From: Mark Rutland <mark.rutland@arm.com>
To: Suneel Garapati <suneel.garapati@xilinx.com>
Cc: "rtc-linux@googlegroups.com" <rtc-linux@googlegroups.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
"michals@xilinx.com" <michals@xilinx.com>,
"sorenb@xilinx.com" <sorenb@xilinx.com>
Subject: Re: [PATCH 1/2] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc
Date: Thu, 23 Jul 2015 12:55:55 +0100 [thread overview]
Message-ID: <20150723115555.GC12330@leverpostej> (raw)
In-Reply-To: <1437648710-6857-1-git-send-email-suneel.garapati@xilinx.com>
On Thu, Jul 23, 2015 at 11:51:49AM +0100, Suneel Garapati wrote:
> adds file for description on device node bindings for RTC
> found on Xilinx Zynq Ultrascale+ MPSoC.
>
> Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
> ---
> Documentation/devicetree/bindings/rtc/xlnx-rtc.txt | 25 ++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
>
> diff --git a/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
> new file mode 100644
> index 0000000..2b05243
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt
> @@ -0,0 +1,25 @@
> +* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
> +
> +RTC controller for the Xilinx Zynq MPSoC Real Time Clock
> +Separate IRQ lines for seconds and alarm
> +
> +Required properties:
> +- compatible: Should be "xlnx,zynqmp-rtc"
> +- reg: Physical base address of the controller and length
> + of memory mapped region.
> +- interrupts: IRQ lines for the RTC.
> +- interrupt names: Names for interrupt lines
interrupt-names has a '-', and you need to state which names are
expected.
> +
> +Optional:
> +- calibration: calibration value for 1 sec period which will
> + be programmed directly to calibration register
When and why would I set this?
Mark.
> +
> +Example:
> +rtc: rtc@ffa60000 {
> + compatible = "xlnx,zynqmp-rtc";
> + reg = <0x0 0xffa60000 0x100>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 26 4>, <0 27 4>;
> + interrupt-names = "alm", "sec";
> + calibration = <0x198233>;
> +};
> --
> 2.1.2
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
prev parent reply other threads:[~2015-07-23 11:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 10:51 [PATCH 1/2] devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc Suneel Garapati
2015-07-23 10:51 ` [PATCH 2/2] drivers: rtc: add xilinx zynqmp rtc driver Suneel Garapati
2015-07-23 11:55 ` Mark Rutland [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150723115555.GC12330@leverpostej \
--to=mark.rutland@arm.com \
--cc=a.zummo@towertech.it \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michals@xilinx.com \
--cc=rtc-linux@googlegroups.com \
--cc=sorenb@xilinx.com \
--cc=suneel.garapati@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox