From: Borislav Petkov <bp@alien8.de>
To: Andy Lutomirski <luto@amacapital.net>,
Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Aristeu Rozanski <aris@redhat.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Tony Luck <tony.luck@intel.com>,
linux-edac <linux-edac@vger.kernel.org>
Subject: Re: [PATCH] sb_edac: Fix detection on SNB machines
Date: Mon, 9 Feb 2015 13:17:17 +0100 [thread overview]
Message-ID: <20150209121717.GD24769@pd.tnic> (raw)
In-Reply-To: <20150208181916.GB6290@pd.tnic>
On Sun, Feb 08, 2015 at 07:19:16PM +0100, Borislav Petkov wrote:
> On Sun, Feb 08, 2015 at 08:54:06AM -0800, Andy Lutomirski wrote:
> > If there isn't an obvious fix, I'd be okay with reverting, too. The
>
> I think the obvious fix is this:
Yes, it is, of course. If no one objects, I'll send it to Linus after
3.20-rc1 is out.
---
From: Borislav Petkov <bp@suse.de>
Subject: [PATCH] sb_edac: Fix detection on SNB machines
d0585cd815fa ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:
3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...
but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.
Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:
[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...
Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.
Fixes: d0585cd815fa ("sb_edac: Claim a different PCI device")
Cc: stable@vger.kernel.org # 3.18
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
---
drivers/edac/sb_edac.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 63aa6730e89e..1acf57ba4c86 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -2447,7 +2447,7 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_ibridge_table);
type = IVY_BRIDGE;
break;
- case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA:
+ case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0:
rc = sbridge_get_all_devices(&num_mc, pci_dev_descr_sbridge_table);
type = SANDY_BRIDGE;
break;
@@ -2460,8 +2460,11 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
type = BROADWELL;
break;
}
- if (unlikely(rc < 0))
+ if (unlikely(rc < 0)) {
+ edac_dbg(0, "couldn't get all devices for 0x%x\n", pdev->device);
goto fail0;
+ }
+
mc = 0;
list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
@@ -2474,7 +2477,7 @@ static int sbridge_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto fail1;
}
- sbridge_printk(KERN_INFO, "Driver loaded.\n");
+ sbridge_printk(KERN_INFO, "%s\n", SBRIDGE_REVISION);
mutex_unlock(&sbridge_edac_lock);
return 0;
--
2.2.0.33.gc18b867
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
next prev parent reply other threads:[~2015-02-09 12:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-05 11:50 [PATCH] sb_edac: Fix detection on SNB machines Borislav Petkov
2015-02-05 12:37 ` Borislav Petkov
2015-02-08 16:54 ` Andy Lutomirski
2015-02-08 18:19 ` Borislav Petkov
2015-02-09 12:17 ` Borislav Petkov [this message]
2015-02-09 14:20 ` Aristeu Rozanski
2015-02-09 15:23 ` Mauro Carvalho Chehab
2015-02-09 15:33 ` Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150209121717.GD24769@pd.tnic \
--to=bp@alien8.de \
--cc=aris@redhat.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=m.chehab@samsung.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox