public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: ajitpal.singh@st.com, pavel@ucw.cz, rui.zhang@intel.com,
	linux-kernel@vger.kernel.org
Subject: Re: patch "drivers: thermal: st: remove several sparse warnings" added to thermal-soc tree
Date: Wed, 8 Apr 2015 08:26:34 +0100	[thread overview]
Message-ID: <20150408072634.GA5162@x1> (raw)
In-Reply-To: <14284396653168@besouro>

On Tue, 07 Apr 2015, Eduardo Valentin wrote:

> 
> This is a simple automated notification to let you know that 
> I've just added the patch titled
> 
>     drivers: thermal: st: remove several sparse warnings
> 
> to my thermal-soc git tree which can be found at
>     git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
> in the fixes branch.
> 
> The patch will show up in the next release of the linux-next tree
> (usually sometime within the next 24 hours during the week.)
> 
> The patch will hopefully also be merged in Linus's tree for the
> next -rc kernel release.
> 
> If you have any questions about this process, please let me know.
> 
> All the best,
> 
> Eduardo Valentin
> 
> ----------
> From 541d529f9845d249d1cb84f1b395e48f0a117e3f Mon Sep 17 00:00:00 2001
> From: Eduardo Valentin <edubezval@gmail.com>
> Date: Tue, 7 Apr 2015 13:42:12 -0700
> Subject: drivers: thermal: st: remove several sparse warnings
> 
> Simple patch to make symbols static. Symbols that are not
> shared with other parts of the kernel can be made static.
> This change also removes several sparse complains.
> 
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Ajit Pal Singh <ajitpal.singh@st.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org

Hold on a second, you can't do that.

Adding these Cc: tags means "this person has been given the opportunity
to comment on the patch but has chosen not to".  However, you've
applied this patch ~1min after sending it to the lists.

Please leave this patch on the lists for some time (I suggest at least
one week) before applying.  This process can be sped-up if the correct
Acks are received.

> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
> ---
>  drivers/thermal/st/st_thermal.c        |  2 +-
>  drivers/thermal/st/st_thermal_memmap.c |  8 ++++----
>  drivers/thermal/st/st_thermal_syscfg.c | 12 ++++++------
>  3 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
> index d1ec580..76c515d 100644
> --- a/drivers/thermal/st/st_thermal.c
> +++ b/drivers/thermal/st/st_thermal.c
> @@ -25,7 +25,7 @@
>   * Function to allocate regfields which are common
>   * between syscfg and memory mapped based sensors
>   */
> -int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
> +static int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
>  {
>  	struct device *dev = sensor->dev;
>  	struct regmap *regmap = sensor->regmap;
> diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
> index bd22339..fc0c9e1 100644
> --- a/drivers/thermal/st/st_thermal_memmap.c
> +++ b/drivers/thermal/st/st_thermal_memmap.c
> @@ -157,7 +157,7 @@ static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
>  };
>  
>  /* Compatible device data stih416 mpe thermal sensor */
> -const struct st_thermal_compat_data st_416mpe_cdata = {
> +static const struct st_thermal_compat_data st_416mpe_cdata = {
>  	.reg_fields		= st_mmap_thermal_regfields,
>  	.ops			= &st_mmap_sensor_ops,
>  	.calibration_val	= 14,
> @@ -166,7 +166,7 @@ const struct st_thermal_compat_data st_416mpe_cdata = {
>  };
>  
>  /* Compatible device data stih407 thermal sensor */
> -const struct st_thermal_compat_data st_407_cdata = {
> +static const struct st_thermal_compat_data st_407_cdata = {
>  	.reg_fields		= st_mmap_thermal_regfields,
>  	.ops			= &st_mmap_sensor_ops,
>  	.calibration_val	= 16,
> @@ -181,12 +181,12 @@ static const struct of_device_id st_mmap_thermal_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
>  
> -int st_mmap_probe(struct platform_device *pdev)
> +static int st_mmap_probe(struct platform_device *pdev)
>  {
>  	return st_thermal_register(pdev,  st_mmap_thermal_of_match);
>  }
>  
> -int st_mmap_remove(struct platform_device *pdev)
> +static int st_mmap_remove(struct platform_device *pdev)
>  {
>  	return st_thermal_unregister(pdev);
>  }
> diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c
> index 65eab72..3df5b789 100644
> --- a/drivers/thermal/st/st_thermal_syscfg.c
> +++ b/drivers/thermal/st/st_thermal_syscfg.c
> @@ -104,7 +104,7 @@ static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
>  };
>  
>  /* Compatible device data for stih415 sas thermal sensor */
> -const struct st_thermal_compat_data st_415sas_cdata = {
> +static const struct st_thermal_compat_data st_415sas_cdata = {
>  	.sys_compat		= "st,stih415-front-syscfg",
>  	.reg_fields		= st_415sas_regfields,
>  	.ops			= &st_syscfg_sensor_ops,
> @@ -114,7 +114,7 @@ const struct st_thermal_compat_data st_415sas_cdata = {
>  };
>  
>  /* Compatible device data for stih415 mpe thermal sensor */
> -const struct st_thermal_compat_data st_415mpe_cdata = {
> +static const struct st_thermal_compat_data st_415mpe_cdata = {
>  	.sys_compat		= "st,stih415-system-syscfg",
>  	.reg_fields		= st_415mpe_regfields,
>  	.ops			= &st_syscfg_sensor_ops,
> @@ -124,7 +124,7 @@ const struct st_thermal_compat_data st_415mpe_cdata = {
>  };
>  
>  /* Compatible device data for stih416 sas thermal sensor */
> -const struct st_thermal_compat_data st_416sas_cdata = {
> +static const struct st_thermal_compat_data st_416sas_cdata = {
>  	.sys_compat		= "st,stih416-front-syscfg",
>  	.reg_fields		= st_416sas_regfields,
>  	.ops			= &st_syscfg_sensor_ops,
> @@ -134,7 +134,7 @@ const struct st_thermal_compat_data st_416sas_cdata = {
>  };
>  
>  /* Compatible device data for stid127 thermal sensor */
> -const struct st_thermal_compat_data st_127_cdata = {
> +static const struct st_thermal_compat_data st_127_cdata = {
>  	.sys_compat		= "st,stid127-cpu-syscfg",
>  	.reg_fields		= st_127_regfields,
>  	.ops			= &st_syscfg_sensor_ops,
> @@ -152,12 +152,12 @@ static const struct of_device_id st_syscfg_thermal_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
>  
> -int st_syscfg_probe(struct platform_device *pdev)
> +static int st_syscfg_probe(struct platform_device *pdev)
>  {
>  	return st_thermal_register(pdev, st_syscfg_thermal_of_match);
>  }
>  
> -int st_syscfg_remove(struct platform_device *pdev)
> +static int st_syscfg_remove(struct platform_device *pdev)
>  {
>  	return st_thermal_unregister(pdev);
>  }

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

       reply	other threads:[~2015-04-08  7:26 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <14284396653168@besouro>
2015-04-08  7:26 ` Lee Jones [this message]
2015-04-08  9:11   ` patch "drivers: thermal: st: remove several sparse warnings" added to thermal-soc tree Pavel Machek
2015-04-08  9:45     ` Lee Jones
2015-04-08  9:59       ` Pavel Machek
2015-04-08 10:16         ` Lee Jones
2015-04-08 10:35           ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150408072634.GA5162@x1 \
    --to=lee.jones@linaro.org \
    --cc=ajitpal.singh@st.com \
    --cc=edubezval@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox