[PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

[Michael Brunner <mibru@gmx.de>]

This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
boards to the Kontron PLD driver. The list of supported products in the
module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com> 
---
 drivers/mfd/Kconfig       |  2 ++
 drivers/mfd/kempld-core.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6538159..51809e2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -375,12 +375,14 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bBL6
 		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
 		* COMe-cBL6
 		* COMe-cBT6
+		* COMe-cBW6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
 		* COMe-cHL6
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 8057849..463f4ea 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {
 
 static struct dmi_system_id kempld_dmi_table[] __initdata = {
 	{
+		.ident = "BBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "BHL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CBW6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- 
1.8.5.1