Re: [PATCH v2] Drivers: Staging: dgnc: Fix Style Issues

[Craig Inches <craig.inches@xayto.net>]

On Thu, Jul 16, 2015 at 11:13:43PM +0300, Dan Carpenter wrote:
> On Fri, Jul 17, 2015 at 03:03:24AM +0000, Craig Inches wrote:
> > Fixed multiple instances of:
> > 
> > CHECK: Alignment should match open parenthesis
> > CHECK: Blank lines aren't necessary before a close brace '}'
> > CHECK: Please don't use multiple blank lines
> > CHECK: Blank lines aren't necessary after an open brace '{'
> > WARNING: line over 80 characters
> > 
> 
> Split the patch into 5 patches.
	Sorry.. I dont know why I didnt do that.

> > @@ -186,18 +191,23 @@ int dgnc_tty_register(struct dgnc_board *brd)
> >  	brd->SerialDriver.subtype = SERIAL_TYPE_NORMAL;
> >  	brd->SerialDriver.init_termios = DgncDefaultTermios;
> >  	brd->SerialDriver.driver_name = DRVSTR;
> > -	brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
> > +	brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
> > +				  | TTY_DRIVER_HARDWARE_BREAK);
> 
> The operator goes on the end.
> 
> 	brd->SerialDriver.flags = (TTY_DRIVER_REAL_RAW |
> 				   TTY_DRIVER_DYNAMIC_DEV |
> 				   TTY_DRIVER_HARDWARE_BREAK);
	Thanks I saw a combination of either, I will take another look.

> >  	kref_init(&brd->PrintDriver.kref);
> > -	brd->PrintDriver.termios = kcalloc(brd->maxports, sizeof(*brd->PrintDriver.termios), GFP_KERNEL);
> > +	brd->PrintDriver.termios = kcalloc(brd->maxports,
> > +			sizeof(*brd->PrintDriver.termios),
> > +			GFP_KERNEL);
> 
> Not aligned correctly.
> 
> >  	if (ch->ch_tun.un_flags & UN_ISOPEN) {
> >  		if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
> > -			ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
> > -			spin_unlock_irqrestore(&ch->ch_lock, flags);
> > -			(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
> > -			spin_lock_irqsave(&ch->ch_lock, flags);
> > +		    ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
> > +		    spin_unlock_irqrestore(&ch->ch_lock, flags);
> > +		    (ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
> > +		    (ch->ch_tun.un_tty);
> > +		    spin_lock_irqsave(&ch->ch_lock, flags);
> >  		}
> 
> This isn't correct at all.
	OK, Ill another look at this aswell. Thank you for the feedback
	Dan.
> regards,
> dan carpenter
>