[PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

[PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

[Michael Brunner]

This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
boards to the Kontron PLD driver. The list of supported products in the
module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com> 
---
 drivers/mfd/Kconfig       |  2 ++
 drivers/mfd/kempld-core.c | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6538159..51809e2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -375,12 +375,14 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bBL6
 		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
 		* COMe-cBL6
 		* COMe-cBT6
+		* COMe-cBW6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
 		* COMe-cHL6
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 8057849..463f4ea 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {
 
 static struct dmi_system_id kempld_dmi_table[] __initdata = {
 	{
+		.ident = "BBL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "BHL6",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CBW6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CCR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- 
1.8.5.1

Re: [PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

[Guenter Roeck]

On Tue, Jul 14, 2015 at 01:20:50PM +0200, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
> boards to the Kontron PLD driver. The list of supported products in the
> module description is also updated.
> 
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> Acked-by: Christian Rauch <christian.rauch@kontron.com> 

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Re: [PATCH] mfd: Add support for COMe-bBL6 and COMe-cBW6 to Kontron PLD driver

[Lee Jones]

On Tue, 14 Jul 2015, Michael Brunner wrote:

> This patch adds the DMI system ID of the Kontron COMe-bBL6 and COME-cBW6
> boards to the Kontron PLD driver. The list of supported products in the
> module description is also updated.
> 
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> Acked-by: Christian Rauch <christian.rauch@kontron.com> 
> ---
>  drivers/mfd/Kconfig       |  2 ++
>  drivers/mfd/kempld-core.c | 16 ++++++++++++++++
>  2 files changed, 18 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 6538159..51809e2 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -375,12 +375,14 @@ config MFD_KEMPLD
>  	  device may provide functions like watchdog, GPIO, UART and I2C bus.
>  
>  	  The following modules are supported:
> +		* COMe-bBL6
>  		* COMe-bHL6
>  		* COMe-bIP#
>  		* COMe-bPC2 (ETXexpress-PC)
>  		* COMe-bSC# (ETXexpress-SC T#)
>  		* COMe-cBL6
>  		* COMe-cBT6
> +		* COMe-cBW6
>  		* COMe-cCT6
>  		* COMe-cDC2 (microETXexpress-DC)
>  		* COMe-cHL6
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index 8057849..463f4ea 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -501,6 +501,14 @@ static struct platform_driver kempld_driver = {
>  
>  static struct dmi_system_id kempld_dmi_table[] __initdata = {
>  	{
> +		.ident = "BBL6",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> +			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
> +		},
> +		.driver_data = (void *)&kempld_platform_data_generic,
> +		.callback = kempld_create_platform_device,
> +	}, {
>  		.ident = "BHL6",
>  		.matches = {
>  			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -517,6 +525,14 @@ static struct dmi_system_id kempld_dmi_table[] __initdata = {
>  		.driver_data = (void *)&kempld_platform_data_generic,
>  		.callback = kempld_create_platform_device,
>  	}, {
> +		.ident = "CBW6",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> +			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
> +		},
> +		.driver_data = (void *)&kempld_platform_data_generic,
> +		.callback = kempld_create_platform_device,
> +	}, {
>  		.ident = "CCR2",
>  		.matches = {
>  			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog