From: Andrej Gelenberg <andrej.gelenberg@udo.edu>
To: Douglas Gilbert <dgilbert@interlog.com>
Cc: JBottomley@parallels.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org, hch@lst.de,
martin.petersen@oracle.com, elliott@hp.com
Subject: Re: CONFIG_SCSI_MQ_DEFAULT cause slow direct write speed to usb stick
Date: Wed, 11 Feb 2015 14:02:37 +0100 [thread overview]
Message-ID: <20150211140237.29101167@bigpc> (raw)
In-Reply-To: <54DA81CA.2030303@interlog.com>
Hi,
my problem was, that write speed to the device is got really slow from
7 Mb/s to 250 Kb/s, so 16.76 Mb/sec is probably the speed limitation of
the uSD Card or is close to that. Do you activated blk-mq for scsi in
kernel config or in boot parameters?
Regards,
Andrej
On Tue, 10 Feb 2015 17:10:18 -0500
Douglas Gilbert <dgilbert@interlog.com> wrote:
> Here is an example:
>
> # ddpt if=/dev/sg1 bs=512 of=x.bin
> 1953792+0 records in
> 1953792+0 records out
> 1281 retries after EAGAIN error(s) during IO
> time to transfer data: 59.678788 secs at 16.76 MB/sec
>
> That is not a bad transfer time but other utilities
> or drivers might dwell longer on those (nuisance) EAGAINs.
prev parent reply other threads:[~2015-02-11 13:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 18:50 CONFIG_SCSI_MQ_DEFAULT cause slow direct write speed to usb stick Andrej Gelenberg
2015-02-10 22:10 ` Douglas Gilbert
2015-02-11 13:02 ` Andrej Gelenberg [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150211140237.29101167@bigpc \
--to=andrej.gelenberg@udo.edu \
--cc=JBottomley@parallels.com \
--cc=dgilbert@interlog.com \
--cc=elliott@hp.com \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox