Re: [PATCH v11 3/6] devicetree: Add new SKY81452 mfd binding

[Lee Jones <lee.jones@linaro.org>]

Applied, thanks.

On Fri, 27 Feb 2015, gyungoh@gmail.com wrote:

> From: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> 
> Signed-off-by: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> Changes v11:
> Renamed 'skyworks,en-channels' property to led-sources.
> Removed unused property 'skyworks,ovp-level'.
> 
> Changes v10:
> Nothing
> 
> Changes v9:
> Nothing
> 
> Changes v8:
> Made up the example for backlight DT
> 
> Changes v7:
> Nothing
> 
> Changes v6:
> Nothing
> 
> Changes v5:
> Changed DT for regulator : 'lout' node should be defined under 'regulator'
> Removed compatible string from sky81452-regulator driver
> 
> Changes v4:
> Nothing
> 
> Changes v3:
> Nothing
> 
> Changes v2:
> Added reg attribute for I2C slave address
> 
>  Documentation/devicetree/bindings/mfd/sky81452.txt | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/sky81452.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
> new file mode 100644
> index 0000000..3518179
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
> @@ -0,0 +1,35 @@
> +SKY81452 bindings
> +
> +Required properties:
> +- compatible	: Must be "skyworks,sky81452"
> +- reg		: I2C slave address
> +
> +Required child nodes:
> +- backlight	: container node for backlight following the binding
> +		in video/backlight/sky81452-backlight.txt
> +- regulator	: container node for regulators following the binding
> +		in regulator/sky81452-regulator.txt
> +
> +Example:
> +
> +	sky81452@2c {
> +		compatible = "skyworks,sky81452";
> +		reg = <0x2c>;
> +
> +		backlight {
> +			compatible = "skyworks,sky81452-backlight";
> +			name = "pwm-backlight";
> +			led-sources = <0 1 2 3 6>;
> +			skyworks,ignore-pwm;
> +			skyworks,phase-shift;
> +			skyworks,current-limit = <2300>;
> +		};
> +
> +		regulator {
> +			lout {
> +				regulator-name = "sky81452-lout";
> +				regulator-min-microvolt = <4500000>;
> +				regulator-max-microvolt = <8000000>;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog