* [PATCH] clk: Missing set_phase op is an error
@ 2015-02-02 22:09 Stephen Boyd
2015-02-25 20:42 ` Mike Turquette
0 siblings, 1 reply; 2+ messages in thread
From: Stephen Boyd @ 2015-02-02 22:09 UTC (permalink / raw)
To: Mike Turquette, Stephen Boyd; +Cc: linux-kernel
If a clock's clk_ops doesn't have the set_phase op set we should
return an error from clk_set_phase(). This way clock consumers
know that when they tried to set a phase it didn't work, as
opposed to the current behavior where the return value is 0
meaning success.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index a29daf9edea4..b82714a84f5e 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2069,10 +2069,10 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
*/
int clk_set_phase(struct clk *clk, int degrees)
{
- int ret = 0;
+ int ret = -EINVAL;
if (!clk)
- goto out;
+ return 0;
/* sanity check degrees */
degrees %= 360;
@@ -2081,18 +2081,14 @@ int clk_set_phase(struct clk *clk, int degrees)
clk_prepare_lock();
- if (!clk->core->ops->set_phase)
- goto out_unlock;
-
- ret = clk->core->ops->set_phase(clk->core->hw, degrees);
+ if (clk->core->ops->set_phase)
+ ret = clk->core->ops->set_phase(clk->core->hw, degrees);
if (!ret)
clk->core->phase = degrees;
-out_unlock:
clk_prepare_unlock();
-out:
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_phase);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] clk: Missing set_phase op is an error
2015-02-02 22:09 [PATCH] clk: Missing set_phase op is an error Stephen Boyd
@ 2015-02-25 20:42 ` Mike Turquette
0 siblings, 0 replies; 2+ messages in thread
From: Mike Turquette @ 2015-02-25 20:42 UTC (permalink / raw)
To: Stephen Boyd, Stephen Boyd; +Cc: linux-kernel
Quoting Stephen Boyd (2015-02-02 14:09:43)
> If a clock's clk_ops doesn't have the set_phase op set we should
> return an error from clk_set_phase(). This way clock consumers
> know that when they tried to set a phase it didn't work, as
> opposed to the current behavior where the return value is 0
> meaning success.
>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Applied to clk-next.
Thanks,
Mike
> ---
> drivers/clk/clk.c | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index a29daf9edea4..b82714a84f5e 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -2069,10 +2069,10 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
> */
> int clk_set_phase(struct clk *clk, int degrees)
> {
> - int ret = 0;
> + int ret = -EINVAL;
>
> if (!clk)
> - goto out;
> + return 0;
>
> /* sanity check degrees */
> degrees %= 360;
> @@ -2081,18 +2081,14 @@ int clk_set_phase(struct clk *clk, int degrees)
>
> clk_prepare_lock();
>
> - if (!clk->core->ops->set_phase)
> - goto out_unlock;
> -
> - ret = clk->core->ops->set_phase(clk->core->hw, degrees);
> + if (clk->core->ops->set_phase)
> + ret = clk->core->ops->set_phase(clk->core->hw, degrees);
>
> if (!ret)
> clk->core->phase = degrees;
>
> -out_unlock:
> clk_prepare_unlock();
>
> -out:
> return ret;
> }
> EXPORT_SYMBOL_GPL(clk_set_phase);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-02-25 20:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-02 22:09 [PATCH] clk: Missing set_phase op is an error Stephen Boyd
2015-02-25 20:42 ` Mike Turquette
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox