From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
To: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
linux-kernel@vger.kernel.org,
Adrian Hunter <adrian.hunter@intel.com>,
Ingo Molnar <mingo@redhat.com>, Paul Mackerras <paulus@samba.org>,
Jiri Olsa <jolsa@kernel.org>, Namhyung Kim <namhyung@kernel.org>,
Borislav Petkov <bp@suse.de>,
Hemant Kumar <hemant@linux.vnet.ibm.com>
Subject: [RFC PATCH perf/core v3 14/17] perf probe: Accept %sdt and %cached event name
Date: Sat, 15 Aug 2015 20:43:23 +0900 [thread overview]
Message-ID: <20150815114323.13642.42503.stgit@localhost.localdomain> (raw)
In-Reply-To: <20150815114252.13642.62690.stgit@localhost.localdomain>
To improbe usability, support %[PROVIDER:]SDTEVENT format to
add new probes on SDT and cached events.
e.g.
----
# perf probe -x /lib/libc-2.17.so %lll_lock_wait_private
Added new event:
sdt_libc:lll_lock_wait_private (on %lll_lock_wait_private in
/usr/lib/libc-2.17.so)
You can now use it in all perf tools, such as:
perf record -e sdt_libc:lll_lock_wait_private -aR sleep 1
# perf probe -l | more
sdt_libc:lll_lock_wait_private (on __lll_lock_wait_private+21
in /usr/lib/libc-2.17.so)
----
Note that this is not only for SDT events, but also normal
events with event-name.
e.g. define "myevent" on cache (-n doesn't add the real probe)
----
# perf probe -x ./perf --cache -n --add 'myevent=dso__load $params'
----
Reuse the "myevent" from cache as below.
----
# perf probe -x ./perf %myevent
----
TODO:
Wildcard is not supported yet.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
---
tools/perf/Documentation/perf-probe.txt | 3 +
tools/perf/util/probe-event.c | 78 ++++++++++++++++++++++---------
tools/perf/util/probe-event.h | 1
tools/perf/util/probe-file.c | 9 ++++
4 files changed, 69 insertions(+), 22 deletions(-)
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 8d09173..1d38221 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -151,11 +151,14 @@ Probe points are defined by following syntax.
3) Define event based on source file with lazy pattern
[EVENT=]SRC;PTN [ARG ...]
+ 4) Pre-defined SDT events
+ %[PROVIDER:]SDTEVENT
'EVENT' specifies the name of new event, if omitted, it will be set the name of the probed function. Currently, event group name is set as 'probe'.
'FUNC' specifies a probed function name, and it may have one of the following options; '+OFFS' is the offset from function entry address in bytes, ':RLN' is the relative-line number from function entry line, and '%return' means that it probes function return. And ';PTN' means lazy matching pattern (see LAZY MATCHING). Note that ';PTN' must be the end of the probe point definition. In addition, '@SRC' specifies a source file which has that function.
It is also possible to specify a probe point by the source line number or lazy matching by using 'SRC:ALN' or 'SRC;PTN' syntax, where 'SRC' is the source file path, ':ALN' is the line number and ';PTN' is the lazy matching pattern.
'ARG' specifies the arguments of this probe point, (see PROBE ARGUMENT).
+'SDTEVENT' and 'PROVIDER' is the pre-defined event name which is defined by user SDT (Statically Defined Tracing) or the pre-cached probes with event name.
PROBE ARGUMENT
--------------
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index c559f01..92e800e 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1132,6 +1132,34 @@ err:
return err;
}
+static int parse_perf_probe_event_name(char **arg, struct perf_probe_event *pev)
+{
+ char *ptr;
+
+ ptr = strchr(*arg, ':');
+ if (ptr) {
+ *ptr = '\0';
+ if (!is_c_func_name(*arg))
+ goto ng_name;
+ pev->group = strdup(*arg);
+ if (!pev->group)
+ return -ENOMEM;
+ *arg = ptr + 1;
+ } else
+ pev->group = NULL;
+ if (!is_c_func_name(*arg)) {
+ng_name:
+ semantic_error("%s is bad for event name -it must "
+ "follow C symbol-naming rule.\n", *arg);
+ return -EINVAL;
+ }
+ pev->event = strdup(*arg);
+ if (pev->event == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
/* Parse probepoint definition. */
static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev)
{
@@ -1139,38 +1167,43 @@ static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev)
char *ptr, *tmp;
char c, nc = 0;
bool file_spec = false;
+ int ret;
+
/*
* <Syntax>
* perf probe [GRP:][EVENT=]SRC[:LN|;PTN]
* perf probe [GRP:][EVENT=]FUNC[@SRC][+OFFS|%return|:LN|;PAT]
+ * perf probe %[GRP:]SDT_EVENT
*/
if (!arg)
return -EINVAL;
+ if (arg[0] == '%') {
+ pev->sdt = true;
+ arg++;
+ }
+
ptr = strpbrk(arg, ";=@+%");
- if (ptr && *ptr == '=') { /* Event name */
- *ptr = '\0';
- tmp = ptr + 1;
- ptr = strchr(arg, ':');
+ if (pev->sdt) {
if (ptr) {
- *ptr = '\0';
- if (!is_c_func_name(arg))
- goto not_fname;
- pev->group = strdup(arg);
- if (!pev->group)
- return -ENOMEM;
- arg = ptr + 1;
- } else
- pev->group = NULL;
- if (!is_c_func_name(arg)) {
-not_fname:
- semantic_error("%s is bad for event name -it must "
- "follow C symbol-naming rule.\n", arg);
+ semantic_error("%s must contain only an SDT event name.\n", arg);
return -EINVAL;
}
- pev->event = strdup(arg);
- if (pev->event == NULL)
- return -ENOMEM;
+ ret = parse_perf_probe_event_name(&arg, pev);
+ if (ret == 0) {
+ if (asprintf(&pev->point.function, "%%%s", pev->event) < 0)
+ ret = -errno;
+ }
+ return ret;
+ }
+
+ if (ptr && *ptr == '=') { /* Event name */
+ *ptr = '\0';
+ tmp = ptr + 1;
+ ret = parse_perf_probe_event_name(&arg, pev);
+ if (ret < 0)
+ return ret;
+
arg = tmp;
}
@@ -2620,7 +2653,8 @@ static int find_probe_trace_events_from_cache(struct perf_probe_event *pev,
pev->point.function);
}
if (!entry) {
- ret = 0;
+ /* SDT must be in the cache */
+ ret = pev->sdt ? -ENOENT : 0;
goto out;
}
@@ -2659,7 +2693,7 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev,
{
int ret;
- if (!pev->group) {
+ if (!pev->group && !pev->sdt) {
/* Set group name if not given */
if (!pev->uprobes) {
pev->group = strdup(PERFPROBE_GROUP);
diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h
index fdea725..2cd60e6 100644
--- a/tools/perf/util/probe-event.h
+++ b/tools/perf/util/probe-event.h
@@ -84,6 +84,7 @@ struct perf_probe_event {
char *group; /* Group name */
struct perf_probe_point point; /* Probe point */
int nargs; /* Number of arguments */
+ bool sdt; /* SDT/cached event flag */
bool uprobes; /* Uprobe event flag */
char *target; /* Target binary */
struct perf_probe_arg *args; /* Arguments */
diff --git a/tools/perf/util/probe-file.c b/tools/perf/util/probe-file.c
index 7e2b4f8..018c443 100644
--- a/tools/perf/util/probe-file.c
+++ b/tools/perf/util/probe-file.c
@@ -504,6 +504,15 @@ probe_cache__find(struct probe_cache *pcache, struct perf_probe_event *pev)
return NULL;
list_for_each_entry(entry, &pcache->list, list) {
+ if (pev->sdt) {
+ if (entry->pev.event &&
+ streql(entry->pev.event, pev->event) &&
+ (!pev->group ||
+ streql(entry->pev.group, pev->group)))
+ goto found;
+
+ continue;
+ }
/* Hit if same event name or same command-string */
if ((pev->event &&
(streql(entry->pev.group, pev->group) &&
next prev parent reply other threads:[~2015-08-15 11:50 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-15 11:42 [RFC PATCH perf/core v3 00/17] perf-probe --cache and SDT support Masami Hiramatsu
2015-08-15 11:42 ` [RFC PATCH perf/core v3 01/17] perf probe: Use strbuf for making strings in probe-event.c Masami Hiramatsu
2015-08-28 15:56 ` Arnaldo Carvalho de Melo
2015-08-15 11:42 ` [RFC PATCH perf/core v3 02/17] perf-buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid Masami Hiramatsu
2015-08-28 16:07 ` Arnaldo Carvalho de Melo
2015-08-15 11:42 ` [RFC PATCH perf/core v3 03/17] perf buildid: Introduce sysfs/filename__sprintf_build_id Masami Hiramatsu
2015-08-28 16:14 ` Arnaldo Carvalho de Melo
2015-08-31 8:32 ` [tip:perf/core] perf buildid: Introduce sysfs/ filename__sprintf_build_id tip-bot for Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 04/17] perf: Add lsdir to read a directory Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 05/17] perf-buildid-cache: Use lsdir for looking up buildid caches Masami Hiramatsu
2015-08-28 16:17 ` Arnaldo Carvalho de Melo
2015-08-15 11:43 ` [RFC PATCH perf/core v3 06/17] perf probe: Add --cache option to cache the probe definitions Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 07/17] perf probe: Use cache entry if possible Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 08/17] perf probe: Show all cached probes Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 09/17] perf probe: Remove caches when --cache is given Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 10/17] perf/sdt: ELF support for SDT Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 11/17] perf probe: Add group name support Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 12/17] perf-probe: Set default kprobe group name if it is not given Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 13/17] perf buildid-cache: Scan and import user SDT events to probe cache Masami Hiramatsu
2015-08-15 11:43 ` Masami Hiramatsu [this message]
2015-08-15 11:43 ` [RFC PATCH perf/core v3 15/17] perf-list: Show SDT events Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 16/17] perf-list: Skip SDTs placed in invalid binaries Masami Hiramatsu
2015-08-15 11:43 ` [RFC PATCH perf/core v3 17/17] perf record: Support recording SDT events Masami Hiramatsu
2015-08-19 8:30 ` [RFC PATCH perf/core v3 00/17] perf-probe --cache and SDT support Namhyung Kim
2015-08-19 15:15 ` 平松雅巳 / HIRAMATU,MASAMI
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150815114323.13642.42503.stgit@localhost.localdomain \
--to=masami.hiramatsu.pt@hitachi.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=bp@suse.de \
--cc=hemant@linux.vnet.ibm.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox