* Re: [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
2015-08-03 12:37 ` [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for " Krzysztof Kozlowski
@ 2015-08-03 18:52 ` Anand Moon
2015-08-05 10:53 ` Javier Martinez Canillas
2015-08-10 15:49 ` Lee Jones
2 siblings, 0 replies; 8+ messages in thread
From: Anand Moon @ 2015-08-03 18:52 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Sangbeom Kim, Krzysztof Kozlowski, Lee Jones, Linux Kernel,
linux-samsung-soc@vger.kernel.org, devicetree, Kukjin Kim,
linux-arm-kernel
Hi Krzysztof,
On 3 August 2015 at 18:07, Krzysztof Kozlowski <k.kozlowski.k@gmail.com> wrote:
> On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1
> register must be manually set to 0 before initiating power off sequence.
>
> One of usual power down methods for Exynos based devices looks like:
> 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos.
> 2. Exynos holds up this pin during system operation.
> 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in
> other device.
> 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if
> ACOKB goes high.
>
> On Odroid XU3 family the difference is in (3) - the ACOKB is grounded.
> This means that PMIC must manually set PWRHOLD field to low and then
> wait for signal from Application Processor (the usual change in
> PWRHOLD/PSHOLD pin will actually cut off the power).
>
> The patch adds respective binding allowing Odroid XU3 device to be
> powered off.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> Reported-by: Anand Moon <linux.amoon@gmail.com>
>
> ---
>
> Patch is losely based on patch in Hardkernel repository [0] and previous
> work of Anand Moon [1].
>
> [0] https://github.com/hardkernel/linux/commit/6897e62ba328bd1c8c095d918101863250cd73e7
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg45959.html
> ---
> Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 +++
> drivers/mfd/sec-core.c | 31 +++++++++++++++++++++++
> include/linux/mfd/samsung/core.h | 2 ++
> include/linux/mfd/samsung/s2mps11.h | 1 +
> 4 files changed, 38 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 57a045016fca..90eaef393325 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -15,6 +15,10 @@ Optional properties:
> - interrupt-parent: Specifies the phandle of the interrupt controller to which
> the interrupts from s2mps11 are delivered to.
> - interrupts: Interrupt specifiers for interrupt sources.
> +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
> + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
> + register to turn off the power. Usually the ACOKB is pulled up to VBATT so
> + when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
>
> Optional nodes:
> - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index d206a3e8fe87..a56ab2102a32 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -278,6 +278,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
> * not parsed here.
> */
>
> + pd->manual_poweroff = of_property_read_bool(dev->of_node,
> + "samsung,s2mps11-acokb-ground");
> return pd;
> }
> #else
> @@ -440,6 +442,34 @@ static int sec_pmic_remove(struct i2c_client *i2c)
> return 0;
> }
>
> +static void sec_pmic_shutdown(struct i2c_client *i2c)
> +{
> + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
> + unsigned int reg, mask;
> +
> + if (!sec_pmic->pdata->manual_poweroff)
> + return;
> +
> + switch (sec_pmic->device_type) {
> + case S2MPS11X:
> + reg = S2MPS11_REG_CTRL1;
> + mask = S2MPS11_CTRL1_PWRHOLD_MASK;
> + break;
> + default:
> + /*
> + * Currently only one board with S2MPS11 needs this, so just
> + * ignore the rest.
> + */
> + dev_warn(sec_pmic->dev,
> + "Unsupported device %lu for manual power off\n",
> + sec_pmic->device_type);
> + return;
> + }
> +
> + regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
> +}
> +
> +
> #ifdef CONFIG_PM_SLEEP
> static int sec_pmic_suspend(struct device *dev)
> {
> @@ -491,6 +521,7 @@ static struct i2c_driver sec_pmic_driver = {
> },
> .probe = sec_pmic_probe,
> .remove = sec_pmic_remove,
> + .shutdown = sec_pmic_shutdown,
> .id_table = sec_pmic_id,
> };
>
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 75115384f3fc..aa78957e092f 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -132,6 +132,8 @@ struct sec_platform_data {
> int buck2_init;
> int buck3_init;
> int buck4_init;
> + /* Whether or not manually set PWRHOLD to low during shutdown. */
> + bool manual_poweroff;
> };
>
> /**
> diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
> index 7981a9d77d3f..b288965e8101 100644
> --- a/include/linux/mfd/samsung/s2mps11.h
> +++ b/include/linux/mfd/samsung/s2mps11.h
> @@ -179,6 +179,7 @@ enum s2mps11_regulators {
> #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
> #define S2MPS11_RAMP_DELAY 25000 /* uV/us */
>
> +#define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4)
>
> #define S2MPS11_BUCK2_RAMP_SHIFT 6
> #define S2MPS11_BUCK34_RAMP_SHIFT 4
> --
> 2.1.4
>
Thanks. Tested on Odroid-XU3 board.
Tested-by: Anand Moon <linux.amoon@gmail.com>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
2015-08-03 12:37 ` [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for " Krzysztof Kozlowski
2015-08-03 18:52 ` Anand Moon
@ 2015-08-05 10:53 ` Javier Martinez Canillas
2015-08-10 15:49 ` Lee Jones
2 siblings, 0 replies; 8+ messages in thread
From: Javier Martinez Canillas @ 2015-08-05 10:53 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sangbeom Kim, Krzysztof Kozlowski, Lee Jones,
linux-kernel, linux-samsung-soc, devicetree, Kukjin Kim,
linux-arm-kernel
Cc: Anand Moon
Hello Krzysztof,
On 08/03/2015 02:37 PM, Krzysztof Kozlowski wrote:
> On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1
> register must be manually set to 0 before initiating power off sequence.
>
> One of usual power down methods for Exynos based devices looks like:
> 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos.
> 2. Exynos holds up this pin during system operation.
> 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in
> other device.
> 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if
> ACOKB goes high.
>
> On Odroid XU3 family the difference is in (3) - the ACOKB is grounded.
> This means that PMIC must manually set PWRHOLD field to low and then
> wait for signal from Application Processor (the usual change in
> PWRHOLD/PSHOLD pin will actually cut off the power).
>
Is nice to finally have an explanation about why this is needed.
> The patch adds respective binding allowing Odroid XU3 device to be
> powered off.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> Reported-by: Anand Moon <linux.amoon@gmail.com>
>
> ---
>
> Patch is losely based on patch in Hardkernel repository [0] and previous
> work of Anand Moon [1].
>
> [0] https://github.com/hardkernel/linux/commit/6897e62ba328bd1c8c095d918101863250cd73e7
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg45959.html
> ---
> Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 +++
> drivers/mfd/sec-core.c | 31 +++++++++++++++++++++++
> include/linux/mfd/samsung/core.h | 2 ++
> include/linux/mfd/samsung/s2mps11.h | 1 +
> 4 files changed, 38 insertions(+)
>
The patch looks good to me.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
2015-08-03 12:37 ` [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for " Krzysztof Kozlowski
2015-08-03 18:52 ` Anand Moon
2015-08-05 10:53 ` Javier Martinez Canillas
@ 2015-08-10 15:49 ` Lee Jones
2015-08-10 23:45 ` Krzysztof Kozlowski
2 siblings, 1 reply; 8+ messages in thread
From: Lee Jones @ 2015-08-10 15:49 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Sangbeom Kim, Krzysztof Kozlowski, linux-kernel,
linux-samsung-soc, devicetree, Kukjin Kim, linux-arm-kernel,
Anand Moon
On Mon, 03 Aug 2015, Krzysztof Kozlowski wrote:
> On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1
> register must be manually set to 0 before initiating power off sequence.
>
> One of usual power down methods for Exynos based devices looks like:
> 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos.
> 2. Exynos holds up this pin during system operation.
> 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in
> other device.
> 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if
> ACOKB goes high.
>
> On Odroid XU3 family the difference is in (3) - the ACOKB is grounded.
> This means that PMIC must manually set PWRHOLD field to low and then
> wait for signal from Application Processor (the usual change in
> PWRHOLD/PSHOLD pin will actually cut off the power).
>
> The patch adds respective binding allowing Odroid XU3 device to be
> powered off.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
> Reported-by: Anand Moon <linux.amoon@gmail.com>
>
> ---
>
> Patch is losely based on patch in Hardkernel repository [0] and previous
> work of Anand Moon [1].
>
> [0] https://github.com/hardkernel/linux/commit/6897e62ba328bd1c8c095d918101863250cd73e7
> [1] http://www.spinics.net/lists/linux-samsung-soc/msg45959.html
> ---
> Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 +++
> drivers/mfd/sec-core.c | 31 +++++++++++++++++++++++
> include/linux/mfd/samsung/core.h | 2 ++
> include/linux/mfd/samsung/s2mps11.h | 1 +
> 4 files changed, 38 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index 57a045016fca..90eaef393325 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -15,6 +15,10 @@ Optional properties:
> - interrupt-parent: Specifies the phandle of the interrupt controller to which
> the interrupts from s2mps11 are delivered to.
> - interrupts: Interrupt specifiers for interrupt sources.
> +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
> + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
> + register to turn off the power. Usually the ACOKB is pulled up to VBATT so
> + when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
Binding looks fine. Please seperate it into a different patch and
apply my Ack:
Acked-by: Lee Jones <lee.jones@linaro.org>
> Optional nodes:
> - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index d206a3e8fe87..a56ab2102a32 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -278,6 +278,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
> * not parsed here.
> */
>
> + pd->manual_poweroff = of_property_read_bool(dev->of_node,
> + "samsung,s2mps11-acokb-ground");
> return pd;
> }
> #else
> @@ -440,6 +442,34 @@ static int sec_pmic_remove(struct i2c_client *i2c)
> return 0;
> }
>
> +static void sec_pmic_shutdown(struct i2c_client *i2c)
> +{
> + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
> + unsigned int reg, mask;
> +
> + if (!sec_pmic->pdata->manual_poweroff)
> + return;
> +
> + switch (sec_pmic->device_type) {
> + case S2MPS11X:
> + reg = S2MPS11_REG_CTRL1;
> + mask = S2MPS11_CTRL1_PWRHOLD_MASK;
> + break;
> + default:
> + /*
> + * Currently only one board with S2MPS11 needs this, so just
> + * ignore the rest.
> + */
> + dev_warn(sec_pmic->dev,
> + "Unsupported device %lu for manual power off\n",
> + sec_pmic->device_type);
> + return;
> + }
> +
> + regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
> +}
> +
> +
Remove the extra '\n'.
When you resubmit, apply my Ack:
Acked-by: Lee Jones <lee.jones@linaro.org>
> #ifdef CONFIG_PM_SLEEP
> static int sec_pmic_suspend(struct device *dev)
> {
> @@ -491,6 +521,7 @@ static struct i2c_driver sec_pmic_driver = {
> },
> .probe = sec_pmic_probe,
> .remove = sec_pmic_remove,
> + .shutdown = sec_pmic_shutdown,
> .id_table = sec_pmic_id,
> };
>
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 75115384f3fc..aa78957e092f 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -132,6 +132,8 @@ struct sec_platform_data {
> int buck2_init;
> int buck3_init;
> int buck4_init;
> + /* Whether or not manually set PWRHOLD to low during shutdown. */
> + bool manual_poweroff;
> };
>
> /**
> diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
> index 7981a9d77d3f..b288965e8101 100644
> --- a/include/linux/mfd/samsung/s2mps11.h
> +++ b/include/linux/mfd/samsung/s2mps11.h
> @@ -179,6 +179,7 @@ enum s2mps11_regulators {
> #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
> #define S2MPS11_RAMP_DELAY 25000 /* uV/us */
>
> +#define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4)
>
> #define S2MPS11_BUCK2_RAMP_SHIFT 6
> #define S2MPS11_BUCK34_RAMP_SHIFT 4
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH 1/2] mfd: s2mps11: Add manual shutdown method for Odroid XU3
2015-08-10 15:49 ` Lee Jones
@ 2015-08-10 23:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2015-08-10 23:45 UTC (permalink / raw)
To: Lee Jones, Krzysztof Kozlowski
Cc: Sangbeom Kim, linux-kernel, linux-samsung-soc, devicetree,
Kukjin Kim, linux-arm-kernel, Anand Moon
On 11.08.2015 00:49, Lee Jones wrote:
> On Mon, 03 Aug 2015, Krzysztof Kozlowski wrote:
>
>> On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1
>> register must be manually set to 0 before initiating power off sequence.
>>
>> One of usual power down methods for Exynos based devices looks like:
>> 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos.
>> 2. Exynos holds up this pin during system operation.
>> 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in
>> other device.
>> 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if
>> ACOKB goes high.
>>
>> On Odroid XU3 family the difference is in (3) - the ACOKB is grounded.
>> This means that PMIC must manually set PWRHOLD field to low and then
>> wait for signal from Application Processor (the usual change in
>> PWRHOLD/PSHOLD pin will actually cut off the power).
>>
>> The patch adds respective binding allowing Odroid XU3 device to be
>> powered off.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>> Reported-by: Anand Moon <linux.amoon@gmail.com>
>>
>> ---
>>
>> Patch is losely based on patch in Hardkernel repository [0] and previous
>> work of Anand Moon [1].
>>
>> [0] https://github.com/hardkernel/linux/commit/6897e62ba328bd1c8c095d918101863250cd73e7
>> [1] http://www.spinics.net/lists/linux-samsung-soc/msg45959.html
>> ---
>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 4 +++
>> drivers/mfd/sec-core.c | 31 +++++++++++++++++++++++
>> include/linux/mfd/samsung/core.h | 2 ++
>> include/linux/mfd/samsung/s2mps11.h | 1 +
>> 4 files changed, 38 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index 57a045016fca..90eaef393325 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -15,6 +15,10 @@ Optional properties:
>> - interrupt-parent: Specifies the phandle of the interrupt controller to which
>> the interrupts from s2mps11 are delivered to.
>> - interrupts: Interrupt specifiers for interrupt sources.
>
>> +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
>> + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
>> + register to turn off the power. Usually the ACOKB is pulled up to VBATT so
>> + when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
>
> Binding looks fine. Please seperate it into a different patch and
> apply my Ack:
>
> Acked-by: Lee Jones <lee.jones@linaro.org>
OK
>
>> Optional nodes:
>> - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
>> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
>> index d206a3e8fe87..a56ab2102a32 100644
>> --- a/drivers/mfd/sec-core.c
>> +++ b/drivers/mfd/sec-core.c
>> @@ -278,6 +278,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
>> * not parsed here.
>> */
>>
>> + pd->manual_poweroff = of_property_read_bool(dev->of_node,
>> + "samsung,s2mps11-acokb-ground");
>> return pd;
>> }
>> #else
>> @@ -440,6 +442,34 @@ static int sec_pmic_remove(struct i2c_client *i2c)
>> return 0;
>> }
>>
>> +static void sec_pmic_shutdown(struct i2c_client *i2c)
>> +{
>> + struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
>> + unsigned int reg, mask;
>> +
>> + if (!sec_pmic->pdata->manual_poweroff)
>> + return;
>> +
>> + switch (sec_pmic->device_type) {
>> + case S2MPS11X:
>> + reg = S2MPS11_REG_CTRL1;
>> + mask = S2MPS11_CTRL1_PWRHOLD_MASK;
>> + break;
>> + default:
>> + /*
>> + * Currently only one board with S2MPS11 needs this, so just
>> + * ignore the rest.
>> + */
>> + dev_warn(sec_pmic->dev,
>> + "Unsupported device %lu for manual power off\n",
>> + sec_pmic->device_type);
>> + return;
>> + }
>> +
>> + regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, 0);
>> +}
>> +
>> +
>
> Remove the extra '\n'.
>
> When you resubmit, apply my Ack:
>
> Acked-by: Lee Jones <lee.jones@linaro.org>
Sure, I'll resend. The patch may go through your tree because there are
no external dependencies.
Best regards,
Krzysztof
>
>> #ifdef CONFIG_PM_SLEEP
>> static int sec_pmic_suspend(struct device *dev)
>> {
>> @@ -491,6 +521,7 @@ static struct i2c_driver sec_pmic_driver = {
>> },
>> .probe = sec_pmic_probe,
>> .remove = sec_pmic_remove,
>> + .shutdown = sec_pmic_shutdown,
>> .id_table = sec_pmic_id,
>> };
>>
>> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
>> index 75115384f3fc..aa78957e092f 100644
>> --- a/include/linux/mfd/samsung/core.h
>> +++ b/include/linux/mfd/samsung/core.h
>> @@ -132,6 +132,8 @@ struct sec_platform_data {
>> int buck2_init;
>> int buck3_init;
>> int buck4_init;
>> + /* Whether or not manually set PWRHOLD to low during shutdown. */
>> + bool manual_poweroff;
>> };
>>
>> /**
>> diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
>> index 7981a9d77d3f..b288965e8101 100644
>> --- a/include/linux/mfd/samsung/s2mps11.h
>> +++ b/include/linux/mfd/samsung/s2mps11.h
>> @@ -179,6 +179,7 @@ enum s2mps11_regulators {
>> #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1)
>> #define S2MPS11_RAMP_DELAY 25000 /* uV/us */
>>
>> +#define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4)
>>
>> #define S2MPS11_BUCK2_RAMP_SHIFT 6
>> #define S2MPS11_BUCK34_RAMP_SHIFT 4
>
^ permalink raw reply [flat|nested] 8+ messages in thread