* [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad @ 2015-07-22 13:55 duson 2015-07-22 19:55 ` ulrik.debie-os 0 siblings, 1 reply; 3+ messages in thread From: duson @ 2015-07-22 13:55 UTC (permalink / raw) To: linux-input, linux-kernel, Dmitry Torokhov; +Cc: dusonlin t is no need to check the packet[0] for sanity check when doing elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. Signed-off by: Duson Lin <dusonlin@emc.com.tw> --- drivers/input/mouse/elantech.c | 25 ++++++++++++++++++++++--- drivers/input/mouse/elantech.h | 1 + 2 files changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index ce3d400..d969153 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -784,6 +784,8 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) unsigned char *packet = psmouse->packet; unsigned char packet_type = packet[3] & 0x03; bool sanity_check; + /* This represents the version of IC body. */ + int ver = (etd->fw_version & 0x0f0000) >> 16; if (etd->tp_dev && (packet[3] & 0x0f) == 0x06) return PACKET_TRACKPOINT; @@ -796,9 +798,17 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) */ if (etd->crc_enabled) sanity_check = ((packet[3] & 0x08) == 0x00); - else - sanity_check = ((packet[0] & 0x0c) == 0x04 && - (packet[3] & 0x1c) == 0x10); + else { + /* + * The sanity check only need to check packet[3] + * when IC_body = 7 and PID = 0x2A + */ + if (ver == 7 && etd->samples[1] == 0x2A) + sanity_check = ((packet[3] & 0x1c) == 0x10); + else + sanity_check = ((packet[0] & 0x0c) == 0x04 && + (packet[3] & 0x1c) == 0x10); + } if (!sanity_check) return PACKET_UNKNOWN; @@ -1648,6 +1658,15 @@ int elantech_init(struct psmouse *psmouse) etd->capabilities[0], etd->capabilities[1], etd->capabilities[2]); + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, + etd->samples)) { + psmouse_err(psmouse, "failed to query sample data.\n"); + goto init_fail; + } + psmouse_info(psmouse, + "Elan sample query result 0x%02x, 0x%02x, 0x%02x.\n", + etd->samples[0], etd->samples[1], etd->samples[2]); + if (elantech_set_absolute_mode(psmouse)) { psmouse_err(psmouse, "failed to put touchpad into absolute mode.\n"); diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index f965d15..e1cbf40 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -129,6 +129,7 @@ struct elantech_data { unsigned char reg_26; unsigned char debug; unsigned char capabilities[3]; + unsigned char samples[3]; bool paritycheck; bool jumpy_cursor; bool reports_pressure; ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad 2015-07-22 13:55 [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad duson @ 2015-07-22 19:55 ` ulrik.debie-os 2015-07-22 23:57 ` DusonLin 0 siblings, 1 reply; 3+ messages in thread From: ulrik.debie-os @ 2015-07-22 19:55 UTC (permalink / raw) To: duson; +Cc: linux-input, linux-kernel, Dmitry Torokhov On Wed, Jul 22, 2015 at 09:55:51PM +0800, duson wrote: > > t is no need to check the packet[0] for sanity check when doing > elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. > Hi Duson, The laptops below also had issues with crc_enabled and they were solved by the elantech_dmi_force_crc_enabled table. (0dc1587905a50f8f61bbc29e850aa592821e4bea) * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) Does the 0x470f01 laptop maybe have exactly the same issue ? In that case, would it not be better if we could harmonize the solution ? Do you also have the laptop name, firmware version and button configuration available for 0x470f01 and are you in a position to share that information ? > Signed-off by: Duson Lin <dusonlin@emc.com.tw> > --- > drivers/input/mouse/elantech.c | 25 ++++++++++++++++++++++--- > drivers/input/mouse/elantech.h | 1 + > 2 files changed, 23 insertions(+), 3 deletions(-) > > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c > index ce3d400..d969153 100644 > --- a/drivers/input/mouse/elantech.c > +++ b/drivers/input/mouse/elantech.c > @@ -784,6 +784,8 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) > unsigned char *packet = psmouse->packet; > unsigned char packet_type = packet[3] & 0x03; > bool sanity_check; > + /* This represents the version of IC body. */ > + int ver = (etd->fw_version & 0x0f0000) >> 16; > > if (etd->tp_dev && (packet[3] & 0x0f) == 0x06) > return PACKET_TRACKPOINT; > @@ -796,9 +798,17 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) > */ > if (etd->crc_enabled) > sanity_check = ((packet[3] & 0x08) == 0x00); > - else > - sanity_check = ((packet[0] & 0x0c) == 0x04 && > - (packet[3] & 0x1c) == 0x10); > + else { > + /* > + * The sanity check only need to check packet[3] > + * when IC_body = 7 and PID = 0x2A > + */ > + if (ver == 7 && etd->samples[1] == 0x2A) > + sanity_check = ((packet[3] & 0x1c) == 0x10); > + else > + sanity_check = ((packet[0] & 0x0c) == 0x04 && > + (packet[3] & 0x1c) == 0x10); > + } > > if (!sanity_check) > return PACKET_UNKNOWN; > @@ -1648,6 +1658,15 @@ int elantech_init(struct psmouse *psmouse) > etd->capabilities[0], etd->capabilities[1], > etd->capabilities[2]); > > + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, > + etd->samples)) { > + psmouse_err(psmouse, "failed to query sample data.\n"); > + goto init_fail; > + } > + psmouse_info(psmouse, > + "Elan sample query result 0x%02x, 0x%02x, 0x%02x.\n", > + etd->samples[0], etd->samples[1], etd->samples[2]); > + Is this wise to run on all elantech hardware ? > if (elantech_set_absolute_mode(psmouse)) { > psmouse_err(psmouse, > "failed to put touchpad into absolute mode.\n"); > diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h > index f965d15..e1cbf40 100644 > --- a/drivers/input/mouse/elantech.h > +++ b/drivers/input/mouse/elantech.h > @@ -129,6 +129,7 @@ struct elantech_data { > unsigned char reg_26; > unsigned char debug; > unsigned char capabilities[3]; > + unsigned char samples[3]; > bool paritycheck; > bool jumpy_cursor; > bool reports_pressure; > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Kind regards, Ulrik ^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad 2015-07-22 19:55 ` ulrik.debie-os @ 2015-07-22 23:57 ` DusonLin 0 siblings, 0 replies; 3+ messages in thread From: DusonLin @ 2015-07-22 23:57 UTC (permalink / raw) To: ulrik.debie-os; +Cc: linux-input, linux-kernel, 'Dmitry Torokhov' Hi, I think it is different. It looks like the issue about these three laptops are enabled CRC but can't use the sanity check for crc_enabled=1 case. So, they need change to go to crc_enabled=0 case. * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) But the issue for 0x470f01 touchpad is the CRC doesn't enabled and the sanity check for crc_enabled=0 case still can't satisfy the check. BTW, yes, I can share the laptop information, I will upstream patch again. Thanks for your advice. Duson -----Original Message----- From: ulrik.debie-os@e2big.org [mailto:ulrik.debie-os@e2big.org] Sent: Thursday, July 23, 2015 3:55 AM To: duson Cc: linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; Dmitry Torokhov Subject: Re: [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad On Wed, Jul 22, 2015 at 09:55:51PM +0800, duson wrote: > > t is no need to check the packet[0] for sanity check when doing > elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad. > Hi Duson, The laptops below also had issues with crc_enabled and they were solved by the elantech_dmi_force_crc_enabled table. (0dc1587905a50f8f61bbc29e850aa592821e4bea) * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**) Does the 0x470f01 laptop maybe have exactly the same issue ? In that case, would it not be better if we could harmonize the solution ? Do you also have the laptop name, firmware version and button configuration available for 0x470f01 and are you in a position to share that information ? > Signed-off by: Duson Lin <dusonlin@emc.com.tw> > --- > drivers/input/mouse/elantech.c | 25 ++++++++++++++++++++++--- > drivers/input/mouse/elantech.h | 1 + > 2 files changed, 23 insertions(+), 3 deletions(-) > > diff --git a/drivers/input/mouse/elantech.c > b/drivers/input/mouse/elantech.c index ce3d400..d969153 100644 > --- a/drivers/input/mouse/elantech.c > +++ b/drivers/input/mouse/elantech.c > @@ -784,6 +784,8 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) > unsigned char *packet = psmouse->packet; > unsigned char packet_type = packet[3] & 0x03; > bool sanity_check; > + /* This represents the version of IC body. */ > + int ver = (etd->fw_version & 0x0f0000) >> 16; > > if (etd->tp_dev && (packet[3] & 0x0f) == 0x06) > return PACKET_TRACKPOINT; > @@ -796,9 +798,17 @@ static int elantech_packet_check_v4(struct psmouse *psmouse) > */ > if (etd->crc_enabled) > sanity_check = ((packet[3] & 0x08) == 0x00); > - else > - sanity_check = ((packet[0] & 0x0c) == 0x04 && > - (packet[3] & 0x1c) == 0x10); > + else { > + /* > + * The sanity check only need to check packet[3] > + * when IC_body = 7 and PID = 0x2A > + */ > + if (ver == 7 && etd->samples[1] == 0x2A) > + sanity_check = ((packet[3] & 0x1c) == 0x10); > + else > + sanity_check = ((packet[0] & 0x0c) == 0x04 && > + (packet[3] & 0x1c) == 0x10); > + } > > if (!sanity_check) > return PACKET_UNKNOWN; > @@ -1648,6 +1658,15 @@ int elantech_init(struct psmouse *psmouse) > etd->capabilities[0], etd->capabilities[1], > etd->capabilities[2]); > > + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, > + etd->samples)) { > + psmouse_err(psmouse, "failed to query sample data.\n"); > + goto init_fail; > + } > + psmouse_info(psmouse, > + "Elan sample query result 0x%02x, 0x%02x, 0x%02x.\n", > + etd->samples[0], etd->samples[1], etd->samples[2]); > + Is this wise to run on all elantech hardware ? > if (elantech_set_absolute_mode(psmouse)) { > psmouse_err(psmouse, > "failed to put touchpad into absolute mode.\n"); diff --git > a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h > index f965d15..e1cbf40 100644 > --- a/drivers/input/mouse/elantech.h > +++ b/drivers/input/mouse/elantech.h > @@ -129,6 +129,7 @@ struct elantech_data { > unsigned char reg_26; > unsigned char debug; > unsigned char capabilities[3]; > + unsigned char samples[3]; > bool paritycheck; > bool jumpy_cursor; > bool reports_pressure; > > > > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" > in the body of a message to majordomo@vger.kernel.org More majordomo > info at http://vger.kernel.org/majordomo-info.html Kind regards, Ulrik ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-07-22 23:58 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-07-22 13:55 [PATCH] Input - elantech: Add special check for fw_version 0x470f01 touchpad duson 2015-07-22 19:55 ` ulrik.debie-os 2015-07-22 23:57 ` DusonLin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox