From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: broonie@kernel.org, lgirdwood@gmail.com, sameo@linux.intel.com,
patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org
Subject: Re: [RESEND PATCH v3 05/10] mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch
Date: Wed, 13 May 2015 13:21:17 +0100 [thread overview]
Message-ID: <20150513122117.GQ3394@x1> (raw)
In-Reply-To: <1431349090-24173-6-git-send-email-ckeepax@opensource.wolfsonmicro.com>
On Mon, 11 May 2015, Charles Keepax wrote:
> wm5102 applies a custom hardware boot sequence, for this the SYSCLK
> needs to be enabled. This patch factors out the code that enables
> SYSCLK for this sequence such that it can be used for other boot time
> operations that require SYSCLK.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/mfd/arizona-core.c | 77 ++++++++++++++++++++++++++++++++-----------
> 1 files changed, 57 insertions(+), 20 deletions(-)
Applied, thanks.
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 326a4af..b5a7e0e 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -264,19 +264,25 @@ static void arizona_disable_reset(struct arizona *arizona)
> }
> }
>
> -static int wm5102_apply_hardware_patch(struct arizona *arizona)
> +struct arizona_sysclk_state {
> + unsigned int fll;
> + unsigned int sysclk;
> +};
> +
> +static int arizona_enable_freerun_sysclk(struct arizona *arizona,
> + struct arizona_sysclk_state *state)
> {
> - unsigned int fll, sysclk;
> int ret, err;
>
> /* Cache existing FLL and SYSCLK settings */
> - ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &fll);
> + ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &state->fll);
> if (ret) {
> dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
> ret);
> return ret;
> }
> - ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, &sysclk);
> + ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
> + &state->sysclk);
> if (ret) {
> dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
> ret);
> @@ -306,14 +312,58 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
> goto err_fll;
> }
>
> + return 0;
> +
> +err_fll:
> + err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
> + if (err)
> + dev_err(arizona->dev,
> + "Failed to re-apply old FLL settings: %d\n", err);
> +
> + return ret;
> +}
> +
> +static int arizona_disable_freerun_sysclk(struct arizona *arizona,
> + struct arizona_sysclk_state *state)
> +{
> + int ret;
> +
> + ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1,
> + state->sysclk);
> + if (ret) {
> + dev_err(arizona->dev,
> + "Failed to re-apply old SYSCLK settings: %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, state->fll);
> + if (ret) {
> + dev_err(arizona->dev,
> + "Failed to re-apply old FLL settings: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int wm5102_apply_hardware_patch(struct arizona *arizona)
> +{
> + struct arizona_sysclk_state state;
> + int err, ret;
> +
> + ret = arizona_enable_freerun_sysclk(arizona, &state);
> + if (ret)
> + return ret;
> +
> /* Start the write sequencer and wait for it to finish */
> ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
> ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
> if (ret) {
> dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
> ret);
> - goto err_sysclk;
> + goto err;
> }
> +
> ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
> ARIZONA_WSEQ_BUSY, 0);
> if (ret) {
> @@ -322,21 +372,8 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
> ret = -ETIMEDOUT;
> }
>
> -err_sysclk:
> - err = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, sysclk);
> - if (err) {
> - dev_err(arizona->dev,
> - "Failed to re-apply old SYSCLK settings: %d\n",
> - err);
> - }
> -
> -err_fll:
> - err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, fll);
> - if (err) {
> - dev_err(arizona->dev,
> - "Failed to re-apply old FLL settings: %d\n",
> - err);
> - }
> +err:
> + err = arizona_disable_freerun_sysclk(arizona, &state);
>
> return ret ?: err;
> }
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-05-13 12:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 12:58 [RESEND PATCH v3 00/10] wm5110 Boot Fixups Charles Keepax
2015-05-11 12:58 ` [RESEND PATCH v3 01/10] mfd: arizona: Use devres to manage reset GPIO Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 02/10] mfd: arizona: Factor out hard reset into helper functions Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 03/10] mfd: wm5102: Ensure we always boot the device fully Charles Keepax
2015-05-13 12:20 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 04/10] mfd: arizona: Fix formating/style issues in arizona_apply_hardware_patch Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 05/10] mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch Charles Keepax
2015-05-13 12:21 ` Lee Jones [this message]
2015-05-11 12:58 ` [RESEND PATCH v3 06/10] mfd: wm5110: Add register patch required for low power sleep Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 07/10] regulator: arizona-ldo1: Add additional supported voltage Charles Keepax
2015-05-11 14:20 ` Mark Brown
2015-05-11 14:41 ` Charles Keepax
2015-05-11 16:04 ` Mark Brown
2015-05-11 12:58 ` [RESEND PATCH v3 08/10] mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 09/10] mfd: arizona: Add better support for system suspend Charles Keepax
2015-05-13 12:21 ` Lee Jones
2015-05-11 12:58 ` [RESEND PATCH v3 10/10] mfd: wm5110: Add delay before releasing reset line Charles Keepax
2015-05-13 12:22 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150513122117.GQ3394@x1 \
--to=lee.jones@linaro.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox