* [PATCH] Staging: fbtft: fix space errors
@ 2015-02-28 14:44 Matteo Semenzato
2015-02-28 14:59 ` Joe Perches
2015-02-28 16:04 ` [PATCH V2] " Matteo Semenzato
0 siblings, 2 replies; 10+ messages in thread
From: Matteo Semenzato @ 2015-02-28 14:44 UTC (permalink / raw)
To: thomas.petazzoni, noralf, gregkh, linux-kernel; +Cc: devel, Matteo Semenzato
From: Matteo Semenzato <mattew8898@gmail.com>
This patch fixes the following errors:
spaces required around that '=' (ctx:VxV)
space required after that ',' (ctx:VxV)
space required after that ';' (ctx:VxV)
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
---
drivers/staging/fbtft/flexfb.c | 94 +++++++++++++++++++++---------------------
1 file changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index 90832c3..4954d96 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -74,63 +74,63 @@ static int initp_num;
/* default init sequences */
static int st7735r_init[] = { \
--1,0x01,-2,150,-1,0x11,-2,500,-1,0xB1,0x01,0x2C,0x2D,-1,0xB2,0x01,0x2C,0x2D,-1,0xB3,0x01,0x2C,0x2D,0x01,0x2C,0x2D, \
--1,0xB4,0x07,-1,0xC0,0xA2,0x02,0x84,-1,0xC1,0xC5,-1,0xC2,0x0A,0x00,-1,0xC3,0x8A,0x2A,-1,0xC4,0x8A,0xEE,-1,0xC5,0x0E, \
--1,0x20,-1,0x36,0xC0,-1,0x3A,0x05,-1,0xE0,0x0f,0x1a,0x0f,0x18,0x2f,0x28,0x20,0x22,0x1f,0x1b,0x23,0x37,0x00,0x07,0x02,0x10, \
--1,0xE1,0x0f,0x1b,0x0f,0x17,0x33,0x2c,0x29,0x2e,0x30,0x30,0x39,0x3f,0x00,0x07,0x03,0x10,-1,0x29,-2,100,-1,0x13,-2,10,-3 };
+-1, 0x01, -2, 150, -1, 0x11, -2, 500, -1, 0xB1, 0x01, 0x2C, 0x2D, -1, 0xB2, 0x01, 0x2C, 0x2D, -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, \
+-1, 0xB4, 0x07, -1, 0xC0, 0xA2, 0x02, 0x84, -1, 0xC1, 0xC5, -1, 0xC2, 0x0A, 0x00, -1, 0xC3, 0x8A, 0x2A, -1, 0xC4, 0x8A, 0xEE, -1, 0xC5, 0x0E, \
+-1, 0x20, -1, 0x36, 0xC0, -1, 0x3A, 0x05, -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10, \
+-1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10, -1, 0x29, -2, 100, -1, 0x13, -2, 10, -3 };
static int ssd1289_init[] = { \
--1,0x00,0x0001,-1,0x03,0xA8A4,-1,0x0C,0x0000,-1,0x0D,0x080C,-1,0x0E,0x2B00,-1,0x1E,0x00B7,-1,0x01,0x2B3F,-1,0x02,0x0600, \
--1,0x10,0x0000,-1,0x11,0x6070,-1,0x05,0x0000,-1,0x06,0x0000,-1,0x16,0xEF1C,-1,0x17,0x0003,-1,0x07,0x0233,-1,0x0B,0x0000, \
--1,0x0F,0x0000,-1,0x41,0x0000,-1,0x42,0x0000,-1,0x48,0x0000,-1,0x49,0x013F,-1,0x4A,0x0000,-1,0x4B,0x0000,-1,0x44,0xEF00, \
--1,0x45,0x0000,-1,0x46,0x013F,-1,0x30,0x0707,-1,0x31,0x0204,-1,0x32,0x0204,-1,0x33,0x0502,-1,0x34,0x0507,-1,0x35,0x0204, \
--1,0x36,0x0204,-1,0x37,0x0502,-1,0x3A,0x0302,-1,0x3B,0x0302,-1,0x23,0x0000,-1,0x24,0x0000,-1,0x25,0x8000,-1,0x4f,0x0000, \
--1,0x4e,0x0000,-1,0x22,-3 };
+-1, 0x00, 0x0001, -1, 0x03, 0xA8A4, -1, 0x0C, 0x0000, -1, 0x0D, 0x080C, -1, 0x0E, 0x2B00, -1, 0x1E, 0x00B7, -1, 0x01, 0x2B3F, -1, 0x02, 0x0600, \
+-1, 0x10, 0x0000, -1, 0x11, 0x6070, -1, 0x05, 0x0000, -1, 0x06, 0x0000, -1, 0x16, 0xEF1C, -1, 0x17, 0x0003, -1, 0x07, 0x0233, -1, 0x0B, 0x0000, \
+-1, 0x0F, 0x0000, -1, 0x41, 0x0000, -1, 0x42, 0x0000, -1, 0x48, 0x0000, -1, 0x49, 0x013F, -1, 0x4A, 0x0000, -1, 0x4B, 0x0000, -1, 0x44, 0xEF00, \
+-1, 0x45, 0x0000, -1, 0x46, 0x013F, -1, 0x30, 0x0707, -1, 0x31, 0x0204, -1, 0x32, 0x0204, -1, 0x33, 0x0502, -1, 0x34, 0x0507, -1, 0x35, 0x0204, \
+-1, 0x36, 0x0204, -1, 0x37, 0x0502, -1, 0x3A, 0x0302, -1, 0x3B, 0x0302, -1, 0x23, 0x0000, -1, 0x24, 0x0000, -1, 0x25, 0x8000, -1, 0x4f, 0x0000, \
+-1, 0x4e, 0x0000, -1, 0x22, -3 };
static int hx8340bn_init[] = { \
--1,0xC1,0xFF,0x83,0x40,-1,0x11,-2,150,-1,0xCA,0x70,0x00,0xD9,-1,0xB0,0x01,0x11, \
--1,0xC9,0x90,0x49,0x10,0x28,0x28,0x10,0x00,0x06,-2,20,-1,0xC2,0x60,0x71,0x01,0x0E,0x05,0x02,0x09,0x31,0x0A, \
--1,0xC3,0x67,0x30,0x61,0x17,0x48,0x07,0x05,0x33,-2,10,-1,0xB5,0x35,0x20,0x45,-1,0xB4,0x33,0x25,0x4C,-2,10, \
--1,0x3A,0x05,-1,0x29,-2,10,-3 };
+-1, 0xC1, 0xFF, 0x83, 0x40, -1, 0x11, -2, 150, -1, 0xCA, 0x70, 0x00, 0xD9, -1, 0xB0, 0x01, 0x11, \
+-1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06, -2, 20, -1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A, \
+-1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33, -2, 10, -1, 0xB5, 0x35, 0x20, 0x45, -1, 0xB4, 0x33, 0x25, 0x4C, -2, 10, \
+-1, 0x3A, 0x05, -1, 0x29, -2, 10, -3 };
static int ili9225_init[] = { \
--1,0x0001,0x011C,-1,0x0002,0x0100,-1,0x0003,0x1030,-1,0x0008,0x0808,-1,0x000C,0x0000,-1,0x000F,0x0A01,-1,0x0020,0x0000, \
--1,0x0021,0x0000,-2,50,-1,0x0010,0x0A00,-1,0x0011,0x1038,-2,50,-1,0x0012,0x1121,-1,0x0013,0x004E,-1,0x0014,0x676F, \
--1,0x0030,0x0000,-1,0x0031,0x00DB,-1,0x0032,0x0000,-1,0x0033,0x0000,-1,0x0034,0x00DB,-1,0x0035,0x0000,-1,0x0036,0x00AF, \
--1,0x0037,0x0000,-1,0x0038,0x00DB,-1,0x0039,0x0000,-1,0x0050,0x0000,-1,0x0051,0x060A,-1,0x0052,0x0D0A,-1,0x0053,0x0303, \
--1,0x0054,0x0A0D,-1,0x0055,0x0A06,-1,0x0056,0x0000,-1,0x0057,0x0303,-1,0x0058,0x0000,-1,0x0059,0x0000,-2,50, \
--1,0x0007,0x1017,-2,50,-3 };
+-1, 0x0001, 0x011C, -1, 0x0002, 0x0100, -1, 0x0003, 0x1030, -1, 0x0008, 0x0808, -1, 0x000C, 0x0000, -1, 0x000F, 0x0A01, -1, 0x0020, 0x0000, \
+-1, 0x0021, 0x0000, -2, 50, -1, 0x0010, 0x0A00, -1, 0x0011, 0x1038, -2, 50, -1, 0x0012, 0x1121, -1, 0x0013, 0x004E, -1, 0x0014, 0x676F, \
+-1, 0x0030, 0x0000, -1, 0x0031, 0x00DB, -1, 0x0032, 0x0000, -1, 0x0033, 0x0000, -1, 0x0034, 0x00DB, -1, 0x0035, 0x0000, -1, 0x0036, 0x00AF, \
+-1, 0x0037, 0x0000, -1, 0x0038, 0x00DB, -1, 0x0039, 0x0000, -1, 0x0050, 0x0000, -1, 0x0051, 0x060A, -1, 0x0052, 0x0D0A, -1, 0x0053, 0x0303, \
+-1, 0x0054, 0x0A0D, -1, 0x0055, 0x0A06, -1, 0x0056, 0x0000, -1, 0x0057, 0x0303, -1, 0x0058, 0x0000, -1, 0x0059, 0x0000, -2, 50, \
+-1, 0x0007, 0x1017, -2, 50, -3 };
static int ili9320_init[] = { \
--1,0x00E5,0x8000,-1,0x0000,0x0001,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000,-1,0x0008,0x0202, \
--1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007, \
--1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x17B0,-1,0x0011,0x0031,-2,50,-1,0x0012,0x0138,-2,50,-1,0x0013,0x1800, \
--1,0x0029,0x0008,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0505,-1,0x0032,0x0004, \
--1,0x0035,0x0006,-1,0x0036,0x0707,-1,0x0037,0x0105,-1,0x0038,0x0002,-1,0x0039,0x0707,-1,0x003C,0x0704,-1,0x003D,0x0807, \
--1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0x2700,-1,0x0061,0x0001,-1,0x006A,0x0000, \
--1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010, \
--1,0x0092,0x0000,-1,0x0093,0x0003,-1,0x0095,0x0110,-1,0x0097,0x0000,-1,0x0098,0x0000,-1,0x0007,0x0173,-3 };
+-1, 0x00E5, 0x8000, -1, 0x0000, 0x0001, -1, 0x0001, 0x0100, -1, 0x0002, 0x0700, -1, 0x0003, 0x1030, -1, 0x0004, 0x0000, -1, 0x0008, 0x0202, \
+-1, 0x0009, 0x0000, -1, 0x000A, 0x0000, -1, 0x000C, 0x0000, -1, 0x000D, 0x0000, -1, 0x000F, 0x0000, -1, 0x0010, 0x0000, -1, 0x0011, 0x0007, \
+-1, 0x0012, 0x0000, -1, 0x0013, 0x0000, -2, 200, -1, 0x0010, 0x17B0, -1, 0x0011, 0x0031, -2, 50, -1, 0x0012, 0x0138, -2, 50, -1, 0x0013, 0x1800, \
+-1, 0x0029, 0x0008, -2, 50, -1, 0x0020, 0x0000, -1, 0x0021, 0x0000, -1, 0x0030, 0x0000, -1, 0x0031, 0x0505, -1, 0x0032, 0x0004, \
+-1, 0x0035, 0x0006, -1, 0x0036, 0x0707, -1, 0x0037, 0x0105, -1, 0x0038, 0x0002, -1, 0x0039, 0x0707, -1, 0x003C, 0x0704, -1, 0x003D, 0x0807, \
+-1, 0x0050, 0x0000, -1, 0x0051, 0x00EF, -1, 0x0052, 0x0000, -1, 0x0053, 0x013F, -1, 0x0060, 0x2700, -1, 0x0061, 0x0001, -1, 0x006A, 0x0000, \
+-1, 0x0080, 0x0000, -1, 0x0081, 0x0000, -1, 0x0082, 0x0000, -1, 0x0083, 0x0000, -1, 0x0084, 0x0000, -1, 0x0085, 0x0000, -1, 0x0090, 0x0010, \
+-1, 0x0092, 0x0000, -1, 0x0093, 0x0003, -1, 0x0095, 0x0110, -1, 0x0097, 0x0000, -1, 0x0098, 0x0000, -1, 0x0007, 0x0173, -3 };
static int ili9325_init[] = { \
--1,0x00E3,0x3008,-1,0x00E7,0x0012,-1,0x00EF,0x1231,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000, \
--1,0x0008,0x0207,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000, \
--1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x1690,-1,0x0011,0x0223,-2,50,-1,0x0012,0x000D,-2,50, \
--1,0x0013,0x1200,-1,0x0029,0x000A,-1,0x002B,0x000C,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000, \
--1,0x0031,0x0506,-1,0x0032,0x0104,-1,0x0035,0x0207,-1,0x0036,0x000F,-1,0x0037,0x0306,-1,0x0038,0x0102,-1,0x0039,0x0707, \
--1,0x003C,0x0702,-1,0x003D,0x1604,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0xA700, \
--1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000, \
--1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0600,-1,0x0007,0x0133,-3 };
+-1, 0x00E3, 0x3008, -1, 0x00E7, 0x0012, -1, 0x00EF, 0x1231, -1, 0x0001, 0x0100, -1, 0x0002, 0x0700, -1, 0x0003, 0x1030, -1, 0x0004, 0x0000, \
+-1, 0x0008, 0x0207, -1, 0x0009, 0x0000, -1, 0x000A, 0x0000, -1, 0x000C, 0x0000, -1, 0x000D, 0x0000, -1, 0x000F, 0x0000, -1, 0x0010, 0x0000, \
+-1, 0x0011, 0x0007, -1, 0x0012, 0x0000, -1, 0x0013, 0x0000, -2, 200, -1, 0x0010, 0x1690, -1, 0x0011, 0x0223, -2, 50, -1, 0x0012, 0x000D, -2, 50, \
+-1, 0x0013, 0x1200, -1, 0x0029, 0x000A, -1, 0x002B, 0x000C, -2, 50, -1, 0x0020, 0x0000, -1, 0x0021, 0x0000, -1, 0x0030, 0x0000, \
+-1, 0x0031, 0x0506, -1, 0x0032, 0x0104, -1, 0x0035, 0x0207, -1, 0x0036, 0x000F, -1, 0x0037, 0x0306, -1, 0x0038, 0x0102, -1, 0x0039, 0x0707, \
+-1, 0x003C, 0x0702, -1, 0x003D, 0x1604, -1, 0x0050, 0x0000, -1, 0x0051, 0x00EF, -1, 0x0052, 0x0000, -1, 0x0053, 0x013F, -1, 0x0060, 0xA700, \
+-1, 0x0061, 0x0001, -1, 0x006A, 0x0000, -1, 0x0080, 0x0000, -1, 0x0081, 0x0000, -1, 0x0082, 0x0000, -1, 0x0083, 0x0000, -1, 0x0084, 0x0000, \
+-1, 0x0085, 0x0000, -1, 0x0090, 0x0010, -1, 0x0092, 0x0600, -1, 0x0007, 0x0133, -3 };
static int ili9341_init[] = { \
--1,0x28,-2,20,-1,0xCF,0x00,0x83,0x30,-1,0xED,0x64,0x03,0x12,0x81,-1,0xE8,0x85,0x01,0x79, \
--1,0xCB,0x39,0x2c,0x00,0x34,0x02,-1,0xF7,0x20,-1,0xEA,0x00,0x00,-1,0xC0,0x26,-1,0xC1,0x11, \
--1,0xC5,0x35,0x3E,-1,0xC7,0xBE,-1,0xB1,0x00,0x1B,-1,0xB6,0x0a,0x82,0x27,0x00,-1,0xB7,0x07, \
--1,0x3A,0x55,-1,0x36,0x48,-1,0x11,-2,120,-1,0x29,-2,20,-3 };
+-1, 0x28, -2, 20, -1, 0xCF, 0x00, 0x83, 0x30, -1, 0xED, 0x64, 0x03, 0x12, 0x81, -1, 0xE8, 0x85, 0x01, 0x79, \
+-1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02, -1, 0xF7, 0x20, -1, 0xEA, 0x00, 0x00, -1, 0xC0, 0x26, -1, 0xC1, 0x11, \
+-1, 0xC5, 0x35, 0x3E, -1, 0xC7, 0xBE, -1, 0xB1, 0x00, 0x1B, -1, 0xB6, 0x0a, 0x82, 0x27, 0x00, -1, 0xB7, 0x07, \
+-1, 0x3A, 0x55, -1, 0x36, 0x48, -1, 0x11, -2, 120, -1, 0x29, -2, 20, -3 };
-static int ssd1351_init[] = { -1,0xfd,0x12,-1,0xfd,0xb1,-1,0xae,-1,0xb3,0xf1,-1,0xca,0x7f,-1,0xa0,0x74, \
- -1,0x15,0x00,0x7f,-1,0x75,0x00,0x7f,-1,0xa1,0x00,-1,0xa2,0x00,-1,0xb5,0x00, \
- -1,0xab,0x01,-1,0xb1,0x32,-1,0xb4,0xa0,0xb5,0x55,-1,0xbb,0x17,-1,0xbe,0x05, \
- -1,0xc1,0xc8,0x80,0xc8,-1,0xc7,0x0f,-1,0xb6,0x01,-1,0xa6,-1,0xaf,-3 };
+static int ssd1351_init[] = { -1, 0xfd, 0x12, -1, 0xfd, 0xb1, -1, 0xae, -1, 0xb3, 0xf1, -1, 0xca, 0x7f, -1, 0xa0, 0x74, \
+ -1, 0x15, 0x00, 0x7f, -1, 0x75, 0x00, 0x7f, -1, 0xa1, 0x00, -1, 0xa2, 0x00, -1, 0xb5, 0x00, \
+ -1, 0xab, 0x01, -1, 0xb1, 0x32, -1, 0xb4, 0xa0, 0xb5, 0x55, -1, 0xbb, 0x17, -1, 0xbe, 0x05, \
+ -1, 0xc1, 0xc8, 0x80, 0xc8, -1, 0xc7, 0x0f, -1, 0xb6, 0x01, -1, 0xa6, -1, 0xaf, -3 };
/* ili9320, ili9325 */
@@ -232,8 +232,8 @@ static int flexfb_verify_gpios_db(struct fbtft_par *par)
return -EINVAL;
}
if (latched)
- num_db=buswidth/2;
- for (i=0;i < num_db;i++) {
+ num_db = buswidth/2;
+ for (i = 0; i < num_db; i++) {
if (par->gpio.db[i] < 0) {
dev_err(par->info->device, "Missing info about 'db%02d' gpio. Aborting.\n", i);
return -EINVAL;
@@ -423,7 +423,7 @@ static int flexfb_probe_common(struct spi_device *sdev, struct platform_device *
}
par->fbtftops.write_register = fbtft_write_reg8_bus9;
par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- sdev->bits_per_word=9;
+ sdev->bits_per_word = 9;
ret = sdev->master->setup(sdev);
if (ret) {
dev_warn(dev,
--
2.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-02-28 14:44 [PATCH] Staging: fbtft: fix space errors Matteo Semenzato
@ 2015-02-28 14:59 ` Joe Perches
2015-03-02 9:37 ` Dan Carpenter
2015-02-28 16:04 ` [PATCH V2] " Matteo Semenzato
1 sibling, 1 reply; 10+ messages in thread
From: Joe Perches @ 2015-02-28 14:59 UTC (permalink / raw)
To: Matteo Semenzato; +Cc: thomas.petazzoni, noralf, gregkh, linux-kernel, devel
On Sat, 2015-02-28 at 15:44 +0100, Matteo Semenzato wrote:
> This patch fixes the following errors:
> spaces required around that '=' (ctx:VxV)
> space required after that ',' (ctx:VxV)
> space required after that ';' (ctx:VxV)
[]
> diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
[]
> @@ -74,63 +74,63 @@ static int initp_num;
>
> /* default init sequences */
> static int st7735r_init[] = { \
> --1,0x01,-2,150,-1,0x11,-2,500,-1,0xB1,0x01,0x2C,0x2D,-1,0xB2,0x01,0x2C,0x2D,-1,0xB3,0x01,0x2C,0x2D,0x01,0x2C,0x2D, \
> --1,0xB4,0x07,-1,0xC0,0xA2,0x02,0x84,-1,0xC1,0xC5,-1,0xC2,0x0A,0x00,-1,0xC3,0x8A,0x2A,-1,0xC4,0x8A,0xEE,-1,0xC5,0x0E, \
> --1,0x20,-1,0x36,0xC0,-1,0x3A,0x05,-1,0xE0,0x0f,0x1a,0x0f,0x18,0x2f,0x28,0x20,0x22,0x1f,0x1b,0x23,0x37,0x00,0x07,0x02,0x10, \
> --1,0xE1,0x0f,0x1b,0x0f,0x17,0x33,0x2c,0x29,0x2e,0x30,0x30,0x39,0x3f,0x00,0x07,0x03,0x10,-1,0x29,-2,100,-1,0x13,-2,10,-3 };
> +-1, 0x01, -2, 150, -1, 0x11, -2, 500, -1, 0xB1, 0x01, 0x2C, 0x2D, -1, 0xB2, 0x01, 0x2C, 0x2D, -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, \
> +-1, 0xB4, 0x07, -1, 0xC0, 0xA2, 0x02, 0x84, -1, 0xC1, 0xC5, -1, 0xC2, 0x0A, 0x00, -1, 0xC3, 0x8A, 0x2A, -1, 0xC4, 0x8A, 0xEE, -1, 0xC5, 0x0E, \
> +-1, 0x20, -1, 0x36, 0xC0, -1, 0x3A, 0x05, -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10, \
> +-1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10, -1, 0x29, -2, 100, -1, 0x13, -2, 10, -3 };
If you're really going to change these, please
remove the unnecessary \ line continuations
indent the blocks properly and group the blocks
more intelligibly. Maybe something like;
static const int st7735r_init[] = {
-1, 0x01,
-2, 150,
-1, 0x11,
-2, 500,
-1, 0xB1, 0x01, 0x2C, 0x2D,
-1, 0xB2, 0x01, 0x2C, 0x2D,
-1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
-1, 0xB4, 0x07,
-1, 0xC0, 0xA2, 0x02, 0x84,
-1, 0xC1, 0xC5,
-1, 0xC2, 0x0A, 0x00,
-1, 0xC3, 0x8A, 0x2A,
-1, 0xC4, 0x8A, 0xEE,
-1, 0xC5, 0x0E,
-1, 0x20,
-1, 0x36, 0xC0,
-1, 0x3A, 0x05,
-1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f, 0x1b,
0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
-1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30, 0x30,
0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
-1, 0x29,
-2, 100,
-1, 0x13,
-2, 10,
-3
};
etc...
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-02-28 14:59 ` Joe Perches
@ 2015-03-02 9:37 ` Dan Carpenter
2015-03-02 14:20 ` Joe Perches
0 siblings, 1 reply; 10+ messages in thread
From: Dan Carpenter @ 2015-03-02 9:37 UTC (permalink / raw)
To: Joe Perches; +Cc: Matteo Semenzato, gregkh, noralf, linux-kernel, devel
On Sat, Feb 28, 2015 at 06:59:19AM -0800, Joe Perches wrote:
> If you're really going to change these, please
> remove the unnecessary \ line continuations
> indent the blocks properly and group the blocks
> more intelligibly. Maybe something like;
>
> static const int st7735r_init[] = {
> -1, 0x01,
> -2, 150,
> -1, 0x11,
> -2, 500,
> -1, 0xB1, 0x01, 0x2C, 0x2D,
> -1, 0xB2, 0x01, 0x2C, 0x2D,
> -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
> -1, 0xB4, 0x07,
> -1, 0xC0, 0xA2, 0x02, 0x84,
> -1, 0xC1, 0xC5,
> -1, 0xC2, 0x0A, 0x00,
> -1, 0xC3, 0x8A, 0x2A,
> -1, 0xC4, 0x8A, 0xEE,
> -1, 0xC5, 0x0E,
> -1, 0x20,
> -1, 0x36, 0xC0,
> -1, 0x3A, 0x05,
> -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f, 0x1b,
> 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
> -1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30, 0x30,
> 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
> -1, 0x29,
> -2, 100,
> -1, 0x13,
> -2, 10,
> -3
> };
What's the logic here? Why are we putting the negatives first?
regards,
dan carpenter
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-03-02 9:37 ` Dan Carpenter
@ 2015-03-02 14:20 ` Joe Perches
2015-03-02 19:21 ` Andrey Skvortsov
0 siblings, 1 reply; 10+ messages in thread
From: Joe Perches @ 2015-03-02 14:20 UTC (permalink / raw)
To: Dan Carpenter; +Cc: Matteo Semenzato, gregkh, noralf, linux-kernel, devel
On Mon, 2015-03-02 at 12:37 +0300, Dan Carpenter wrote:
> On Sat, Feb 28, 2015 at 06:59:19AM -0800, Joe Perches wrote:
> > If you're really going to change these, please
> > remove the unnecessary \ line continuations
> > indent the blocks properly and group the blocks
> > more intelligibly. Maybe something like;
> >
> > static const int st7735r_init[] = {
> > -1, 0x01,
[]
> > -2, 10,
> > -3
> > };
>
> What's the logic here? Why are we putting the negatives first?
Those are delimiters. see fbtft-core.c:fbtft_init_display().
As far as I understand:
-1, start of block
-2, millisecond delay after block write
-3, end of blocks
Beyond that, I don't much care.
I just prefer intelligible over apparently random.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-03-02 14:20 ` Joe Perches
@ 2015-03-02 19:21 ` Andrey Skvortsov
2015-03-02 19:39 ` Noralf Trønnes
0 siblings, 1 reply; 10+ messages in thread
From: Andrey Skvortsov @ 2015-03-02 19:21 UTC (permalink / raw)
To: Joe Perches
Cc: Dan Carpenter, devel, gregkh, Matteo Semenzato, noralf,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 978 bytes --]
On 02 Mar, Joe Perches wrote:
> On Mon, 2015-03-02 at 12:37 +0300, Dan Carpenter wrote:
> > On Sat, Feb 28, 2015 at 06:59:19AM -0800, Joe Perches wrote:
> > > If you're really going to change these, please
> > > remove the unnecessary \ line continuations
> > > indent the blocks properly and group the blocks
> > > more intelligibly. Maybe something like;
> > >
> > > static const int st7735r_init[] = {
> > > -1, 0x01,
> []
> > > -2, 10,
> > > -3
> > > };
> >
> > What's the logic here? Why are we putting the negatives first?
>
> Those are delimiters. see fbtft-core.c:fbtft_init_display().
>
> As far as I understand:
>
> -1, start of block
> -2, millisecond delay after block write
> -3, end of blocks
>
> Beyond that, I don't much care.
> I just prefer intelligible over apparently random.
If it is correct, then it would be better to replace these magic numbers with meaningful
defines.
--
Best regards,
Andrey Skvortsov
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-03-02 19:21 ` Andrey Skvortsov
@ 2015-03-02 19:39 ` Noralf Trønnes
0 siblings, 0 replies; 10+ messages in thread
From: Noralf Trønnes @ 2015-03-02 19:39 UTC (permalink / raw)
To: Andrey Skvortsov, Joe Perches, Dan Carpenter, devel, gregkh,
Matteo Semenzato, linux-kernel
Den 02.03.2015 20:21, skrev Andrey Skvortsov:
> On 02 Mar, Joe Perches wrote:
>> On Mon, 2015-03-02 at 12:37 +0300, Dan Carpenter wrote:
>>> On Sat, Feb 28, 2015 at 06:59:19AM -0800, Joe Perches wrote:
>>>> If you're really going to change these, please
>>>> remove the unnecessary \ line continuations
>>>> indent the blocks properly and group the blocks
>>>> more intelligibly. Maybe something like;
>>>>
>>>> static const int st7735r_init[] = {
>>>> -1, 0x01,
>> []
>>>> -2, 10,
>>>> -3
>>>> };
>>> What's the logic here? Why are we putting the negatives first?
>> Those are delimiters. see fbtft-core.c:fbtft_init_display().
>>
>> As far as I understand:
>>
>> -1, start of block
>> -2, millisecond delay after block write
>> -3, end of blocks
>>
>> Beyond that, I don't much care.
>> I just prefer intelligible over apparently random.
> If it is correct, then it would be better to replace these magic numbers with meaningful
> defines.
>
I agree with that in principal, but I'm not convinced that there is any
point in cleaning up this. It should be reworked in another way.
One problem with these drivers is that they are controller centric.
They have a default init sequence matching some, but not all display panels.
The result of this is that in the Device Tree case, the (ugly) init sequence
is passed in through a DT property string. This will never be accepted by
the DT guys. Register init seq. in any form in DT seem to be generally not
accepted. So I guess the drivers have to be display centric instead.
Each having hardcoded the register init sequence with necessary delays.
I have made an attempt to address this in a RFC I posted earlier today:
staging: fbtft: minimize coupling to the fbdev subsystem
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2015-March/065985.html
Noralf.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2] Staging: fbtft: fix space errors
2015-02-28 14:44 [PATCH] Staging: fbtft: fix space errors Matteo Semenzato
2015-02-28 14:59 ` Joe Perches
@ 2015-02-28 16:04 ` Matteo Semenzato
1 sibling, 0 replies; 10+ messages in thread
From: Matteo Semenzato @ 2015-02-28 16:04 UTC (permalink / raw)
To: thomas.petazzoni, noralf, gregkh; +Cc: devel, linux-kernel, Matteo Semenzato
From: Matteo Semenzato <mattew8898@gmail.com>
This patch fixes the following errors:
spaces required around that '=' (ctx:VxV)
space required after that ',' (ctx:VxV)
space required after that ';' (ctx:VxV)
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
---
drivers/staging/fbtft/flexfb.c | 366 ++++++++++++++++++++++++++++++++++-------
1 file changed, 305 insertions(+), 61 deletions(-)
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index 90832c3..b1fe448 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -73,64 +73,308 @@ static int *initp;
static int initp_num;
/* default init sequences */
-static int st7735r_init[] = { \
--1,0x01,-2,150,-1,0x11,-2,500,-1,0xB1,0x01,0x2C,0x2D,-1,0xB2,0x01,0x2C,0x2D,-1,0xB3,0x01,0x2C,0x2D,0x01,0x2C,0x2D, \
--1,0xB4,0x07,-1,0xC0,0xA2,0x02,0x84,-1,0xC1,0xC5,-1,0xC2,0x0A,0x00,-1,0xC3,0x8A,0x2A,-1,0xC4,0x8A,0xEE,-1,0xC5,0x0E, \
--1,0x20,-1,0x36,0xC0,-1,0x3A,0x05,-1,0xE0,0x0f,0x1a,0x0f,0x18,0x2f,0x28,0x20,0x22,0x1f,0x1b,0x23,0x37,0x00,0x07,0x02,0x10, \
--1,0xE1,0x0f,0x1b,0x0f,0x17,0x33,0x2c,0x29,0x2e,0x30,0x30,0x39,0x3f,0x00,0x07,0x03,0x10,-1,0x29,-2,100,-1,0x13,-2,10,-3 };
-
-static int ssd1289_init[] = { \
--1,0x00,0x0001,-1,0x03,0xA8A4,-1,0x0C,0x0000,-1,0x0D,0x080C,-1,0x0E,0x2B00,-1,0x1E,0x00B7,-1,0x01,0x2B3F,-1,0x02,0x0600, \
--1,0x10,0x0000,-1,0x11,0x6070,-1,0x05,0x0000,-1,0x06,0x0000,-1,0x16,0xEF1C,-1,0x17,0x0003,-1,0x07,0x0233,-1,0x0B,0x0000, \
--1,0x0F,0x0000,-1,0x41,0x0000,-1,0x42,0x0000,-1,0x48,0x0000,-1,0x49,0x013F,-1,0x4A,0x0000,-1,0x4B,0x0000,-1,0x44,0xEF00, \
--1,0x45,0x0000,-1,0x46,0x013F,-1,0x30,0x0707,-1,0x31,0x0204,-1,0x32,0x0204,-1,0x33,0x0502,-1,0x34,0x0507,-1,0x35,0x0204, \
--1,0x36,0x0204,-1,0x37,0x0502,-1,0x3A,0x0302,-1,0x3B,0x0302,-1,0x23,0x0000,-1,0x24,0x0000,-1,0x25,0x8000,-1,0x4f,0x0000, \
--1,0x4e,0x0000,-1,0x22,-3 };
-
-static int hx8340bn_init[] = { \
--1,0xC1,0xFF,0x83,0x40,-1,0x11,-2,150,-1,0xCA,0x70,0x00,0xD9,-1,0xB0,0x01,0x11, \
--1,0xC9,0x90,0x49,0x10,0x28,0x28,0x10,0x00,0x06,-2,20,-1,0xC2,0x60,0x71,0x01,0x0E,0x05,0x02,0x09,0x31,0x0A, \
--1,0xC3,0x67,0x30,0x61,0x17,0x48,0x07,0x05,0x33,-2,10,-1,0xB5,0x35,0x20,0x45,-1,0xB4,0x33,0x25,0x4C,-2,10, \
--1,0x3A,0x05,-1,0x29,-2,10,-3 };
-
-static int ili9225_init[] = { \
--1,0x0001,0x011C,-1,0x0002,0x0100,-1,0x0003,0x1030,-1,0x0008,0x0808,-1,0x000C,0x0000,-1,0x000F,0x0A01,-1,0x0020,0x0000, \
--1,0x0021,0x0000,-2,50,-1,0x0010,0x0A00,-1,0x0011,0x1038,-2,50,-1,0x0012,0x1121,-1,0x0013,0x004E,-1,0x0014,0x676F, \
--1,0x0030,0x0000,-1,0x0031,0x00DB,-1,0x0032,0x0000,-1,0x0033,0x0000,-1,0x0034,0x00DB,-1,0x0035,0x0000,-1,0x0036,0x00AF, \
--1,0x0037,0x0000,-1,0x0038,0x00DB,-1,0x0039,0x0000,-1,0x0050,0x0000,-1,0x0051,0x060A,-1,0x0052,0x0D0A,-1,0x0053,0x0303, \
--1,0x0054,0x0A0D,-1,0x0055,0x0A06,-1,0x0056,0x0000,-1,0x0057,0x0303,-1,0x0058,0x0000,-1,0x0059,0x0000,-2,50, \
--1,0x0007,0x1017,-2,50,-3 };
-
-static int ili9320_init[] = { \
--1,0x00E5,0x8000,-1,0x0000,0x0001,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000,-1,0x0008,0x0202, \
--1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000,-1,0x0011,0x0007, \
--1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x17B0,-1,0x0011,0x0031,-2,50,-1,0x0012,0x0138,-2,50,-1,0x0013,0x1800, \
--1,0x0029,0x0008,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000,-1,0x0031,0x0505,-1,0x0032,0x0004, \
--1,0x0035,0x0006,-1,0x0036,0x0707,-1,0x0037,0x0105,-1,0x0038,0x0002,-1,0x0039,0x0707,-1,0x003C,0x0704,-1,0x003D,0x0807, \
--1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0x2700,-1,0x0061,0x0001,-1,0x006A,0x0000, \
--1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000,-1,0x0085,0x0000,-1,0x0090,0x0010, \
--1,0x0092,0x0000,-1,0x0093,0x0003,-1,0x0095,0x0110,-1,0x0097,0x0000,-1,0x0098,0x0000,-1,0x0007,0x0173,-3 };
-
-static int ili9325_init[] = { \
--1,0x00E3,0x3008,-1,0x00E7,0x0012,-1,0x00EF,0x1231,-1,0x0001,0x0100,-1,0x0002,0x0700,-1,0x0003,0x1030,-1,0x0004,0x0000, \
--1,0x0008,0x0207,-1,0x0009,0x0000,-1,0x000A,0x0000,-1,0x000C,0x0000,-1,0x000D,0x0000,-1,0x000F,0x0000,-1,0x0010,0x0000, \
--1,0x0011,0x0007,-1,0x0012,0x0000,-1,0x0013,0x0000,-2,200,-1,0x0010,0x1690,-1,0x0011,0x0223,-2,50,-1,0x0012,0x000D,-2,50, \
--1,0x0013,0x1200,-1,0x0029,0x000A,-1,0x002B,0x000C,-2,50,-1,0x0020,0x0000,-1,0x0021,0x0000,-1,0x0030,0x0000, \
--1,0x0031,0x0506,-1,0x0032,0x0104,-1,0x0035,0x0207,-1,0x0036,0x000F,-1,0x0037,0x0306,-1,0x0038,0x0102,-1,0x0039,0x0707, \
--1,0x003C,0x0702,-1,0x003D,0x1604,-1,0x0050,0x0000,-1,0x0051,0x00EF,-1,0x0052,0x0000,-1,0x0053,0x013F,-1,0x0060,0xA700, \
--1,0x0061,0x0001,-1,0x006A,0x0000,-1,0x0080,0x0000,-1,0x0081,0x0000,-1,0x0082,0x0000,-1,0x0083,0x0000,-1,0x0084,0x0000, \
--1,0x0085,0x0000,-1,0x0090,0x0010,-1,0x0092,0x0600,-1,0x0007,0x0133,-3 };
-
-static int ili9341_init[] = { \
--1,0x28,-2,20,-1,0xCF,0x00,0x83,0x30,-1,0xED,0x64,0x03,0x12,0x81,-1,0xE8,0x85,0x01,0x79, \
--1,0xCB,0x39,0x2c,0x00,0x34,0x02,-1,0xF7,0x20,-1,0xEA,0x00,0x00,-1,0xC0,0x26,-1,0xC1,0x11, \
--1,0xC5,0x35,0x3E,-1,0xC7,0xBE,-1,0xB1,0x00,0x1B,-1,0xB6,0x0a,0x82,0x27,0x00,-1,0xB7,0x07, \
--1,0x3A,0x55,-1,0x36,0x48,-1,0x11,-2,120,-1,0x29,-2,20,-3 };
-
-static int ssd1351_init[] = { -1,0xfd,0x12,-1,0xfd,0xb1,-1,0xae,-1,0xb3,0xf1,-1,0xca,0x7f,-1,0xa0,0x74, \
- -1,0x15,0x00,0x7f,-1,0x75,0x00,0x7f,-1,0xa1,0x00,-1,0xa2,0x00,-1,0xb5,0x00, \
- -1,0xab,0x01,-1,0xb1,0x32,-1,0xb4,0xa0,0xb5,0x55,-1,0xbb,0x17,-1,0xbe,0x05, \
- -1,0xc1,0xc8,0x80,0xc8,-1,0xc7,0x0f,-1,0xb6,0x01,-1,0xa6,-1,0xaf,-3 };
+static int st7735r_init[] = {
+ -1, 0x01,
+ -2, 150,
+ -1, 0x11,
+ -2, 500,
+ -1, 0xB1, 0x01, 0x2C, 0x2D,
+ -1, 0xB2, 0x01, 0x2C, 0x2D,
+ -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
+ -1, 0xB4, 0x07,
+ -1, 0xC0, 0xA2, 0x02, 0x84,
+ -1, 0xC1, 0xC5,
+ -1, 0xC2, 0x0A, 0x00,
+ -1, 0xC3, 0x8A, 0x2A,
+ -1, 0xC4, 0x8A, 0xEE,
+ -1, 0xC5, 0x0E,
+ -1, 0x20,
+ -1, 0x36, 0xC0,
+ -1, 0x3A, 0x05,
+ -1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22,
+ 0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
+ -1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e,
+ 0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
+ -1, 0x29,
+ -2, 100,
+ -1, 0x13,
+ -2, 10,
+ -3
+};
+static int ssd1289_init[] = {
+ -1, 0x00, 0x0001,
+ -1, 0x03, 0xA8A4,
+ -1, 0x0C, 0x0000,
+ -1, 0x0D, 0x080C,
+ -1, 0x0E, 0x2B00,
+ -1, 0x1E, 0x00B7,
+ -1, 0x01, 0x2B3F,
+ -1, 0x02, 0x0600,
+ -1, 0x10, 0x0000,
+ -1, 0x11, 0x6070,
+ -1, 0x05, 0x0000,
+ -1, 0x06, 0x0000,
+ -1, 0x16, 0xEF1C,
+ -1, 0x17, 0x0003,
+ -1, 0x07, 0x0233,
+ -1, 0x0B, 0x0000,
+ -1, 0x0F, 0x0000,
+ -1, 0x41, 0x0000,
+ -1, 0x42, 0x0000,
+ -1, 0x48, 0x0000,
+ -1, 0x49, 0x013F, -1, 0x4A, 0x0000,
+ -1, 0x4B, 0x0000,
+ -1, 0x44, 0xEF00,
+ -1, 0x45, 0x0000,
+ -1, 0x46, 0x013F,
+ -1, 0x30, 0x0707,
+ -1, 0x31, 0x0204,
+ -1, 0x32, 0x0204,
+ -1, 0x33, 0x0502,
+ -1, 0x34, 0x0507,
+ -1, 0x35, 0x0204,
+ -1, 0x36, 0x0204,
+ -1, 0x37, 0x0502,
+ -1, 0x3A, 0x0302,
+ -1, 0x3B, 0x0302,
+ -1, 0x23, 0x0000,
+ -1, 0x24, 0x0000,
+ -1, 0x25, 0x8000,
+ -1, 0x4f, 0x0000,
+ -1, 0x4e, 0x0000,
+ -1, 0x22,
+ -3
+};
+
+static int hx8340bn_init[] = {
+ -1, 0xC1, 0xFF, 0x83, 0x40,
+ -1, 0x11,
+ -2, 150,
+ -1, 0xCA, 0x70, 0x00, 0xD9,
+ -1, 0xB0, 0x01, 0x11,
+ -1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06,
+ -2, 20,
+ -1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A,
+ -1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33,
+ -2, 10,
+ -1, 0xB5, 0x35, 0x20, 0x45,
+ -1, 0xB4, 0x33, 0x25, 0x4C, -2, 10,
+ -1, 0x3A, 0x05,
+ -1, 0x29,
+ -2, 10,
+ -3
+};
+
+static int ili9225_init[] = {
+ -1, 0x0001, 0x011C,
+ -1, 0x0002, 0x0100,
+ -1, 0x0003, 0x1030,
+ -1, 0x0008, 0x0808,
+ -1, 0x000C, 0x0000,
+ -1, 0x000F, 0x0A01,
+ -1, 0x0020, 0x0000,
+ -1, 0x0021, 0x0000,
+ -2, 50,
+ -1, 0x0010, 0x0A00,
+ -1, 0x0011, 0x1038,
+ -2, 50,
+ -1, 0x0012, 0x1121,
+ -1, 0x0013, 0x004E,
+ -1, 0x0014, 0x676F,
+ -1, 0x0030, 0x0000,
+ -1, 0x0031, 0x00DB,
+ -1, 0x0032, 0x0000,
+ -1, 0x0033, 0x0000,
+ -1, 0x0034, 0x00DB,
+ -1, 0x0035, 0x0000,
+ -1, 0x0036, 0x00AF,
+ -1, 0x0037, 0x0000,
+ -1, 0x0038, 0x00DB,
+ -1, 0x0039, 0x0000,
+ -1, 0x0050, 0x0000,
+ -1, 0x0051, 0x060A,
+ -1, 0x0052, 0x0D0A,
+ -1, 0x0053, 0x0303,
+ -1, 0x0054, 0x0A0D,
+ -1, 0x0055, 0x0A06,
+ -1, 0x0056, 0x0000,
+ -1, 0x0057, 0x0303,
+ -1, 0x0058, 0x0000,
+ -1, 0x0059, 0x0000,
+ -2, 50,
+ -1, 0x0007, 0x1017,
+ -2, 50,
+ -3
+};
+
+static int ili9320_init[] = {
+ -1, 0x00E5, 0x8000,
+ -1, 0x0000, 0x0001,
+ -1, 0x0001, 0x0100,
+ -1, 0x0002, 0x0700,
+ -1, 0x0003, 0x1030,
+ -1, 0x0004, 0x0000,
+ -1, 0x0008, 0x0202,
+ -1, 0x0009, 0x0000,
+ -1, 0x000A, 0x0000,
+ -1, 0x000C, 0x0000,
+ -1, 0x000D, 0x0000,
+ -1, 0x000F, 0x0000,
+ -1, 0x0010, 0x0000,
+ -1, 0x0011, 0x0007,
+ -1, 0x0012, 0x0000,
+ -1, 0x0013, 0x0000,
+ -2, 200,
+ -1, 0x0010, 0x17B0,
+ -1, 0x0011, 0x0031,
+ -2, 50,
+ -1, 0x0012, 0x0138,
+ -2, 50,
+ -1, 0x0013, 0x1800,
+ -1, 0x0029, 0x0008,
+ -2, 50,
+ -1, 0x0020, 0x0000,
+ -1, 0x0021, 0x0000,
+ -1, 0x0030, 0x0000,
+ -1, 0x0031, 0x0505,
+ -1, 0x0032, 0x0004,
+ -1, 0x0035, 0x0006,
+ -1, 0x0036, 0x0707,
+ -1, 0x0037, 0x0105,
+ -1, 0x0038, 0x0002,
+ -1, 0x0039, 0x0707,
+ -1, 0x003C, 0x0704,
+ -1, 0x003D, 0x0807,
+ -1, 0x0050, 0x0000,
+ -1, 0x0051, 0x00EF,
+ -1, 0x0052, 0x0000,
+ -1, 0x0053, 0x013F,
+ -1, 0x0060, 0x2700,
+ -1, 0x0061, 0x0001,
+ -1, 0x006A, 0x0000,
+ -1, 0x0080, 0x0000,
+ -1, 0x0081, 0x0000,
+ -1, 0x0082, 0x0000,
+ -1, 0x0083, 0x0000,
+ -1, 0x0084, 0x0000,
+ -1, 0x0085, 0x0000,
+ -1, 0x0090, 0x0010,
+ -1, 0x0092, 0x0000,
+ -1, 0x0093, 0x0003,
+ -1, 0x0095, 0x0110,
+ -1, 0x0097, 0x0000,
+ -1, 0x0098, 0x0000,
+ -1, 0x0007, 0x0173,
+ -3
+};
+
+static int ili9325_init[] = {
+ -1, 0x00E3, 0x3008,
+ -1, 0x00E7, 0x0012,
+ -1, 0x00EF, 0x1231,
+ -1, 0x0001, 0x0100,
+ -1, 0x0002, 0x0700,
+ -1, 0x0003, 0x1030,
+ -1, 0x0004, 0x0000,
+ -1, 0x0008, 0x0207,
+ -1, 0x0009, 0x0000,
+ -1, 0x000A, 0x0000,
+ -1, 0x000C, 0x0000,
+ -1, 0x000D, 0x0000,
+ -1, 0x000F, 0x0000,
+ -1, 0x0010, 0x0000,
+ -1, 0x0011, 0x0007,
+ -1, 0x0012, 0x0000,
+ -1, 0x0013, 0x0000,
+ -2, 200,
+ -1, 0x0010, 0x1690,
+ -1, 0x0011, 0x0223,
+ -2, 50,
+ -1, 0x0012, 0x000D,
+ -2, 50,
+ -1, 0x0013, 0x1200,
+ -1, 0x0029, 0x000A,
+ -1, 0x002B, 0x000C,
+ -2, 50,
+ -1, 0x0020, 0x0000,
+ -1, 0x0021, 0x0000,
+ -1, 0x0030, 0x0000,
+ -1, 0x0031, 0x0506,
+ -1, 0x0032, 0x0104,
+ -1, 0x0035, 0x0207,
+ -1, 0x0036, 0x000F,
+ -1, 0x0037, 0x0306,
+ -1, 0x0038, 0x0102,
+ -1, 0x0039, 0x0707,
+ -1, 0x003C, 0x0702,
+ -1, 0x003D, 0x1604,
+ -1, 0x0050, 0x0000,
+ -1, 0x0051, 0x00EF,
+ -1, 0x0052, 0x0000,
+ -1, 0x0053, 0x013F,
+ -1, 0x0060, 0xA700,
+ -1, 0x0061, 0x0001,
+ -1, 0x006A, 0x0000,
+ -1, 0x0080, 0x0000,
+ -1, 0x0081, 0x0000,
+ -1, 0x0082, 0x0000,
+ -1, 0x0083, 0x0000,
+ -1, 0x0084, 0x0000,
+ -1, 0x0085, 0x0000,
+ -1, 0x0090, 0x0010,
+ -1, 0x0092, 0x0600,
+ -1, 0x0007, 0x0133,
+ -3
+};
+
+static int ili9341_init[] = {
+ -1, 0x28,
+ -2, 20,
+ -1, 0xCF, 0x00, 0x83, 0x30,
+ -1, 0xED, 0x64, 0x03, 0x12, 0x81,
+ -1, 0xE8, 0x85, 0x01, 0x79,
+ -1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02,
+ -1, 0xF7, 0x20, -1, 0xEA, 0x00, 0x00,
+ -1, 0xC0, 0x26,
+ -1, 0xC1, 0x11,
+ -1, 0xC5, 0x35, 0x3E,
+ -1, 0xC7, 0xBE,
+ -1, 0xB1, 0x00, 0x1B,
+ -1, 0xB6, 0x0a, 0x82, 0x27, 0x00,
+ -1, 0xB7, 0x07,
+ -1, 0x3A, 0x55,
+ -1, 0x36, 0x48,
+ -1, 0x11,
+ -2, 120,
+ -1, 0x29,
+ -2, 20,
+ -3
+};
+
+static int ssd1351_init[] = {
+ -1, 0xfd, 0x12,
+ -1, 0xfd, 0xb1,
+ -1, 0xae,
+ -1, 0xb3, 0xf1,
+ -1, 0xca, 0x7f,
+ -1, 0xa0, 0x74,
+ -1, 0x15, 0x00, 0x7f,
+ -1, 0x75, 0x00, 0x7f,
+ -1, 0xa1, 0x00,
+ -1, 0xa2, 0x00,
+ -1, 0xb5, 0x00,
+ -1, 0xab, 0x01,
+ -1, 0xb1, 0x32,
+ -1, 0xb4, 0xa0, 0xb5, 0x55,
+ -1, 0xbb, 0x17,
+ -1, 0xbe, 0x05,
+ -1, 0xc1, 0xc8, 0x80, 0xc8,
+ -1, 0xc7, 0x0f,
+ -1, 0xb6, 0x01,
+ -1, 0xa6,
+ -1, 0xaf,
+ -3
+};
/* ili9320, ili9325 */
@@ -232,8 +476,8 @@ static int flexfb_verify_gpios_db(struct fbtft_par *par)
return -EINVAL;
}
if (latched)
- num_db=buswidth/2;
- for (i=0;i < num_db;i++) {
+ num_db = buswidth/2;
+ for (i = 0; i < num_db; i++) {
if (par->gpio.db[i] < 0) {
dev_err(par->info->device, "Missing info about 'db%02d' gpio. Aborting.\n", i);
return -EINVAL;
@@ -423,7 +667,7 @@ static int flexfb_probe_common(struct spi_device *sdev, struct platform_device *
}
par->fbtftops.write_register = fbtft_write_reg8_bus9;
par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- sdev->bits_per_word=9;
+ sdev->bits_per_word = 9;
ret = sdev->master->setup(sdev);
if (ret) {
dev_warn(dev,
--
2.3.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] Staging: fbtft: fix space errors
@ 2015-02-23 16:24 Matteo Semenzato
2015-03-02 1:16 ` Greg KH
0 siblings, 1 reply; 10+ messages in thread
From: Matteo Semenzato @ 2015-02-23 16:24 UTC (permalink / raw)
To: thomas.petazzoni, noralf, gregkh; +Cc: devel, linux-kernel, Matteo Semenzato
From: Matteo Semenzato <mattew8898@gmail.com>
This patch fixes the following error:
space prohibited before that ','
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
---
drivers/staging/fbtft/fb_ra8875.c | 150 +++++++++++++++++++-------------------
1 file changed, 75 insertions(+), 75 deletions(-)
diff --git a/drivers/staging/fbtft/fb_ra8875.c b/drivers/staging/fbtft/fb_ra8875.c
index c323c06..8df9737 100644
--- a/drivers/staging/fbtft/fb_ra8875.c
+++ b/drivers/staging/fbtft/fb_ra8875.c
@@ -79,112 +79,112 @@ static int init_display(struct fbtft_par *par)
if ((par->info->var.xres == 320) && (par->info->var.yres == 240)) {
/* PLL clock frequency */
- write_reg(par, 0x88 , 0x0A);
- write_reg(par, 0x89 , 0x02);
+ write_reg(par, 0x88, 0x0A);
+ write_reg(par, 0x89, 0x02);
mdelay(10);
/* color deep / MCU Interface */
- write_reg(par, 0x10 , 0x0C);
+ write_reg(par, 0x10, 0x0C);
/* pixel clock period */
- write_reg(par, 0x04 , 0x03);
+ write_reg(par, 0x04, 0x03);
mdelay(1);
/* horizontal settings */
- write_reg(par, 0x14 , 0x27);
- write_reg(par, 0x15 , 0x00);
- write_reg(par, 0x16 , 0x05);
- write_reg(par, 0x17 , 0x04);
- write_reg(par, 0x18 , 0x03);
+ write_reg(par, 0x14, 0x27);
+ write_reg(par, 0x15, 0x00);
+ write_reg(par, 0x16, 0x05);
+ write_reg(par, 0x17, 0x04);
+ write_reg(par, 0x18, 0x03);
/* vertical settings */
- write_reg(par, 0x19 , 0xEF);
- write_reg(par, 0x1A , 0x00);
- write_reg(par, 0x1B , 0x05);
- write_reg(par, 0x1C , 0x00);
- write_reg(par, 0x1D , 0x0E);
- write_reg(par, 0x1E , 0x00);
- write_reg(par, 0x1F , 0x02);
+ write_reg(par, 0x19, 0xEF);
+ write_reg(par, 0x1A, 0x00);
+ write_reg(par, 0x1B, 0x05);
+ write_reg(par, 0x1C, 0x00);
+ write_reg(par, 0x1D, 0x0E);
+ write_reg(par, 0x1E, 0x00);
+ write_reg(par, 0x1F, 0x02);
} else if ((par->info->var.xres == 480) && (par->info->var.yres == 272)) {
/* PLL clock frequency */
- write_reg(par, 0x88 , 0x0A);
- write_reg(par, 0x89 , 0x02);
+ write_reg(par, 0x88, 0x0A);
+ write_reg(par, 0x89, 0x02);
mdelay(10);
/* color deep / MCU Interface */
- write_reg(par, 0x10 , 0x0C);
+ write_reg(par, 0x10, 0x0C);
/* pixel clock period */
- write_reg(par, 0x04 , 0x82);
+ write_reg(par, 0x04, 0x82);
mdelay(1);
/* horizontal settings */
- write_reg(par, 0x14 , 0x3B);
- write_reg(par, 0x15 , 0x00);
- write_reg(par, 0x16 , 0x01);
- write_reg(par, 0x17 , 0x00);
- write_reg(par, 0x18 , 0x05);
+ write_reg(par, 0x14, 0x3B);
+ write_reg(par, 0x15, 0x00);
+ write_reg(par, 0x16, 0x01);
+ write_reg(par, 0x17, 0x00);
+ write_reg(par, 0x18, 0x05);
/* vertical settings */
- write_reg(par, 0x19 , 0x0F);
- write_reg(par, 0x1A , 0x01);
- write_reg(par, 0x1B , 0x02);
- write_reg(par, 0x1C , 0x00);
- write_reg(par, 0x1D , 0x07);
- write_reg(par, 0x1E , 0x00);
- write_reg(par, 0x1F , 0x09);
+ write_reg(par, 0x19, 0x0F);
+ write_reg(par, 0x1A, 0x01);
+ write_reg(par, 0x1B, 0x02);
+ write_reg(par, 0x1C, 0x00);
+ write_reg(par, 0x1D, 0x07);
+ write_reg(par, 0x1E, 0x00);
+ write_reg(par, 0x1F, 0x09);
} else if ((par->info->var.xres == 640) && (par->info->var.yres == 480)) {
/* PLL clock frequency */
- write_reg(par, 0x88 , 0x0B);
- write_reg(par, 0x89 , 0x02);
+ write_reg(par, 0x88, 0x0B);
+ write_reg(par, 0x89, 0x02);
mdelay(10);
/* color deep / MCU Interface */
- write_reg(par, 0x10 , 0x0C);
+ write_reg(par, 0x10, 0x0C);
/* pixel clock period */
- write_reg(par, 0x04 , 0x01);
+ write_reg(par, 0x04, 0x01);
mdelay(1);
/* horizontal settings */
- write_reg(par, 0x14 , 0x4F);
- write_reg(par, 0x15 , 0x05);
- write_reg(par, 0x16 , 0x0F);
- write_reg(par, 0x17 , 0x01);
- write_reg(par, 0x18 , 0x00);
+ write_reg(par, 0x14, 0x4F);
+ write_reg(par, 0x15, 0x05);
+ write_reg(par, 0x16, 0x0F);
+ write_reg(par, 0x17, 0x01);
+ write_reg(par, 0x18, 0x00);
/* vertical settings */
- write_reg(par, 0x19 , 0xDF);
- write_reg(par, 0x1A , 0x01);
- write_reg(par, 0x1B , 0x0A);
- write_reg(par, 0x1C , 0x00);
- write_reg(par, 0x1D , 0x0E);
- write_reg(par, 0x1E , 0x00);
- write_reg(par, 0x1F , 0x01);
+ write_reg(par, 0x19, 0xDF);
+ write_reg(par, 0x1A, 0x01);
+ write_reg(par, 0x1B, 0x0A);
+ write_reg(par, 0x1C, 0x00);
+ write_reg(par, 0x1D, 0x0E);
+ write_reg(par, 0x1E, 0x00);
+ write_reg(par, 0x1F, 0x01);
} else if ((par->info->var.xres == 800) && (par->info->var.yres == 480)) {
/* PLL clock frequency */
- write_reg(par, 0x88 , 0x0B);
- write_reg(par, 0x89 , 0x02);
+ write_reg(par, 0x88, 0x0B);
+ write_reg(par, 0x89, 0x02);
mdelay(10);
/* color deep / MCU Interface */
- write_reg(par, 0x10 , 0x0C);
+ write_reg(par, 0x10, 0x0C);
/* pixel clock period */
- write_reg(par, 0x04 , 0x81);
+ write_reg(par, 0x04, 0x81);
mdelay(1);
/* horizontal settings */
- write_reg(par, 0x14 , 0x63);
- write_reg(par, 0x15 , 0x03);
- write_reg(par, 0x16 , 0x03);
- write_reg(par, 0x17 , 0x02);
- write_reg(par, 0x18 , 0x00);
+ write_reg(par, 0x14, 0x63);
+ write_reg(par, 0x15, 0x03);
+ write_reg(par, 0x16, 0x03);
+ write_reg(par, 0x17, 0x02);
+ write_reg(par, 0x18, 0x00);
/* vertical settings */
- write_reg(par, 0x19 , 0xDF);
- write_reg(par, 0x1A , 0x01);
- write_reg(par, 0x1B , 0x14);
- write_reg(par, 0x1C , 0x00);
- write_reg(par, 0x1D , 0x06);
- write_reg(par, 0x1E , 0x00);
- write_reg(par, 0x1F , 0x01);
+ write_reg(par, 0x19, 0xDF);
+ write_reg(par, 0x1A, 0x01);
+ write_reg(par, 0x1B, 0x14);
+ write_reg(par, 0x1C, 0x00);
+ write_reg(par, 0x1D, 0x06);
+ write_reg(par, 0x1E, 0x00);
+ write_reg(par, 0x1F, 0x01);
} else {
dev_err(par->info->device, "display size is not supported!!");
return -1;
}
/* PWM clock */
- write_reg(par, 0x8a , 0x81);
- write_reg(par, 0x8b , 0xFF);
+ write_reg(par, 0x8a, 0x81);
+ write_reg(par, 0x8b, 0xFF);
mdelay(10);
/* Display ON */
- write_reg(par, 0x01 , 0x80);
+ write_reg(par, 0x01, 0x80);
mdelay(10);
return 0;
@@ -196,14 +196,14 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);
/* Set_Active_Window */
- write_reg(par, 0x30 , xs & 0x00FF);
- write_reg(par, 0x31 , (xs & 0xFF00) >> 8);
- write_reg(par, 0x32 , ys & 0x00FF);
- write_reg(par, 0x33 , (ys & 0xFF00) >> 8);
- write_reg(par, 0x34 , (xs+xe) & 0x00FF);
- write_reg(par, 0x35 , ((xs+xe) & 0xFF00) >> 8);
- write_reg(par, 0x36 , (ys+ye) & 0x00FF);
- write_reg(par, 0x37 , ((ys+ye) & 0xFF00) >> 8);
+ write_reg(par, 0x30, xs & 0x00FF);
+ write_reg(par, 0x31, (xs & 0xFF00) >> 8);
+ write_reg(par, 0x32, ys & 0x00FF);
+ write_reg(par, 0x33, (ys & 0xFF00) >> 8);
+ write_reg(par, 0x34, (xs+xe) & 0x00FF);
+ write_reg(par, 0x35, ((xs+xe) & 0xFF00) >> 8);
+ write_reg(par, 0x36, (ys+ye) & 0x00FF);
+ write_reg(par, 0x37, ((ys+ye) & 0xFF00) >> 8);
/* Set_Memory_Write_Cursor */
write_reg(par, 0x46, xs & 0xff);
--
2.3.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH] Staging: fbtft: fix space errors
2015-02-23 16:24 [PATCH] " Matteo Semenzato
@ 2015-03-02 1:16 ` Greg KH
0 siblings, 0 replies; 10+ messages in thread
From: Greg KH @ 2015-03-02 1:16 UTC (permalink / raw)
To: Matteo Semenzato; +Cc: thomas.petazzoni, noralf, devel, linux-kernel
On Mon, Feb 23, 2015 at 05:24:51PM +0100, Matteo Semenzato wrote:
> From: Matteo Semenzato <mattew8898@gmail.com>
>
> This patch fixes the following error:
> space prohibited before that ','
>
> Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
> ---
> drivers/staging/fbtft/fb_ra8875.c | 150 +++++++++++++++++++-------------------
> 1 file changed, 75 insertions(+), 75 deletions(-)
Also doesn't apply :(
Please fix up all of your pending patches for this driver and resend,
something is really out of sync here...
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] Staging: fbtft: fix space errors
@ 2015-02-22 8:50 Matteo Semenzato
0 siblings, 0 replies; 10+ messages in thread
From: Matteo Semenzato @ 2015-02-22 8:50 UTC (permalink / raw)
To: thomas.petazzoni, noralf, gregkh; +Cc: devel, linux-kernel, Matteo Semenzato
From: Matteo Semenzato <mattew8898@gmail.com>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
---
drivers/staging/fbtft/fb_upd161704.c | 90 ++++++++++++++++++------------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c
index fff57b3..176c210 100644
--- a/drivers/staging/fbtft/fb_upd161704.c
+++ b/drivers/staging/fbtft/fb_upd161704.c
@@ -47,84 +47,84 @@ static int init_display(struct fbtft_par *par)
/* Initialization sequence from Lib_UTFT */
/* register reset */
- write_reg(par, 0x0003,0x0001); /* Soft reset */
+ write_reg(par, 0x0003, 0x0001); /* Soft reset */
/* oscillator start */
- write_reg(par, 0x003A,0x0001); /*Oscillator 0: stop, 1: operation */
+ write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */
udelay(100);
/* y-setting */
- write_reg(par, 0x0024,0x007B); /* amplitude setting */
+ write_reg(par, 0x0024, 0x007B); /* amplitude setting */
udelay(10);
- write_reg(par, 0x0025,0x003B); /* amplitude setting */
- write_reg(par, 0x0026,0x0034); /* amplitude setting */
+ write_reg(par, 0x0025, 0x003B); /* amplitude setting */
+ write_reg(par, 0x0026, 0x0034); /* amplitude setting */
udelay(10);
- write_reg(par, 0x0027,0x0004); /* amplitude setting */
- write_reg(par, 0x0052,0x0025); /* circuit setting 1 */
+ write_reg(par, 0x0027, 0x0004); /* amplitude setting */
+ write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */
udelay(10);
- write_reg(par, 0x0053,0x0033); /* circuit setting 2 */
- write_reg(par, 0x0061,0x001C); /* adjustment V10 positive polarity */
+ write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */
+ write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */
udelay(10);
- write_reg(par, 0x0062,0x002C); /* adjustment V9 negative polarity */
- write_reg(par, 0x0063,0x0022); /* adjustment V34 positive polarity */
+ write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */
+ write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */
udelay(10);
- write_reg(par, 0x0064,0x0027); /* adjustment V31 negative polarity */
+ write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */
udelay(10);
- write_reg(par, 0x0065,0x0014); /* adjustment V61 negative polarity */
+ write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */
udelay(10);
- write_reg(par, 0x0066,0x0010); /* adjustment V61 negative polarity */
-
+ write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */
+
/* Basical clock for 1 line (BASECOUNT[7:0]) number specified */
- write_reg(par, 0x002E,0x002D);
-
+ write_reg(par, 0x002E, 0x002D);
+
/* Power supply setting */
- write_reg(par, 0x0019,0x0000); /* DC/DC output setting */
+ write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */
udelay(200);
- write_reg(par, 0x001A,0x1000); /* DC/DC frequency setting */
- write_reg(par, 0x001B,0x0023); /* DC/DC rising setting */
- write_reg(par, 0x001C,0x0C01); /* Regulator voltage setting */
- write_reg(par, 0x001D,0x0000); /* Regulator current setting */
- write_reg(par, 0x001E,0x0009); /* VCOM output setting */
- write_reg(par, 0x001F,0x0035); /* VCOM amplitude setting */
- write_reg(par, 0x0020,0x0015); /* VCOMM cencter setting */
- write_reg(par, 0x0018,0x1E7B); /* DC/DC operation setting */
+ write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */
+ write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */
+ write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */
+ write_reg(par, 0x001D, 0x0000); /* Regulator current setting */
+ write_reg(par, 0x001E, 0x0009); /* VCOM output setting */
+ write_reg(par, 0x001F, 0x0035); /* VCOM amplitude setting */
+ write_reg(par, 0x0020, 0x0015); /* VCOMM cencter setting */
+ write_reg(par, 0x0018, 0x1E7B); /* DC/DC operation setting */
/* windows setting */
- write_reg(par, 0x0008,0x0000); /* Minimum X address */
- write_reg(par, 0x0009,0x00EF); /* Maximum X address */
- write_reg(par, 0x000a,0x0000); /* Minimum Y address */
- write_reg(par, 0x000b,0x013F); /* Maximum Y address */
+ write_reg(par, 0x0008, 0x0000); /* Minimum X address */
+ write_reg(par, 0x0009, 0x00EF); /* Maximum X address */
+ write_reg(par, 0x000a, 0x0000); /* Minimum Y address */
+ write_reg(par, 0x000b, 0x013F); /* Maximum Y address */
/* LCD display area setting */
- write_reg(par, 0x0029,0x0000); /* [LCDSIZE] X MIN. size set */
- write_reg(par, 0x002A,0x0000); /* [LCDSIZE] Y MIN. size set */
- write_reg(par, 0x002B,0x00EF); /* [LCDSIZE] X MAX. size set */
- write_reg(par, 0x002C,0x013F); /* [LCDSIZE] Y MAX. size set */
+ write_reg(par, 0x0029, 0x0000); /* [LCDSIZE] X MIN. size set */
+ write_reg(par, 0x002A, 0x0000); /* [LCDSIZE] Y MIN. size set */
+ write_reg(par, 0x002B, 0x00EF); /* [LCDSIZE] X MAX. size set */
+ write_reg(par, 0x002C, 0x013F); /* [LCDSIZE] Y MAX. size set */
/* Gate scan setting */
- write_reg(par, 0x0032,0x0002);
-
+ write_reg(par, 0x0032, 0x0002);
+
/* n line inversion line number */
- write_reg(par, 0x0033,0x0000);
+ write_reg(par, 0x0033, 0x0000);
/* Line inversion/frame inversion/interlace setting */
- write_reg(par, 0x0037,0x0000);
-
+ write_reg(par, 0x0037, 0x0000);
+
/* Gate scan operation setting register */
- write_reg(par, 0x003B,0x0001);
-
+ write_reg(par, 0x003B, 0x0001);
+
/* Color mode */
/*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */
- write_reg(par, 0x0004,0x0000);
+ write_reg(par, 0x0004, 0x0000);
/* RAM control register */
- write_reg(par, 0x0005,0x0000); /*Window access 00:Normal, 10:Window */
+ write_reg(par, 0x0005, 0x0000); /*Window access 00:Normal, 10:Window */
/* Display setting register 2 */
- write_reg(par, 0x0001,0x0000);
+ write_reg(par, 0x0001, 0x0000);
/* display setting */
- write_reg(par, 0x0000,0x0000); /* display on */
+ write_reg(par, 0x0000, 0x0000); /* display on */
return 0;
}
--
2.3.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-03-02 19:39 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-28 14:44 [PATCH] Staging: fbtft: fix space errors Matteo Semenzato
2015-02-28 14:59 ` Joe Perches
2015-03-02 9:37 ` Dan Carpenter
2015-03-02 14:20 ` Joe Perches
2015-03-02 19:21 ` Andrey Skvortsov
2015-03-02 19:39 ` Noralf Trønnes
2015-02-28 16:04 ` [PATCH V2] " Matteo Semenzato
-- strict thread matches above, loose matches on Subject: below --
2015-02-23 16:24 [PATCH] " Matteo Semenzato
2015-03-02 1:16 ` Greg KH
2015-02-22 8:50 Matteo Semenzato
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox