Re: [PATCH V2 4/7] clocksource: bcm2835: Migrate to new 'set-state' interface

[Viresh Kumar <viresh.kumar@linaro.org>]

On 15-06-15, 20:57, Stephen Warren wrote:
> On 06/12/2015 02:00 AM, Viresh Kumar wrote:
> > Migrate bcm2835 driver to the new 'set-state' interface provided by
> > the clockevents core, the earlier 'set-mode' interface is marked
> > obsolete now.
> > 
> > This also enables us to implement callbacks for new states of clockevent
> > devices, for example: ONESHOT_STOPPED.
> > 
> > We weren't doing anything in the ->set_mode() callback. So, this patch
> > doesn't provide any set-state callbacks.
> 
> This generates a panic at boot (on top of 4.1.0-rc8+, which certainly at
> least booted fine):
> 
> > [    0.008586] clocksource timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
> > [    0.018080] ------------[ cut here ]------------
> > [    0.022843] kernel BUG at kernel/time/clockevents.c:480!
> > [    0.028299] Internal error: Oops - BUG: 0 [#1] ARM
> > [    0.033237] CPU: 0 PID: 0 Comm: swapper Not tainted 4.1.0-rc8+ #46
> > [    0.039567] Hardware name: BCM2835
> > [    0.043092] task: c06fb648 ti: c06f6000 task.ti: c06f6000
> > [    0.048668] PC is at clockevents_register_device+0x15c/0x174

This failed the sanity checks of clockevents core. Did you apply the
first patch as well? Yes, its very much required.

Also, there were dependencies on the latest tip, prepared for 4.2
merge window and would have been better if you tested on top of that.

But those dependencies are for some helpers which aren't used in this
patch. So, it might work over rc8 + the first patch from this series..

In case it doesn't, please test it over tip/master once.

-- 
viresh