Re: [PATCHv2 00/12] usb: ulpi bus

[David Cohen <david.a.cohen@linux.intel.com>]

On Wed, Mar 18, 2015 at 10:12:13AM -0700, David Cohen wrote:
> Hi,
> 
> On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote:
> > 
> > Major changes since v1:
> > - calling dwc3_phy_setup earlier and registering the ULPI interface there.
> > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as
> >   suggested by Felipe
> > - dwc3 soft reset before registration of the ULPI interface to sync the clocks
> >   as suggested by David
> > - Including support for the BYT boards that have the GPIOs controlling the reset
> >   and cs signals.
> > 
> > 
> > Heikki Krogerus (12):
> >   usb: add bus type for USB ULPI
> >   usb: dwc3: USB2 PHY register access bits
> >   usb: dwc3: ULPI or UTMI+ select
> >   usb: dwc3: store driver data earlier
> >   usb: dwc3: cache hwparams earlier
> >   usb: dwc3: soft reset to it's own function
> >   usb: dwc3: setup phys earlier
> >   usb: dwc3: add hsphy_interface property
> >   usb: dwc3: pci: add quirk for Baytrails
> >   usb: dwc3: add ULPI interface support
> >   phy: helpers for USB ULPI PHY registering
> >   phy: add driver for TI TUSB1210 ULPI PHY
> 
> Except for my comment on patch "9/12", this version looks fine on my
> side.

Making things official. For the whole series (except 9/12):
Acked-by: David Cohen <david.a.cohen@linux.intel.com>