Re: [̈́PATCHv4 09/12] usb: dwc3: pci: add quirk for Baytrails

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 2355 bytes --]

On Thu, May 07, 2015 at 09:19:29AM +0300, Heikki Krogerus wrote:
> On some BYT platforms the USB2 PHY needs to be put into
> operational mode by the controller driver with GPIOs
> controlling the PHYs reset and cs signals.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
>  drivers/usb/dwc3/dwc3-pci.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
> index b773fb5..0235f46 100644
> --- a/drivers/usb/dwc3/dwc3-pci.c
> +++ b/drivers/usb/dwc3/dwc3-pci.c
> @@ -21,6 +21,8 @@
>  #include <linux/slab.h>
>  #include <linux/pci.h>
>  #include <linux/platform_device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/acpi.h>
>  
>  #include "platform_data.h"
>  
> @@ -31,6 +33,15 @@
>  #define PCI_DEVICE_ID_INTEL_SPTLP	0x9d30
>  #define PCI_DEVICE_ID_INTEL_SPTH	0xa130
>  
> +static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
> +static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
> +
> +static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
> +	{ "reset-gpios", &reset_gpios, 1 },
> +	{ "cs-gpios", &cs_gpios, 1 },
> +	{ },
> +};
> +
>  static int dwc3_pci_quirks(struct pci_dev *pdev)
>  {
>  	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
> @@ -65,6 +76,30 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
>  						sizeof(pdata));
>  	}
>  
> +	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
> +	    pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
> +		struct gpio_desc *gpio;
> +
> +		acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
> +					  acpi_dwc3_byt_gpios);
> +
> +		/* These GPIOs will turn on the USB2 PHY */
> +		gpio = gpiod_get(&pdev->dev, "cs");
> +		if (!IS_ERR(gpio)) {
> +			gpiod_direction_output(gpio, 0);
> +			gpiod_set_value_cansleep(gpio, 1);
> +			gpiod_put(gpio);
> +		}
> +
> +		gpio = gpiod_get(&pdev->dev, "reset");
> +		if (!IS_ERR(gpio)) {
> +			gpiod_direction_output(gpio, 0);
> +			gpiod_set_value_cansleep(gpio, 1);
> +			gpiod_put(gpio);
> +			msleep(10);

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
#76: FILE: drivers/usb/dwc3/dwc3-pci.c:99:
+			msleep(10);

looks like usleep_range() is more desirable here.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]