088 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D891B5C8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000D891C0A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D891C0E0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D891C118 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D891C488 003482 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000D891F9A0 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000D891F968 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf8000-0x41fdfbfff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc3e33fff]
[ 0.000000] node 0: [mem 0xc3e3b000-0xc4285fff]
[ 0.000000] node 0: [mem 0xc4699000-0xd8701fff]
[ 0.000000] node 0: [mem 0xd9fff000-0xd9ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x41fdfffff]
[ 0.000000] On node 0 totalpages: 4161669
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13772 pages used for memmap
[ 0.000000] DMA32 zone: 881385 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc3e34000-0xc3e3afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4286000-0xc4698fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8702000-0xd8909fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd890a000-0xd891ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8920000-0xd8e60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8e61000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88041fa00000 s83776 r8192 d30912 u262144
[ 0.000000] pcpu-alloc: s83776 r8192 d30912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4096620
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.7-rc1+ root=UUID=9f7f1c57-70a6-480b-a021-67d4eee99e78 ro earlyprintk=vga intel_iommu=on trace_event=io_page_fault,unmap,map,detach_device_from_domain,attach_device_to_domain,remove_device_from_group,add_device_to_group
[ 0.000000] Intel-IOMMU: enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16147116K/16646676K available (7769K kernel code, 1256K rwdata, 3676K rodata, 1380K init, 1320K bss, 499560K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3391.962 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.92 BogoMIPS (lpj=13567848)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20140926
[ 0.007055] ACPI: All ACPI Tables successfully acquired
[ 0.019526] Security Framework initialized
[ 0.019536] AppArmor: AppArmor initialized
[ 0.019537] Yama: becoming mindful.
[ 0.020199] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.022265] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023168] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.023180] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.023348] Initializing cgroup subsys memory
[ 0.023352] Initializing cgroup subsys devices
[ 0.023354] Initializing cgroup subsys freezer
[ 0.023356] Initializing cgroup subsys net_cls
[ 0.023358] Initializing cgroup subsys blkio
[ 0.023360] Initializing cgroup subsys perf_event
[ 0.023362] Initializing cgroup subsys hugetlb
[ 0.023377] CPU: Physical Processor ID: 0
[ 0.023379] CPU: Processor Core ID: 0
[ 0.023382] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024120] mce: CPU supports 9 MCE banks
[ 0.024130] CPU0: Thermal monitoring enabled (TM1)
[ 0.024140] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.024217] Freeing SMP alternatives memory: 32K (ffffffff81e95000 - ffffffff81e9d000)
[ 0.024936] ftrace: allocating 29196 entries in 115 pages
[ 0.033438] dmar: Host address width 39
[ 0.033441] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033447] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.033448] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.033451] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.033453] dmar: RMRR base: 0x000000d8891000 end: 0x000000d889dfff
[ 0.033454] dmar: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.033519] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.033520] HPET id 0 under DRHD base 0xfed91000
[ 0.033521] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.033629] Enabled IRQ remapping in x2apic mode
[ 0.033630] Enabling x2apic
[ 0.033632] Enabled x2apic
[ 0.033635] Switched APIC routing to cluster x2apic.
[ 0.034033] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073731] smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.073736] TSC deadline timer enabled
[ 0.073754] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.073768] ... version: 3
[ 0.073769] ... bit width: 48
[ 0.073770] ... generic registers: 4
[ 0.073771] ... value mask: 0000ffffffffffff
[ 0.073772] ... max period: 0000ffffffffffff
[ 0.073773] ... fixed-purpose events: 3
[ 0.073774] ... event mask: 000000070000000f
[ 0.074868] x86: Booting SMP configuration:
[ 0.074870] .... node #0, CPUs: #1
[ 0.088651] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088767] #2 #3 #4 #5 #6 #7
[ 0.171985] x86: Booted up 1 node, 8 CPUs
[ 0.171989] smpboot: Total of 8 processors activated (54271.39 BogoMIPS)
[ 0.178898] devtmpfs: initialized
[ 0.180875] evm: security.selinux
[ 0.180877] evm: security.SMACK64
[ 0.180878] evm: security.capability
[ 0.180911] PM: Registering ACPI NVS region [mem 0xc3e34000-0xc3e3afff] (28672 bytes)
[ 0.180913] PM: Registering ACPI NVS region [mem 0xd8920000-0xd8e60fff] (5509120 bytes)
[ 0.181654] pinctrl core: initialized pinctrl subsystem
[ 0.181700] regulator-dummy: no parameters
[ 0.181727] RTC time: 23:07:40, date: 02/09/15
[ 0.181802] NET: Registered protocol family 16
[ 0.182777] cpuidle: using governor ladder
[ 0.186782] cpuidle: using governor menu
[ 0.186811] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.186813] ACPI: bus type PCI registered
[ 0.186815] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.186864] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.186867] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.186919] PCI: Using configuration type 1 for base access
[ 0.191062] ACPI: Added _OSI(Module Device)
[ 0.191064] ACPI: Added _OSI(Processor Device)
[ 0.191066] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.191067] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.193550] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.195087] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.198864] ACPI: Dynamic OEM Table Load:
[ 0.198869] ACPI: SSDT 0xFFFF8804080AC400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.202942] ACPI: Dynamic OEM Table Load:
[ 0.202947] ACPI: SSDT 0xFFFF8804080A2000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.206859] ACPI: Dynamic OEM Table Load:
[ 0.206863] ACPI: SSDT 0xFFFF8804080C2C00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.211565] ACPI: Interpreter enabled
[ 0.211571] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.211576] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.211589] ACPI: (supports S0 S3 S4 S5)
[ 0.211590] ACPI: Using IOAPIC for interrupt routing
[ 0.211606] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.216471] ACPI: Power Resource [FN00] (off)
[ 0.216517] ACPI: Power Resource [FN01] (off)
[ 0.216560] ACPI: Power Resource [FN02] (off)
[ 0.216604] ACPI: Power Resource [FN03] (off)
[ 0.216648] ACPI: Power Resource [FN04] (off)
[ 0.217157] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.217162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.217298] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.217372] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.217697] PCI host bridge to bus 0000:00
[ 0.217699] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.217701] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.217702] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.217704] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.217705] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.217707] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.217708] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.217709] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.217711] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.217712] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.217714] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 0.217719] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.217775] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.217801] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.217834] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.217861] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.217868] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.217873] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.217876] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.217927] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.217933] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[ 0.218007] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.218022] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.218073] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.218097] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.218123] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.218138] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[ 0.218193] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.218248] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.218265] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[ 0.218342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.218375] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.218403] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.218416] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.218475] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218501] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.218524] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.218582] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218598] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.218600] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.218619] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.218642] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.218700] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.218714] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.218716] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.218735] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.218758] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.218816] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.218847] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.218877] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.218894] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[ 0.218971] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.219006] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.219032] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
[ 0.219165] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.219177] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.219182] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.219188] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.219193] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.219199] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.219205] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[ 0.219236] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.219278] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.219290] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[ 0.219306] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.219381] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.219457] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.219493] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[ 0.219675] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.219718] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.226840] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.226845] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.226911] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.226929] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.226954] pci 0000:03:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.226970] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.227059] pci 0000:03:00.0: supports D1 D2
[ 0.227060] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.227093] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.234840] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.234843] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.234846] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.234849] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.234903] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.234999] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.235018] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.235025] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.235027] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.235028] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.235028] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.235029] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.235030] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.235031] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.235032] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.235033] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.235034] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[ 0.235126] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.235144] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.235144] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.235145] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.235146] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.235147] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.235148] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.235149] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.235150] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.235151] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.235151] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[ 0.235179] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.235615] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.235644] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.235672] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.235700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.235728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.235758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.235785] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.235812] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.236025] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.236101] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.236103] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.236106] vgaarb: loaded
[ 0.236106] vgaarb: bridge control possible 0000:00:02.0
[ 0.236239] SCSI subsystem initialized
[ 0.236265] libata version 3.00 loaded.
[ 0.236280] ACPI: bus type USB registered
[ 0.236290] usbcore: registered new interface driver usbfs
[ 0.236296] usbcore: registered new interface driver hub
[ 0.236311] usbcore: registered new device driver usb
[ 0.236391] PCI: Using ACPI for IRQ routing
[ 0.237552] PCI: pci_cache_line_size set to 64 bytes
[ 0.237595] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.237596] e820: reserve RAM buffer [mem 0xc3e34000-0xc3ffffff]
[ 0.237597] e820: reserve RAM buffer [mem 0xc4286000-0xc7ffffff]
[ 0.237597] e820: reserve RAM buffer [mem 0xd8702000-0xdbffffff]
[ 0.237598] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.237599] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.237668] NetLabel: Initializing
[ 0.237669] NetLabel: domain hash size = 128
[ 0.237670] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.237677] NetLabel: unlabeled traffic allowed by default
[ 0.237716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.237720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.239742] Switched to clocksource hpet
[ 0.243330] AppArmor: AppArmor Filesystem Enabled
[ 0.243349] pnp: PnP ACPI init
[ 0.243400] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.243403] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.243498] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.243500] system 00:01: [io 0xffff] has been reserved
[ 0.243501] system 00:01: [io 0xffff] has been reserved
[ 0.243503] system 00:01: [io 0xffff] has been reserved
[ 0.243504] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.243506] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.243507] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.243509] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.243510] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.243512] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.243513] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243531] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.243559] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.243561] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.243609] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.243611] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243638] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.243640] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243772] pnp 00:06: [dma 0 disabled]
[ 0.243797] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.244046] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.244048] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.244049] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.244051] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.244052] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.244054] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.244056] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.244058] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.244059] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.244061] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.244063] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.244064] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.244066] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.244208] pnp: PnP ACPI: found 8 devices
[ 0.249930] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.249935] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.249939] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.249945] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.249947] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.249951] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.249954] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.249959] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.249974] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.249983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.249984] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.249985] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.249986] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.249987] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.249988] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.249988] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.249989] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.249990] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.249991] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.249992] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.249993] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.249994] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.249995] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.249996] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.249997] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.249998] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.249999] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.250000] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.250000] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.250001] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.250002] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.250003] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.250004] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.250005] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.250006] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.250007] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250008] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.250009] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.250009] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.250010] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.250011] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.250012] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.250013] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff]
[ 0.250030] NET: Registered protocol family 2
[ 0.250154] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.250391] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.250402] TCP: reno registered
[ 0.250414] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.250450] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.250501] NET: Registered protocol family 1
[ 0.250511] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.283830] PCI: CLS 64 bytes, default 64
[ 0.283863] Trying to unpack rootfs image as initramfs...
[ 1.908612] Freeing initrd memory: 153716K (ffff8800253b6000 - ffff88002e9d3000)
[ 1.908639] DMAR: No ATSR found
[ 1.908657] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.908658] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.908660] IOMMU: Setting RMRR:
[ 1.908668] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb000000 - 0xdf1fffff]
[ 1.908984] IOMMU: Setting identity map for device 0000:00:14.0 [0xd8891000 - 0xd889dfff]
[ 1.909005] IOMMU: Setting identity map for device 0000:00:1a.0 [0xd8891000 - 0xd889dfff]
[ 1.909023] IOMMU: Setting identity map for device 0000:00:1d.0 [0xd8891000 - 0xd889dfff]
[ 1.909036] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.909042] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.909151] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.910643] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 1.910714] Scanning for low memory corruption every 60 seconds
[ 1.910940] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.910959] Initialise system trusted keyring
[ 1.910972] audit: initializing netlink subsys (disabled)
[ 1.910982] audit: type=2000 audit(1423523261.884:1): initialized
[ 1.911199] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.912034] zpool: loaded
[ 1.912037] zbud: loaded
[ 1.912162] VFS: Disk quotas dquot_6.5.2
[ 1.912182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.912500] fuse init (API version 7.23)
[ 1.912553] msgmni has been set to 31966
[ 1.912887] Key type asymmetric registered
[ 1.912890] Asymmetric key parser 'x509' registered
[ 1.912901] bounce: pool size: 64 pages
[ 1.912920] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.912959] io scheduler noop registered
[ 1.912962] io scheduler deadline registered (default)
[ 1.912980] io scheduler cfq registered
[ 1.913086] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 1.913253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.913263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.913312] intel_idle: MWAIT substates: 0x42120
[ 1.913313] intel_idle: v0.4 model 0x3C
[ 1.913314] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.913550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.913554] ACPI: Power Button [PWRB]
[ 1.913577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.913579] ACPI: Power Button [PWRF]
[ 1.914055] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.914058] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.914185] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.914187] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.914210] GHES: HEST is not enabled!
[ 1.914266] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.934632] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.935593] Linux agpgart interface v0.103
[ 1.936322] brd: module loaded
[ 1.936697] loop: module loaded
[ 1.936962] libphy: Fixed MDIO Bus: probed
[ 1.937027] tun: Universal TUN/TAP device driver, 1.6
[ 1.937028] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.937060] PPP generic driver version 2.4.2
[ 1.937152] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.937156] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.937243] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.937255] xhci_hcd 0000:00:14.0: irq 27 for MSI/MSI-X
[ 1.937301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.937302] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.937304] usb usb1: Product: xHCI Host Controller
[ 1.937305] usb usb1: Manufacturer: Linux 3.18.7-rc1+ xhci-hcd
[ 1.937307] usb usb1: SerialNumber: 0000:00:14.0
[ 1.937373] hub 1-0:1.0: USB hub found
[ 1.937387] hub 1-0:1.0: 14 ports detected
[ 1.939474] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.939477] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.939499] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.939501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.939502] usb usb2: Product: xHCI Host Controller
[ 1.939504] usb usb2: Manufacturer: Linux 3.18.7-rc1+ xhci-hcd
[ 1.939505] usb usb2: SerialNumber: 0000:00:14.0
[ 1.939564] hub 2-0:1.0: USB hub found
[ 1.939574] hub 2-0:1.0: 6 ports detected
[ 1.940224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.940229] ehci-pci: EHCI PCI platform driver
[ 1.940285] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.940288] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.940298] ehci-pci 0000:00:1a.0: debug port 2
[ 1.944196] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.944206] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e1c000
[ 1.952465] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.952484] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.952486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.952487] usb usb3: Product: EHCI Host Controller
[ 1.952489] usb usb3: Manufacturer: Linux 3.18.7-rc1+ ehci_hcd
[ 1.952490] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.952565] hub 3-0:1.0: USB hub found
[ 1.952569] hub 3-0:1.0: 2 ports detected
[ 1.952681] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.952685] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.952694] ehci-pci 0000:00:1d.0: debug port 2
[ 1.956593] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.956602] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[ 1.968497] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.968542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.968545] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.968547] usb usb4: Product: EHCI Host Controller
[ 1.968548] usb usb4: Manufacturer: Linux 3.18.7-rc1+ ehci_hcd
[ 1.968549] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.968702] hub 4-0:1.0: USB hub found
[ 1.968707] hub 4-0:1.0: 2 ports detected
[ 1.968785] ehci-platform: EHCI generic platform driver
[ 1.968796] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.968807] ohci-pci: OHCI PCI platform driver
[ 1.968815] ohci-platform: OHCI generic platform driver
[ 1.968822] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.968849] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.971149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.971153] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.971382] mousedev: PS/2 mouse device common for all mice
[ 1.971713] rtc_cmos 00:02: RTC can wake from S4
[ 1.971890] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.971916] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.971955] device-mapper: uevent: version 1.0.3
[ 1.972001] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[ 1.972011] Intel P-state driver initializing.
[ 1.972184] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.972227] TCP: cubic registered
[ 1.972283] NET: Registered protocol family 10
[ 1.972457] NET: Registered protocol family 17
[ 1.972472] Key type dns_resolver registered
[ 1.972740] Loading compiled-in X.509 certificates
[ 1.973250] Loaded X.509 cert 'Magrathea: Glacier signing key: 3c6de3054b28707a3597898adbe0505a68d023a6'
[ 1.973269] registered taskstats version 1
[ 1.974449] Key type trusted registered
[ 1.976428] Key type encrypted registered
[ 1.976434] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.976437] evm: HMAC attrs: 0x1
[ 1.976772] Magic number: 3:157:150
[ 1.976778] bdi 1:2: hash matches
[ 1.976790] platform INT0800:00: hash matches
[ 1.976812] acpi INT0800:00: hash matches
[ 1.976871] rtc_cmos 00:02: setting system clock to 2015-02-09 23:07:42 UTC (1423523262)
[ 1.976951] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.976954] EDD information not available.
[ 1.977003] PM: Hibernation image not present or could not be loaded.
[ 1.977540] Freeing unused kernel memory: 1380K (ffffffff81d3c000 - ffffffff81e95000)
[ 1.977541] Write protecting the kernel read-only data: 12288k
[ 1.978228] Freeing unused kernel memory: 412K (ffff880001799000 - ffff880001800000)
[ 1.978813] Freeing unused kernel memory: 420K (ffff880001b97000 - ffff880001c00000)
[ 1.985077] systemd-udevd[143]: starting version 208
[ 1.985316] random: systemd-udevd urandom read with 4 bits of entropy available
[ 2.004850] ahci 0000:00:1f.2: version 3.0
[ 2.004976] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 2.005013] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 2.005018] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 2.006878] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.006891] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.012879] scsi host0: ahci
[ 2.012977] r8169 0000:03:00.0: irq 29 for MSI/MSI-X
[ 2.012979] scsi host1: ahci
[ 2.013046] scsi host2: ahci
[ 2.013114] scsi host3: ahci
[ 2.013179] scsi host4: ahci
[ 2.013274] scsi host5: ahci
[ 2.013309] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 28
[ 2.013313] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 28
[ 2.013315] ata3: DUMMY
[ 2.013316] ata4: DUMMY
[ 2.013317] ata5: DUMMY
[ 2.013317] ata6: DUMMY
[ 2.013394] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018f8000, e0:3f:49:44:d4:33, XID 0c000800 IRQ 29
[ 2.013397] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.248632] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 2.264628] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.280633] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.332665] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.332682] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.333356] ata2.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
[ 2.333359] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.334005] ata2.00: configured for UDMA/133
[ 2.347259] ata1.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
[ 2.347262] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.373612] ata1.00: configured for UDMA/133
[ 2.373747] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
[ 2.373991] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.374011] sd 0:0:0:0: [sda] Write Protect is off
[ 2.374013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.374019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.374022] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.374163] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
[ 2.374323] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.374341] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.374345] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.374428] sda: sda1 sda2
[ 2.374457] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.374459] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.374489] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.374597] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.376744] usb 1-4: New USB device found, idVendor=0424, idProduct=2412
[ 2.376747] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.377006] hub 1-4:1.0: USB hub found
[ 2.377028] hub 1-4:1.0: 2 ports detected
[ 2.397086] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 2.397089] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.397350] hub 3-1:1.0: USB hub found
[ 2.397460] hub 3-1:1.0: 6 ports detected
[ 2.413116] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.413120] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.413372] hub 4-1:1.0: USB hub found
[ 2.413481] hub 4-1:1.0: 8 ports detected
[ 2.431346] sdb: sdb1
[ 2.431858] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.488737] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 2.592729] raid6: sse2x1 12425 MB/s
[ 2.617691] usb 1-5: New USB device found, idVendor=8087, idProduct=07dc
[ 2.617693] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.660762] raid6: sse2x2 15335 MB/s
[ 2.688819] usb 1-4.1: new low-speed USB device number 4 using xhci_hcd
[ 2.728784] raid6: sse2x4 18007 MB/s
[ 2.783131] usb 1-4.1: New USB device found, idVendor=0461, idProduct=4e04
[ 2.783133] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.783135] usb 1-4.1: Product: USB NETVISTA FULL WIDTH KEYBOARD
[ 2.783136] usb 1-4.1: Manufacturer: NOVATEK
[ 2.783211] usb 1-4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.783214] usb 1-4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.788403] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.796824] raid6: avx2x1 23716 MB/s
[ 2.798449] usbcore: registered new interface driver usbhid
[ 2.798452] usbhid: USB HID core driver
[ 2.799951] input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0461:4E04.0001/input/input5
[ 2.800006] hid-generic 0003:0461:4E04.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:14.0-4.1/input0
[ 2.801119] input: NOVATEK USB NETVISTA FULL WIDTH KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0461:4E04.0002/input/input6
[ 2.801163] hid-generic 0003:0461:4E04.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB NETVISTA FULL WIDTH KEYBOARD] on usb-0000:00:14.0-4.1/input1
[ 2.864845] raid6: avx2x2 27085 MB/s
[ 2.868917] usb 1-4.2: new low-speed USB device number 5 using xhci_hcd
[ 2.908877] tsc: Refined TSC clocksource calibration: 3392.144 MHz
[ 2.932869] raid6: avx2x4 32089 MB/s
[ 2.932871] raid6: using algorithm avx2x4 (32089 MB/s)
[ 2.932873] raid6: using avx2x2 recovery algorithm
[ 2.934198] xor: automatically using best checksumming function:
[ 2.960037] usb 1-4.2: New USB device found, idVendor=04b3, idProduct=310c
[ 2.960049] usb 1-4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.960050] usb 1-4.2: Product: USB Optical Mouse
[ 2.960156] usb 1-4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.962318] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.2/1-4.2:1.0/0003:04B3:310C.0003/input/input7
[ 2.962582] hid-generic 0003:04B3:310C.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4.2/input0
[ 2.972888] avx : 37479.000 MB/sec
[ 3.026794] Btrfs loaded
[ 3.045198] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.197198] init: ureadahead main process (278) terminated with status 5
[ 3.250213] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k SSFS
[ 3.252883] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.333312] systemd-udevd[450]: starting version 208
[ 3.363501] lp: driver loaded but no devices found
[ 3.368761] ppdev: user-space parallel port driver
[ 3.388409] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 3.422924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.485336] [drm] Initialized drm 1.1.0 20060810
[ 3.501658] init: avahi-cups-reload main process (614) terminated with status 1
[ 3.524802] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 3.532476] audit: type=1400 audit(1423523264.048:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=605 comm="apparmor_parser"
[ 3.532481] audit: type=1400 audit(1423523264.048:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=605 comm="apparmor_parser"
[ 3.532484] audit: type=1400 audit(1423523264.048:4): apparmor="STATUS" operation="profile_load" name="third_party" pid=605 comm="apparmor_parser"
[ 3.538536] wmi: Mapper loaded
[ 3.566404] Bluetooth: Core ver 2.19
[ 3.566418] NET: Registered protocol family 31
[ 3.566420] Bluetooth: HCI device and connection manager initialized
[ 3.566425] Bluetooth: HCI socket layer initialized
[ 3.566427] Bluetooth: L2CAP socket layer initialized
[ 3.566432] Bluetooth: SCO socket layer initialized
[ 3.569097] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.569100] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.569101] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.569102] sound hdaudioC1D0: mono: mono_out=0x0
[ 3.569103] sound hdaudioC1D0: dig-out=0x11/0x0
[ 3.569103] sound hdaudioC1D0: inputs:
[ 3.569104] sound hdaudioC1D0: Front Mic=0x19
[ 3.569105] sound hdaudioC1D0: Rear Mic=0x18
[ 3.569106] sound hdaudioC1D0: Line=0x1a
[ 3.586287] audit: type=1400 audit(1423523264.104:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=643 comm="apparmor_parser"
[ 3.586292] audit: type=1400 audit(1423523264.104:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=643 comm="apparmor_parser"
[ 3.586295] audit: type=1400 audit(1423523264.104:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=643 comm="apparmor_parser"
[ 3.587511] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.587513] Bluetooth: BNEP filters: protocol multicast
[ 3.587518] Bluetooth: BNEP socket layer initialized
[ 3.591108] mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
[ 3.591552] mei_start:191: mei_me 0000:00:16.0: reset in start the mei device.
[ 3.595240] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.595247] mei_me_irq_thread_handler:733: mei_me 0000:00:16.0: we need to start the dev.
[ 3.595251] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.595259] mei_me_hw_start:354: mei_me 0000:00:16.0: hw is ready
[ 3.595262] mei_reset:159: mei_me 0000:00:16.0: link is established start sending messages.
[ 3.595265] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.595268] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.595283] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.595289] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000002
[ 3.595291] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000002
[ 3.595294] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000001.
[ 3.595296] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.595299] mei_hbm_dispatch:773: mei_me 0000:00:16.0: hbm: start: response message received.
[ 3.595301] mei_hbm_dispatch:782: mei_me 0000:00:16.0: HBM VERSION: DRIVER=01:01 DEVICE=01:00
[ 3.595303] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.595306] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.595311] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.595314] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.595316] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.595322] mei_start:230: mei_me 0000:00:16.0: link layer has been established.
[ 3.595612] mei_me_pg_is_enabled:666: mei_me 0000:00:16.0: pg: not supported: HGP = 0 hbm version 1.0 ?= 1.1
[ 3.595614] mei_me_probe:229: mei_me 0000:00:16.0: initialization successful.
[ 3.596144] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596149] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =0000000a
[ 3.596150] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 0000000a
[ 3.596153] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000009.
[ 3.596155] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=36 internal=0 comp=1
[ 3.596164] mei_hbm_dispatch:894: mei_me 0000:00:16.0: hbm: enumeration response: message received
[ 3.596166] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596168] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596173] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596175] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596178] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596204] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596209] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596210] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596213] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596215] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596222] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596224] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596227] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596231] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596233] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596236] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596261] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596266] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596267] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596270] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596272] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596280] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596282] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596284] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596289] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596291] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596293] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596317] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596322] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596324] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596326] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596328] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596335] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596337] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596339] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596343] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596345] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596347] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596375] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596380] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596382] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596384] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596386] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596392] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596395] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596397] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596401] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596403] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596405] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596429] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596434] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596436] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596438] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596440] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596446] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596448] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596450] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596455] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596457] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596459] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596489] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596496] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596501] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596506] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596510] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596521] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596525] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596531] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596537] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596539] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596541] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596547] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596552] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596554] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596556] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596558] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596567] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596569] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596573] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596577] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596579] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596582] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596695] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596702] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596704] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596706] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596708] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596717] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596719] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596721] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596726] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596728] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596731] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596754] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596759] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596761] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596767] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596771] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596785] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596787] mei_me_write_message:449: mei_me 0000:00:16.0: hdr:host=00 me=00 len=4 internal=0 comp=1
[ 3.596789] mei_me_write_message:452: mei_me 0000:00:16.0: empty slots = 128.
[ 3.596794] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596796] mei_hbuf_acquire:487: mei_me 0000:00:16.0: hbuf is not ready
[ 3.596799] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596829] mei_me_irq_thread_handler:712: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
[ 3.596836] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000008
[ 3.596838] mei_me_irq_thread_handler:745: mei_me 0000:00:16.0: slots to read = 00000008
[ 3.596841] mei_irq_read_handler:336: mei_me 0000:00:16.0: slots =00000007.
[ 3.596843] mei_irq_read_handler:339: mei_me 0000:00:16.0: hdr:host=00 me=00 len=28 internal=0 comp=1
[ 3.596853] mei_hbm_dispatch:863: mei_me 0000:00:16.0: hbm: properties response: message received.
[ 3.596856] mei_me_count_full_read_slots:502: mei_me 0000:00:16.0: filled_slots =00000000
[ 3.596859] mei_irq_write_handler:447: mei_me 0000:00:16.0: complete all waiting for write cb.
[ 3.596861] mei_irq_write_handler:489: mei_me 0000:00:16.0: complete control write list cb.
[ 3.596862] mei_irq_write_handler:530: mei_me 0000:00:16.0: complete write list cb.
[ 3.596864] mei_me_irq_thread_handler:777: mei_me 0000:00:16.0: interrupt thread end ret = 0
[ 3.596920] mei_host_client_init:468: mei_me 0000:00:16.0: rpm: autosuspend
[ 3.597102] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 3.597184] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 3.597245] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 3.597278] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 3.597350] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.597508] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.607106] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607121] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607133] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607143] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607153] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607162] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607170] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
[ 3.607295] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.607577] audit: type=1400 audit(1423523264.124:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=644 comm="apparmor_parser"
[ 3.621845] usbcore: registered new interface driver btusb
[ 3.632669] Bluetooth: RFCOMM TTY layer initialized
[ 3.632678] Bluetooth: RFCOMM socket layer initialized
[ 3.632681] Bluetooth: RFCOMM ver 1.11
[ 3.636871] device-mapper: multipath: version 1.7.0 loaded
[ 3.644130] Bluetooth: hci0: read Intel version: 370710018002030d2e
[ 3.644133] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[ 3.656589] AVX2 version of gcm_enc/dec engaged.
[ 3.656592] AES CTR mode by8 optimization enabled
[ 3.681543] asus_wmi: ASUS WMI generic driver loaded
[ 3.691726] asus_wmi: Initialization: 0x0
[ 3.691746] asus_wmi: BIOS WMI version: 0.9
[ 3.691779] asus_wmi: SFUN value: 0x0
[ 3.692055] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[ 3.692868] cfg80211: Calling CRDA to update world regulatory domain
[ 3.693140] asus_wmi: Disabling ACPI video driver
[ 3.743218] [drm] Memory usable by graphics device = 2048M
[ 3.743220] [drm] VT-d active for gfx access
[ 3.743221] [drm] Replacing VGA console driver
[ 3.765304] i915 0000:00:02.0: irq 32 for MSI/MSI-X
[ 3.765312] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.765313] [drm] Driver supports precise vblank timestamp query.
[ 3.765327] [drm] DMAR active, disabling use of stolen memory
[ 3.765332] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.782292] cfg80211: World regulatory domain updated:
[ 3.782294] cfg80211: DFS Master region: unset
[ 3.782296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.782297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.782298] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.782299] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.782300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.782300] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3.811202] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 3.811204] Copyright(c) 2003- 2014 Intel Corporation
[ 3.855265] init: failsafe main process (788) killed by TERM signal
[ 3.855538] fbcon: inteldrmfb (fb0) is primary device
[ 3.866366] iwlwifi 0000:02:00.0: irq 33 for MSI/MSI-X
[ 3.866767] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.866846] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 3.867025] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 3.867815] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7260-10.ucode failed with error -2
[ 3.871668] iwlwifi 0000:02:00.0: loaded firmware version 25.222.9.0 op_mode iwlmvm
[ 3.878504] Console: switching to colour frame buffer device 240x67
[ 3.881248] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.881249] i915 0000:00:02.0: registered panic notifier
[ 3.897531] snd_hda_intel 0000:00:03.0: irq 34 for MSI/MSI-X
[ 3.909338] Switched to clocksource tsc
[ 3.919878] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 3.923193] audit: type=1400 audit(1423523264.439:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=938 comm="apparmor_parser"
[ 3.923197] audit: type=1400 audit(1423523264.439:10): apparmor="STATUS" operation="profile_load" name="chromium" pid=938 comm="apparmor_parser"
[ 3.964970] systemd-logind[1027]: New seat seat0.
[ 3.965471] systemd-logind[1027]: Watching system buttons on /dev/input/event1 (Power Button)
[ 3.965519] systemd-logind[1027]: Watching system buttons on /dev/input/event11 (Video Bus)
[ 3.965564] systemd-logind[1027]: Watching system buttons on /dev/input/event0 (Power Button)
[ 4.071507] r8169 0000:03:00.0 eth0: link down
[ 4.071526] r8169 0000:03:00.0 eth0: link down
[ 4.071588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.072531] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 4.072579] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.072799] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.173549] random: nonblocking pool is initialized
[ 4.273256] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.277802] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.278024] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.297129] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4.368964] init: gdm main process (1644) killed by TERM signal
[ 4.392629] init: plymouth-upstart-bridge main process ended, respawning
[ 4.430177] systemd-logind[1027]: Failed to start unit user@111.service: Unknown unit: user@111.service
[ 4.430181] systemd-logind[1027]: Failed to start user service: Unknown unit: user@111.service
[ 4.432934] systemd-logind[1027]: New session c1 of user lightdm.
[ 4.432948] systemd-logind[1027]: Linked /tmp/.X11-unix/X0 to /run/user/111/X11-display.
[ 6.981012] r8169 0000:03:00.0 eth0: link up
[ 6.981018] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 69.704622] systemd-logind[1027]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[ 69.704627] systemd-logind[1027]: Failed to start user service: Unknown unit: user@1000.service
[ 69.706713] systemd-logind[1027]: New session 1 of user shuah.

[-- Attachment #4: dmidecode.out --]
[-- Type: text/plain, Size: 22484 bytes --]

# dmidecode 2.12
SMBIOS 2.7 present.
79 structures occupying 3055 bytes.
Table at 0x000EB920.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 0705
Release Date: 12/05/2013
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 8192 kB
Characteristics:
PCI is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 4.6

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: System76, Inc.
Product Name: Wild Dog Performance
Version: wilp10
Serial Number: System Serial Number
UUID: 21FD6EE0-D7DA-11DD-8AA1-E03F4944D433
Wake-up Type: Power Switch
SKU Number: All
Family: ASUS MB

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: H87-PLUS
Version: Rev X.0x
Serial Number: 131219712501681
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer: System76, Inc.
Type: Desktop
Lock: Not Present
Version: Desktop
Serial Number: wilp10
Asset Tag: Asset-1234567890
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: To be filled by O.E.M.

Handle 0x0004, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Keyboard
Internal Connector Type: None
External Reference Designator: PS/2 Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port

Handle 0x0005, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3_4
Internal Connector Type: None
External Reference Designator: USB3_4
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3_56
Internal Connector Type: None
External Reference Designator: USB3_56
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: GbE LAN
Internal Connector Type: None
External Reference Designator: GbE LAN
External Connector Type: RJ-45
Port Type: Network Port

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AUDIO
Internal Connector Type: None
External Reference Designator: AUDIO
External Connector Type: Other
Port Type: Audio Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: DVI
Internal Connector Type: None
External Reference Designator: DVI port
External Connector Type: Other
Port Type: Other

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SPDIFO_HDMI
Internal Connector Type: None
External Reference Designator: HDMI port
External Connector Type: Other
Port Type: Other

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_3
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_4
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_5
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SATA6G_6
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB3_12
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB7_8
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB9_10
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB11_12
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: USB13_14
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: AAFP
Internal Connector Type: Mini Jack (headphones)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CPU_FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CHA_FAN1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CHA_FAN2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: DB-9 male
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Serial Port 16550A Compatible

Handle 0x001B, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX16_1
Type: x16 PCI Express
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:01:00.0

Handle 0x001C, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX1_1
Type: x1 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:02:00.0

Handle 0x001D, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX1_2
Type: x1 PCI Express
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:ff:00.0

Handle 0x001E, DMI type 9, 17 bytes
System Slot Information
Designation: PCIEX16_2
Type: x16 PCI Express
Current Usage: Available
Length: Long
ID: 4
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:ff:00.0

Handle 0x001F, DMI type 9, 17 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 5
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:05:1c.7

Handle 0x0020, DMI type 9, 17 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 6
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:05:1d.0

Handle 0x0021, DMI type 9, 17 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 7
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:05:1d.1

Handle 0x0022, DMI type 10, 8 bytes
On Board Device 1 Information
Type: Ethernet
Status: Enabled
Description: Onboard Ethernet
On Board Device 2 Information
Type: Sound
Status: Enabled
Description: Onboard Audio

Handle 0x0023, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
String 2: To Be Filled By O.E.M.
String 3: Amber
String 4: To Be Filled By O.E.M.

Handle 0x0024, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.

Handle 0x0025, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Disabled
Administrator Password Status: Disabled
Front Panel Reset Status: Disabled

Handle 0x0026, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected

Handle 0x0027, DMI type 34, 11 bytes
Management Device
Description: Nuvoton NCT6791D
Type: Other
Address: 0x00000295
Address Type: I/O Port

Handle 0x0028, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0029, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x002A, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0027
Component Handle: 0x0027
Threshold Handle: 0x0028

Handle 0x002B, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x002C, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x002D, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0027
Component Handle: 0x002A
Threshold Handle: 0x002B

Handle 0x002E, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x002B
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1

Handle 0x002F, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x0030, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0027
Component Handle: 0x002D
Threshold Handle: 0x002E

Handle 0x0031, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x002B
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not Specified

Handle 0x0032, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x0033, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0027
Component Handle: 0x0030
Threshold Handle: 0x0031

Handle 0x0034, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0035, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x0036, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0027
Component Handle: 0x0033
Threshold Handle: 0x0031

Handle 0x0037, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0038, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0039, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0038
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1

Handle 0x003A, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x003B, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Present, OK
Type: Switching
Input Voltage Range Switching: Auto-switch
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0037
Cooling Device Handle: 0x0039
Input Current Probe Handle: 0x003A

Handle 0x003C, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:19.0

Handle 0x003D, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard 1394
Type: Other
Status: Enabled
Type Instance: 1
Bus Address: 0000:03:1c.7

Handle 0x003E, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard IGD
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0

Handle 0x003F, DMI type 139, 54 bytes
OEM-specific Type
Header and Data:
8B 36 3F 00 FE DC BA 98 76 54 32 10 04 04 32 55
F8 00 A2 02 A1 00 40 63 06 11 44 30 03 DF 40 B2
00 20 00 73 3C 10 08 00 00 00 00 00 00 00 00 00
00 00 00 00 00 01
Strings:
V1394GUID

Handle 0x0040, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: 1315
Serial Number: 16134525
Asset Tag: 9876543210
Part Number: BLS8G3D1609DS1S00.
Rank: 2
Configured Clock Speed: 1600 MHz

Handle 0x0041, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4

Handle 0x0042, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x0040
Memory Array Mapped Address Handle: 0x0047
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x0043, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelA-DIMM1
Bank Locator: BANK 1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: [Empty]
Serial Number: [Empty]
Asset Tag: 9876543210
Part Number: [Empty]
Rank: Unknown
Configured Clock Speed: Unknown

Handle 0x0044, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM0
Bank Locator: BANK 2
Type: DDR3
Type Detail: Synchronous
Speed: 1600 MHz
Manufacturer: 1315
Serial Number: 16134522
Asset Tag: 9876543210
Part Number: BLS8G3D1609DS1S00.
Rank: 2
Configured Clock Speed: 1600 MHz

Handle 0x0045, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00200000000
Ending Address: 0x003FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x0044
Memory Array Mapped Address Handle: 0x0047
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown

Handle 0x0046, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x0041
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: ChannelB-DIMM1
Bank Locator: BANK 3
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: [Empty]
Serial Number: [Empty]
Asset Tag: 9876543210
Part Number: [Empty]
Rank: Unknown
Configured Clock Speed: Unknown

Handle 0x0047, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x003FFFFFFFF
Range Size: 16 GB
Physical Array Handle: 0x0041
Partition Width: 4

Handle 0x0048, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L1
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Other
Associativity: 8-way Set-associative

Handle 0x0049, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L2
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x004A, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L3
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 kB
Maximum Size: 8192 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative

Handle 0x004E, DMI type 4, 42 bytes
Processor Information
Socket Designation: SOCKET 1150
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: C3 06 03 00 FF FB EB BF
Version: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
Voltage: 1.2 V
External Clock: 100 MHz
Max Speed: 3900 MHz
Current Speed: 3400 MHz
Status: Populated, Enabled
Upgrade: Socket BGA1155
L1 Cache Handle: 0x0048
L2 Cache Handle: 0x0049
L3 Cache Handle: 0x004A
Serial Number: Not Specified
Asset Tag: Fill By OEM
Part Number: Fill By OEM
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable

Handle 0x0053, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 53 00 35 00 00 00 00 00 00 00 00 00 00 00
F8 00 4A 8C 00 00 00 00 01 20 00 00 00 00 09 00
41 05 02 00 00 00 00 00 C8 00 FF FF 00 00 00 00
00 00 00 00 66 00 00 00 76 50 72 6F 00 00 00 00

Handle 0x0054, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 8
en|US|iso8859-1
fr|FR|iso8859-1
es|ES|iso8859-1
de|DE|iso8859-1
ru|RU|iso8859-5
ko|KR|unicode
ja|JP|unicode
zh|CN|unicode
Currently Installed Language: en|US|iso8859-1

Handle 0x0056, DMI type 127, 4 bytes
End Of Table