public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
	Kamil Debski <k.debski@samsung.com>,
	Jean Delvare <jdelvare@suse.de>, Kukjin Kim <kgene@kernel.org>,
	lm-sensors@lm-sensors.org,
	Linux PM list <linux-pm@vger.kernel.org>,
	"linux-samsung-soc@vger.kernel.org" 
	<linux-samsung-soc@vger.kernel.org>,
	devicetree@vger.kernel.org,
	Lukasz Majewski <l.majewski@majess.pl>,
	Kukjin Kim <kgene.kim@samsung.com>,
	linux-kernel@vger.kernel.org,
	Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
	Abhilash Kesavan <kesavan.abhilash@gmail.com>,
	Abhilash Kesavan <a.kesavan@samsung.com>
Subject: Re: [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan
Date: Wed, 25 Feb 2015 09:18:20 -0800	[thread overview]
Message-ID: <20150225171820.GA2400@roeck-us.net> (raw)
In-Reply-To: <1424878462-15511-1-git-send-email-l.majewski@samsung.com>

On Wed, Feb 25, 2015 at 04:34:16PM +0100, Lukasz Majewski wrote:
> Presented patches add support for Odroid's U3 optional CPU FAN, which uses PWM
> subsystem for low level control.
> 
> After successful probe it registers itself as a cooling device for thermal
> subsystem.
> 
> This driver also supports devices without DTS specified.
> 
> To provide correct functionality, new properties to device tree description for
> Exynos4412 and in particular Odroid U3 have been added.
> 
> Those patches were tested at Exynos4412 - Odroid U3 board.
> 
> Patches were applied on:
> linux-soc-thermal/fixes branch (Linux v4.0-rc1)
> SHA1: b71d399c7f2fe06b60b96155ec0b9ae167334e4a
> 
> Kamil Debski (1):
>   ARM: dts: Add pwm-fan node to the Odroid-U3 board
> 
> Lukasz Majewski (5):
>   Documentation: dts: Documentation entry to explain how to use PWM FAN
>     as a cooling device
>   ARM: dts: Add properties to use pwm-fan device as a cooling device in
>     Odroid U3
>   hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty
>     cycle
>   hwmon: pwm-fan: Read PWM FAN configuration from device tree
>   hwmon: pwm-fan: Code for using PWM FAN as a cooling device
> 
>  .../devicetree/bindings/hwmon/pwm-fan.txt          |  25 +++-
>  arch/arm/boot/dts/exynos4.dtsi                     |   2 +-
>  arch/arm/boot/dts/exynos4412-odroidu3.dts          |  43 ++++++
>  drivers/hwmon/pwm-fan.c                            | 166 +++++++++++++++++++--
>  4 files changed, 220 insertions(+), 16 deletions(-)
> 
For the series:

Acked-by: Guenter Roeck <linux@roeck-us.net>

Should I take it through hwmon ? Might make sense given the majority
of the changes is in hwmon code.

Thanks,
Guenter

  parent reply	other threads:[~2015-02-25 17:19 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-18 10:13 [PATCH 0/9] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-18 10:13 ` [PATCH 1/9] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2014-12-18 10:13 ` [PATCH 2/9] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:42   ` Sjoerd Simons
2014-12-19 15:32     ` Lukasz Majewski
2014-12-19 16:02       ` Guenter Roeck
2014-12-19 16:13         ` Lukasz Majewski
2015-01-05 10:50           ` Sjoerd Simons
2015-01-14 13:56             ` Lukasz Majewski
2015-01-15  8:57               ` Sjoerd Simons
2014-12-18 14:27   ` Guenter Roeck
2014-12-19 16:25     ` Lukasz Majewski
2014-12-18 10:13 ` [PATCH 3/9] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-18 10:13 ` [PATCH 4/9] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2014-12-18 10:13 ` [PATCH 5/9] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-18 10:13 ` [PATCH 6/9] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-18 10:13 ` [PATCH 7/9] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2014-12-18 10:13 ` [PATCH 8/9] hwmon: thermal: Provide 'default-pulse-width' property to setup FAN on boot Lukasz Majewski
2014-12-18 10:13 ` [PATCH 9/9] hwmon: thermal: dts: Disable FAN on boot on the Odroid U3 Lukasz Majewski
2014-12-22 16:27 ` [PATCH v2 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2014-12-22 16:27   ` [PATCH v2 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-01-02 18:54     ` Eduardo Valentin
2015-01-02 19:03       ` Eduardo Valentin
2015-01-14 15:01         ` Lukasz Majewski
2015-01-14 18:32           ` Eduardo Valentin
2015-01-15  8:43             ` Lukasz Majewski
2014-12-22 16:27   ` [PATCH v2 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-01-02 18:40     ` Eduardo Valentin
2015-01-14 15:07       ` Lukasz Majewski
2015-01-14 18:28         ` Eduardo Valentin
2014-12-22 16:27   ` [PATCH v2 3/8] hwmon: dts: Doc: Add DTS doc to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-01-02 18:51     ` Eduardo Valentin
2014-12-22 16:27   ` [PATCH v2 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2014-12-22 16:27   ` [PATCH v2 5/8] hwmon: thermal: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-01-02 18:52     ` Eduardo Valentin
2014-12-22 16:27   ` [PATCH v2 6/8] hwmon: thermal: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2014-12-29 12:52     ` Guenter Roeck
2014-12-22 16:27   ` [PATCH v2 7/8] hwmon: thermal: Read PWM FAN configuration from device tree Lukasz Majewski
2014-12-29 12:50     ` Guenter Roeck
2014-12-22 16:27   ` [PATCH v2 8/8] hwmon: thermal: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59 ` [PATCH v3 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-06 18:27     ` Guenter Roeck
2015-02-08 20:52       ` Lukasz Majewski
2015-02-06 16:59   ` [PATCH v3 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-06 18:36     ` Guenter Roeck
2015-02-08 21:36       ` Lukasz Majewski
2015-02-09  4:40         ` Guenter Roeck
2015-02-06 16:59   ` [PATCH v3 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-18 10:07 ` [PATCH v4 0/8] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-18 10:07   ` [PATCH v4 1/8] thermal: Provide stub for thermal_of_cooling_device_register() function Lukasz Majewski
2015-02-24 19:21     ` Eduardo Valentin
2015-02-25 12:26       ` Lukasz Majewski
2015-02-18 10:07   ` [PATCH v4 2/8] thermal: Provide stub for thermal_cdev_update() function Lukasz Majewski
2015-02-24 19:21     ` Eduardo Valentin
2015-02-18 10:07   ` [PATCH v4 3/8] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-24 19:25     ` Eduardo Valentin
2015-02-18 10:07   ` [PATCH v4 4/8] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-18 13:16     ` Andreas Färber
2015-02-18 10:07   ` [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-24 19:37     ` Eduardo Valentin
2015-02-25 13:28       ` Lukasz Majewski
2015-02-25 18:30         ` Eduardo Valentin
2015-02-18 10:07   ` [PATCH v4 6/8] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-18 10:07   ` [PATCH v4 7/8] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-21  0:26     ` Guenter Roeck
2015-02-23 16:13       ` Lukasz Majewski
2015-02-23 16:23         ` Guenter Roeck
2015-02-23 16:51           ` Lukasz Majewski
2015-02-23 16:59             ` Guenter Roeck
2015-02-18 10:07   ` [PATCH v4 8/8] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 15:34 ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-02-25 15:34   ` [PATCH v5 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-25 19:11     ` Eduardo Valentin
2015-02-25 19:13       ` Eduardo Valentin
2015-02-25 15:34   ` [PATCH v5 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-25 15:34   ` [PATCH v5 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-25 18:49     ` Eduardo Valentin
2015-02-25 15:34   ` [PATCH v5 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-25 15:34   ` [PATCH v5 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-25 15:34   ` [PATCH v5 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-25 18:24     ` Eduardo Valentin
2015-02-25 17:18   ` Guenter Roeck [this message]
2015-02-25 18:29     ` [PATCH v5 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Eduardo Valentin
2015-02-25 18:42       ` Guenter Roeck
2015-02-26 13:59 ` [PATCH v6 " Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-02-26 13:59   ` [PATCH v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski
2015-02-26 14:12     ` Guenter Roeck
2015-02-26 14:40       ` Lukasz Majewski
2015-03-04 12:03 ` [PATCH RESEND RESEND v6 0/6] hwmon: thermal: Odroid U3: Provide support for Odroid U3 fan Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 1/6] Documentation: dts: Documentation entry to explain how to use PWM FAN as a cooling device Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 2/6] ARM: dts: Add pwm-fan node to the Odroid-U3 board Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 3/6] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3 Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 4/6] hwmon: pwm-fan: Extract __set_pwm() function to only modify PWM duty cycle Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 5/6] hwmon: pwm-fan: Read PWM FAN configuration from device tree Lukasz Majewski
2015-03-04 12:03   ` [PATCH RESEND v6 6/6] hwmon: pwm-fan: Code for using PWM FAN as a cooling device Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150225171820.GA2400@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=a.kesavan@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=jdelvare@suse.de \
    --cc=k.debski@samsung.com \
    --cc=kesavan.abhilash@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=kgene@kernel.org \
    --cc=l.majewski@majess.pl \
    --cc=l.majewski@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=sjoerd.simons@collabora.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox