From: Lee Jones <lee.jones@linaro.org>
To: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 16/27] mfd: ab8500-debugfs: Remove use of seq_printf return value
Date: Fri, 6 Mar 2015 10:54:32 +0000 [thread overview]
Message-ID: <20150306105432.GB3318@x1> (raw)
In-Reply-To: <077b4778e5b1267b8e41b0ec764050f2092e476d.1424573328.git.joe@perches.com>
On Sat, 21 Feb 2015, Joe Perches wrote:
> The seq_printf return value, because it's frequently misused,
> will eventually be converted to void.
>
> See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
> seq_has_overflowed() and make public")
I'm not a fan of mixing functional patches with clean-ups, but I'm in
a particually good mood today (it must be Firday).
Applied, thanks.
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/mfd/ab8500-debugfs.c | 196 ++++++++++++++++++++++++++-----------------
> 1 file changed, 121 insertions(+), 75 deletions(-)
>
> diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
> index 9a8e185..cdd6f3d 100644
> --- a/drivers/mfd/ab8500-debugfs.c
> +++ b/drivers/mfd/ab8500-debugfs.c
> @@ -1283,7 +1283,7 @@ static irqreturn_t ab8500_debug_handler(int irq, void *data)
>
> /* Prints to seq_file or log_buf */
> static int ab8500_registers_print(struct device *dev, u32 bank,
> - struct seq_file *s)
> + struct seq_file *s)
> {
> unsigned int i;
>
> @@ -1304,20 +1304,19 @@ static int ab8500_registers_print(struct device *dev, u32 bank,
> }
>
> if (s) {
> - err = seq_printf(s,
> - " [0x%02X/0x%02X]: 0x%02X\n",
> - bank, reg, value);
> - if (err < 0) {
> - /* Error is not returned here since
> - * the output is wanted in any case */
> + seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n",
> + bank, reg, value);
> + /* Error is not returned here since
> + * the output is wanted in any case */
> + if (seq_has_overflowed(s))
> return 0;
> - }
> } else {
> dev_info(dev, " [0x%02X/0x%02X]: 0x%02X\n",
> bank, reg, value);
> }
> }
> }
> +
> return 0;
> }
>
> @@ -1330,8 +1329,7 @@ static int ab8500_print_bank_registers(struct seq_file *s, void *p)
>
> seq_printf(s, " bank 0x%02X:\n", bank);
>
> - ab8500_registers_print(dev, bank, s);
> - return 0;
> + return ab8500_registers_print(dev, bank, s);
> }
>
> static int ab8500_registers_open(struct inode *inode, struct file *file)
> @@ -1355,9 +1353,12 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p)
> seq_puts(s, AB8500_NAME_STRING " register values:\n");
>
> for (i = 0; i < AB8500_NUM_BANKS; i++) {
> - seq_printf(s, " bank 0x%02X:\n", i);
> + int err;
>
> - ab8500_registers_print(dev, i, s);
> + seq_printf(s, " bank 0x%02X:\n", i);
> + err = ab8500_registers_print(dev, i, s);
> + if (err)
> + return err;
> }
> return 0;
> }
> @@ -1458,7 +1459,8 @@ static const struct file_operations ab8500_all_banks_fops = {
>
> static int ab8500_bank_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "0x%02X\n", debug_bank);
> + seq_printf(s, "0x%02X\n", debug_bank);
> + return 0;
> }
>
> static int ab8500_bank_open(struct inode *inode, struct file *file)
> @@ -1490,7 +1492,8 @@ static ssize_t ab8500_bank_write(struct file *file,
>
> static int ab8500_address_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "0x%02X\n", debug_address);
> + seq_printf(s, "0x%02X\n", debug_address);
> + return 0;
> }
>
> static int ab8500_address_open(struct inode *inode, struct file *file)
> @@ -1598,7 +1601,8 @@ static int ab8500_interrupts_print(struct seq_file *s, void *p)
> for (line = 0; line < num_interrupt_lines; line++) {
> struct irq_desc *desc = irq_to_desc(line + irq_first);
>
> - seq_printf(s, "%3i: %6i %4i", line,
> + seq_printf(s, "%3i: %6i %4i",
> + line,
> num_interrupts[line],
> num_wake_interrupts[line]);
>
> @@ -1705,8 +1709,7 @@ static int ab8500_print_modem_registers(struct seq_file *s, void *p)
> dev_err(dev, "ab->read fail %d\n", err);
> return err;
> }
> - err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n",
> - bank, reg, value);
> + seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", bank, reg, value);
> }
> err = abx500_set_register_interruptible(dev,
> AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value);
> @@ -1743,8 +1746,9 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
> bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> BAT_CTRL, bat_ctrl_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - bat_ctrl_convert, bat_ctrl_raw);
> + seq_printf(s, "%d,0x%X\n", bat_ctrl_convert, bat_ctrl_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file)
> @@ -1773,8 +1777,9 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p)
> btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
> btemp_ball_raw);
>
> - return seq_printf(s,
> - "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
> + seq_printf(s, "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_btemp_ball_open(struct inode *inode,
> @@ -1804,8 +1809,9 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p)
> main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> MAIN_CHARGER_V, main_charger_v_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - main_charger_v_convert, main_charger_v_raw);
> + seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_main_charger_v_open(struct inode *inode,
> @@ -1835,8 +1841,9 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p)
> acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
> acc_detect1_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - acc_detect1_convert, acc_detect1_raw);
> + seq_printf(s, "%d,0x%X\n", acc_detect1_convert, acc_detect1_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_acc_detect1_open(struct inode *inode,
> @@ -1866,8 +1873,9 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p)
> acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> ACC_DETECT2, acc_detect2_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - acc_detect2_convert, acc_detect2_raw);
> + seq_printf(s, "%d,0x%X\n", acc_detect2_convert, acc_detect2_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_acc_detect2_open(struct inode *inode,
> @@ -1897,8 +1905,9 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p)
> aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
> aux1_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - aux1_convert, aux1_raw);
> + seq_printf(s, "%d,0x%X\n", aux1_convert, aux1_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file)
> @@ -1926,8 +1935,9 @@ static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p)
> aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
> aux2_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - aux2_convert, aux2_raw);
> + seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_aux2_open(struct inode *inode, struct file *file)
> @@ -1955,8 +1965,9 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p)
> main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
> main_bat_v_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - main_bat_v_convert, main_bat_v_raw);
> + seq_printf(s, "%d,0x%X\n", main_bat_v_convert, main_bat_v_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_main_bat_v_open(struct inode *inode,
> @@ -1986,8 +1997,9 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p)
> vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
> vbus_v_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - vbus_v_convert, vbus_v_raw);
> + seq_printf(s, "%d,0x%X\n", vbus_v_convert, vbus_v_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file)
> @@ -2015,8 +2027,9 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p)
> main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> MAIN_CHARGER_C, main_charger_c_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - main_charger_c_convert, main_charger_c_raw);
> + seq_printf(s, "%d,0x%X\n", main_charger_c_convert, main_charger_c_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_main_charger_c_open(struct inode *inode,
> @@ -2046,8 +2059,9 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p)
> usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> USB_CHARGER_C, usb_charger_c_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - usb_charger_c_convert, usb_charger_c_raw);
> + seq_printf(s, "%d,0x%X\n", usb_charger_c_convert, usb_charger_c_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_usb_charger_c_open(struct inode *inode,
> @@ -2077,8 +2091,9 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p)
> bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
> BK_BAT_V, bk_bat_v_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - bk_bat_v_convert, bk_bat_v_raw);
> + seq_printf(s, "%d,0x%X\n", bk_bat_v_convert, bk_bat_v_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file)
> @@ -2107,8 +2122,9 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p)
> die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
> die_temp_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - die_temp_convert, die_temp_raw);
> + seq_printf(s, "%d,0x%X\n", die_temp_convert, die_temp_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file)
> @@ -2137,8 +2153,9 @@ static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p)
> usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
> usb_id_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - usb_id_convert, usb_id_raw);
> + seq_printf(s, "%d,0x%X\n", usb_id_convert, usb_id_raw);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file)
> @@ -2166,8 +2183,9 @@ static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p)
> xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
> xtal_temp_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - xtal_temp_convert, xtal_temp_raw);
> + seq_printf(s, "%d,0x%X\n", xtal_temp_convert, xtal_temp_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file)
> @@ -2197,8 +2215,9 @@ static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p)
> ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
> vbat_true_meas_raw);
>
> - return seq_printf(s, "%d,0x%X\n",
> - vbat_true_meas_convert, vbat_true_meas_raw);
> + seq_printf(s, "%d,0x%X\n", vbat_true_meas_convert, vbat_true_meas_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode,
> @@ -2233,9 +2252,13 @@ static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p)
> ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
> ibat_raw);
>
> - return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
> - bat_ctrl_convert, bat_ctrl_raw,
> - ibat_convert, ibat_raw);
> + seq_printf(s,
> + "%d,0x%X\n"
> + "%d,0x%X\n",
> + bat_ctrl_convert, bat_ctrl_raw,
> + ibat_convert, ibat_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode,
> @@ -2269,9 +2292,13 @@ static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p)
> ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
> ibat_raw);
>
> - return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
> - vbat_meas_convert, vbat_meas_raw,
> - ibat_convert, ibat_raw);
> + seq_printf(s,
> + "%d,0x%X\n"
> + "%d,0x%X\n",
> + vbat_meas_convert, vbat_meas_raw,
> + ibat_convert, ibat_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode,
> @@ -2307,9 +2334,13 @@ static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s,
> ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
> ibat_raw);
>
> - return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
> - vbat_true_meas_convert, vbat_true_meas_raw,
> - ibat_convert, ibat_raw);
> + seq_printf(s,
> + "%d,0x%X\n"
> + "%d,0x%X\n",
> + vbat_true_meas_convert, vbat_true_meas_raw,
> + ibat_convert, ibat_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode,
> @@ -2344,9 +2375,13 @@ static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p)
> ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
> ibat_raw);
>
> - return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n",
> - bat_temp_convert, bat_temp_raw,
> - ibat_convert, ibat_raw);
> + seq_printf(s,
> + "%d,0x%X\n"
> + "%d,0x%X\n",
> + bat_temp_convert, bat_temp_raw,
> + ibat_convert, ibat_raw);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode,
> @@ -2373,16 +2408,19 @@ static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p)
> gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
> ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
> &vbat_l, &vbat_h, &ibat_l, &ibat_h);
> - return seq_printf(s, "VMAIN_L:0x%X\n"
> - "VMAIN_H:0x%X\n"
> - "BTEMP_L:0x%X\n"
> - "BTEMP_H:0x%X\n"
> - "VBAT_L:0x%X\n"
> - "VBAT_H:0x%X\n"
> - "IBAT_L:0x%X\n"
> - "IBAT_H:0x%X\n",
> - vmain_l, vmain_h, btemp_l, btemp_h,
> - vbat_l, vbat_h, ibat_l, ibat_h);
> + seq_printf(s,
> + "VMAIN_L:0x%X\n"
> + "VMAIN_H:0x%X\n"
> + "BTEMP_L:0x%X\n"
> + "BTEMP_H:0x%X\n"
> + "VBAT_L:0x%X\n"
> + "VBAT_H:0x%X\n"
> + "IBAT_L:0x%X\n"
> + "IBAT_H:0x%X\n",
> + vmain_l, vmain_h, btemp_l, btemp_h,
> + vbat_l, vbat_h, ibat_l, ibat_h);
> +
> + return 0;
> }
>
> static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file)
> @@ -2400,7 +2438,9 @@ static const struct file_operations ab8540_gpadc_otp_calib_fops = {
>
> static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "%d\n", avg_sample);
> + seq_printf(s, "%d\n", avg_sample);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
> @@ -2445,7 +2485,9 @@ static const struct file_operations ab8500_gpadc_avg_sample_fops = {
>
> static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "%d\n", trig_edge);
> + seq_printf(s, "%d\n", trig_edge);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
> @@ -2490,7 +2532,9 @@ static const struct file_operations ab8500_gpadc_trig_edge_fops = {
>
> static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "%d\n", trig_timer);
> + seq_printf(s, "%d\n", trig_timer);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
> @@ -2533,7 +2577,9 @@ static const struct file_operations ab8500_gpadc_trig_timer_fops = {
>
> static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
> {
> - return seq_printf(s, "%d\n", conv_type);
> + seq_printf(s, "%d\n", conv_type);
> +
> + return 0;
> }
>
> static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-03-06 10:54 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-22 2:53 [PATCH 00/27] Convert seq_<foo> output calls to return void Joe Perches
2015-02-22 2:53 ` [PATCH 01/27] staging: lustre: Convert "return seq_printf(...)" uses Joe Perches
2015-02-22 2:53 ` [PATCH 02/27] staging: lustre: Convert seq_ hash functions to return void Joe Perches
2015-02-22 2:53 ` [PATCH 03/27] staging: lustre: Convert uses of "int rc = seq_printf(...)" Joe Perches
2015-03-02 1:22 ` Greg Kroah-Hartman
2015-03-02 3:58 ` [PATCH 03/27 V2] " Joe Perches
2015-02-22 2:53 ` [PATCH 04/27] staging: lustre: Convert remaining uses of "= seq_printf(...)" Joe Perches
2015-02-22 2:53 ` [PATCH 05/27] x86: mtrr: if: Remove use of seq_printf return value Joe Perches
2015-02-22 2:53 ` [PATCH 06/27] power: wakeup: " Joe Perches
2015-02-22 21:38 ` Pavel Machek
2015-02-22 21:52 ` Joe Perches
2015-02-23 11:54 ` Pavel Machek
2015-02-22 2:53 ` [PATCH 07/27] ipmi: " Joe Perches
2015-02-23 23:50 ` Andrew Morton
2015-02-24 1:23 ` Joe Perches
2015-02-22 2:53 ` [PATCH 08/27] rtc: " Joe Perches
2015-02-22 2:53 ` [PATCH 09/27] ipc: " Joe Perches
2015-02-22 2:53 ` [PATCH 10/27] pxa27x_udc: " Joe Perches
2015-02-22 10:22 ` Robert Jarzmik
2015-02-22 2:53 ` [PATCH 11/27] microblaze: mb: " Joe Perches
2015-02-23 11:39 ` Michal Simek
2015-02-22 2:53 ` [PATCH 12/27] nios2: cpuinfo: " Joe Perches
2015-02-22 2:53 ` [PATCH 13/27] ARM: plat-pxa: " Joe Perches
2015-02-22 2:53 ` [PATCH 14/27] openrisc: " Joe Perches
2015-02-22 2:53 ` [PATCH 15/27] cris: " Joe Perches
2015-02-22 2:53 ` [PATCH 16/27] mfd: ab8500-debugfs: " Joe Perches
2015-03-06 10:54 ` Lee Jones [this message]
2015-02-22 2:53 ` [PATCH 17/27] staging: i2o: " Joe Perches
2015-02-22 2:53 ` [PATCH 18/27] staging: rtl8192x: " Joe Perches
2015-02-22 2:53 ` [PATCH 19/27] s390: " Joe Perches
2015-02-22 12:53 ` Sebastian Ott
2015-02-22 2:53 ` [PATCH 20/27] i8k: " Joe Perches
2015-02-22 4:55 ` Guenter Roeck
2015-02-22 2:53 ` [PATCH 21/27] watchdog: bcm281xx: " Joe Perches
2015-02-23 19:29 ` [21/27] " Guenter Roeck
2015-03-27 7:57 ` [PATCH 21/27] " Wim Van Sebroeck
2015-02-22 2:53 ` [PATCH 22/27] proc: " Joe Perches
2015-02-22 2:53 ` [PATCH 23/27] cgroup: " Joe Perches
2015-02-22 13:41 ` Tejun Heo
2015-02-22 2:53 ` [PATCH 24/27] tracing: " Joe Perches
2015-02-22 3:54 ` Steven Rostedt
2015-02-22 4:41 ` Al Viro
2015-02-22 10:39 ` Joe Perches
2015-02-23 17:20 ` Steven Rostedt
2015-02-23 17:36 ` Joe Perches
2015-02-22 2:53 ` [PATCH 25/27] lru_cache: " Joe Perches
2015-02-22 2:53 ` [PATCH 26/27] parisc: " Joe Perches
2015-02-22 2:53 ` [PATCH 27/27] regulator: dbx500: Remove use of seq_puts/seq_printf " Joe Perches
2015-02-23 13:55 ` Mark Brown
2015-02-23 14:52 ` Joe Perches
2015-02-24 8:18 ` Mark Brown
2015-02-22 4:00 ` [PATCH V2 - 15/27] cris: Remove use of seq_printf " Joe Perches
2015-02-23 7:18 ` Jesper Nilsson
2015-02-22 4:02 ` [PATCH V2 - 08/27] rtc: " Joe Perches
2015-02-26 12:10 ` [PATCH 11/27 v2] microblaze: mb: " Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150306105432.GB3318@x1 \
--to=lee.jones@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=joe@perches.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox