From: Borislav Petkov <bp@alien8.de>
To: Andi Kleen <andi@firstfloor.org>
Cc: x86@kernel.org, luto@kernel.org, linux-kernel@vger.kernel.org,
Andi Kleen <ak@linux.intel.com>
Subject: Re: [PATCH 5/8] x86: Make old K8 swapgs workaround conditional
Date: Sat, 11 Apr 2015 00:01:10 +0200 [thread overview]
Message-ID: <20150410220110.GC28317@pd.tnic> (raw)
In-Reply-To: <1428681033-1549-6-git-send-email-andi@firstfloor.org>
On Fri, Apr 10, 2015 at 08:50:30AM -0700, Andi Kleen wrote:
> From: Andi Kleen <ak@linux.intel.com>
>
> Every gs selector/index reload always paid an extra MFENCE
> between the two SWAPGS. This was to work around an old
> bug in early K8 steppings. All other CPUs don't need the extra
> mfence. Patch the extra MFENCE only in for K8.
>
> Signed-off-by: Andi Kleen <ak@linux.intel.com>
> ---
> arch/x86/include/asm/cpufeature.h | 1 +
> arch/x86/kernel/cpu/amd.c | 3 +++
> arch/x86/kernel/entry_64.S | 10 +++++++++-
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
> index 90a5485..c695fad 100644
> --- a/arch/x86/include/asm/cpufeature.h
> +++ b/arch/x86/include/asm/cpufeature.h
> @@ -255,6 +255,7 @@
> #define X86_BUG_11AP X86_BUG(5) /* Bad local APIC aka 11AP */
> #define X86_BUG_FXSAVE_LEAK X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
> #define X86_BUG_CLFLUSH_MONITOR X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
> +#define X86_BUG_SWAPGS_MFENCE X86_BUG(8) /* SWAPGS may need MFENCE */
>
> #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
>
> diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
> index a220239..e7f5667 100644
> --- a/arch/x86/kernel/cpu/amd.c
> +++ b/arch/x86/kernel/cpu/amd.c
> @@ -551,6 +551,9 @@ static void init_amd_k8(struct cpuinfo_x86 *c)
> if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
> set_cpu_cap(c, X86_FEATURE_REP_GOOD);
>
> + /* Early steppings needed a mfence on swapgs. */
> + set_cpu_cap(c, X86_BUG_SWAPGS_MFENCE);
set_cpu_bug()
and this should not be set on all K8 but for the early steppings only
which need it.
> +
> /*
> * Some BIOSes incorrectly force this feature, but only K8 revision D
> * (model = 0x14) and later actually support it.
> diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
> index 0b74ab0..bb44292 100644
> --- a/arch/x86/kernel/entry_64.S
> +++ b/arch/x86/kernel/entry_64.S
> @@ -1212,13 +1212,21 @@ ENTRY(native_load_gs_index)
> SWAPGS
> gs_change:
> movl %edi,%gs
> -2: mfence /* workaround */
> +2: ASM_NOP3 /* may be replaced with mfence */
> SWAPGS
> popfq_cfi
> ret
> CFI_ENDPROC
> END(native_load_gs_index)
>
> + /* Early K8 systems needed an mfence after swapgs to workaround a bug */
> + .section .altinstr_replacement,"ax"
> +3: mfence
> + .previous
> + .section .altinstructions,"a"
> + altinstruction_entry 2b,3b,X86_BUG_SWAPGS_MFENCE,3,3
> + .previous
> +
What AndyL said.
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
next prev parent reply other threads:[~2015-04-10 22:03 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-10 15:50 Updated RD/WRFS/GSBASE patchkit Andi Kleen
2015-04-10 15:50 ` [PATCH 1/8] percpu: Add a DEFINE_PER_CPU_2PAGE_ALIGNED Andi Kleen
2015-04-10 15:50 ` [PATCH 2/8] x86: Naturally align the debug IST stack Andi Kleen
2015-04-10 18:50 ` Andy Lutomirski
2015-04-10 15:50 ` [PATCH 3/8] x86: Add intrinsics/macros for new rd/wr fs/gs base instructions Andi Kleen
2015-04-10 19:06 ` Andy Lutomirski
2015-04-10 19:07 ` Andy Lutomirski
2015-04-10 15:50 ` [PATCH 4/8] x86: Add support for rd/wr fs/gs base Andi Kleen
2015-04-10 19:12 ` Andy Lutomirski
2015-04-10 20:21 ` Andi Kleen
2015-04-10 20:25 ` Borislav Petkov
2015-04-10 20:52 ` Andi Kleen
2015-04-10 20:53 ` Borislav Petkov
2015-04-10 20:34 ` Andy Lutomirski
2015-04-10 20:41 ` Andi Kleen
2015-04-10 20:47 ` Andy Lutomirski
2015-04-10 20:57 ` Andi Kleen
2015-04-10 21:07 ` Andy Lutomirski
2015-04-10 22:52 ` Andi Kleen
2015-04-10 23:00 ` Andy Lutomirski
2015-04-10 23:05 ` Andi Kleen
2015-04-10 23:15 ` Andy Lutomirski
2015-04-10 23:18 ` Andi Kleen
2015-04-10 23:21 ` Andy Lutomirski
2015-04-10 23:16 ` Andi Kleen
2015-04-13 7:07 ` Jan Beulich
2015-04-10 15:50 ` [PATCH 5/8] x86: Make old K8 swapgs workaround conditional Andi Kleen
2015-04-10 21:46 ` Andy Lutomirski
2015-04-10 22:01 ` Borislav Petkov [this message]
2015-04-10 23:10 ` Andi Kleen
2015-04-11 7:18 ` Borislav Petkov
2015-04-10 15:50 ` [PATCH 6/8] x86: Enumerate kernel FSGS capability in AT_HWCAP2 Andi Kleen
2015-04-10 19:15 ` Andy Lutomirski
2015-04-10 22:14 ` Borislav Petkov
2015-04-10 23:07 ` Andi Kleen
2015-04-10 23:08 ` Andi Kleen
2015-04-11 7:16 ` Borislav Petkov
2015-04-11 8:35 ` Intel FSGSBASE support (was: Re: [PATCH 6/8] x86: Enumerate kernel FSGS capability in AT_HWCAP2) Ingo Molnar
2015-04-10 15:50 ` [PATCH 7/8] x86: Add documentation for rd/wr fs/gs base Andi Kleen
2015-04-10 19:17 ` Andy Lutomirski
2015-04-10 20:22 ` Andi Kleen
2015-04-10 20:38 ` Andy Lutomirski
2015-04-10 20:46 ` Andi Kleen
2015-04-10 20:52 ` Andy Lutomirski
2015-04-10 15:50 ` [PATCH 8/8] x86: Use rd/wr fs/gs base in arch_prctl Andi Kleen
2015-04-10 19:19 ` Andy Lutomirski
2015-04-10 19:58 ` Andi Kleen
-- strict thread matches above, loose matches on Subject: below --
2014-11-10 23:55 [PATCH 1/8] percpu: Add a DEFINE_PER_CPU_2PAGE_ALIGNED Andi Kleen
2014-11-10 23:55 ` [PATCH 5/8] x86: Make old K8 swapgs workaround conditional Andi Kleen
2014-11-11 20:06 ` Andy Lutomirski
2014-10-15 5:11 [PATCH 1/8] percpu: Add a DEFINE_PER_CPU_2PAGE_ALIGNED Andi Kleen
2014-10-15 5:11 ` [PATCH 5/8] x86: Make old K8 swapgs workaround conditional Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150410220110.GC28317@pd.tnic \
--to=bp@alien8.de \
--cc=ak@linux.intel.com \
--cc=andi@firstfloor.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).