Re: [alsa-devel] [PATCH 2/2] mfd: arizona: Update DT binding to support hpdet channel

[Charles Keepax <ckeepax@opensource.wolfsonmicro.com>]

On Fri, Apr 17, 2015 at 05:32:59PM +0900, Inha Song wrote:
> This patch add device tree bindings for the pdata needed to configure
> the Accessory Detect Mode select when Headphone detection.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---
>  Documentation/devicetree/bindings/mfd/arizona.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index 7bd1273..e7cb939 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -49,6 +49,10 @@ Optional properties:
>      input singals. If values less than the number of input signals, elements
>      that has not been specifed are set to 0 by default.
>  
> +  - wlf,hpdet-channel : Headphone detection channel, this filed to be used the
> +    ACCDET_MODE bits in the ACCESSORY_DETECT_MODE_1 register. The valid values
> +    are 0 for HPDETL and 1 for HPDETR.

Lets remove the references to the register bits this tends to add some
confusion to the binding doc review and update to mention the
defines I suggested adding in the other patch.

Thanks,
Charles

> +
>    - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
>      they are being externally supplied. As covered in
>      Documentation/devicetree/bindings/regulator/regulator.txt
> -- 
> 2.0.0.390.gcb682f8
>