Re: [PATCH] x86/math-emu: Add support for FCMOVcc and F[U]COMI[P] insns

[Ingo Molnar <mingo@kernel.org>]

* Denys Vlasenko <dvlasenk@redhat.com> wrote:

> >  static FUNC const st_instr_table[64] = {
> > -	fadd__,  fld_i_,  fcmovb,   fcmovnb,  fadd_i,  ffree_,  faddp_,  _df_c0_,
> > -	fmul__,  fxch_i,  fcmove,   fcmovne,  fmul_i,  _dd_c8_, fmulp_,  _df_c8_,
> > -	fcom_st, fp_nop,  fcmovbe,  fcmovnbe, _dc_d0_, fst_i_,  _de_d0_, _df_d0_,
> > -	fcompst, _d9_d8_, fcmovu,   fcmovnu,  _dc_d8_, fstp_i,  fcompp,  _df_d8_,
> > -	fsub__, FPU_etc, __BAD__, finit_, fsubri, fucom_, fsubrp, fstsw_,
> > -	fsubr_, fconst,   fucompp,  fucomi_,  fsub_i,  fucomp,  fsubp_,  fucomip,
> > -	fdiv__, FPU_triga, __BAD__, fcomi_,   fdivri,  __BAD__, fdivrp,  fcomip,
> > -	fdivr_, FPU_trigb, __BAD__, __BAD__, fdiv_i, __BAD__, fdivp_, __BAD__,
> > +/* 0x00 */	fadd__,		fld_i_,		fcmovb,		fcmovnb,
> > +/* 0x04 */	fadd_i,		ffree_,		faddp_,		_df_c0_,
> > +/* 0x08 */	fmul__,		fxch_i,		fcmove,		fcmovne,
> > +/* 0x0c */	fmul_i,		_dd_c8_,	fmulp_,		_df_c8_,
> > +/* 0x10 */	fcom_st,	fp_nop,		fcmovbe,	fcmovnbe,
> > +/* 0x14 */	_dc_d0_,	fst_i_,		_de_d0_,	_df_d0_,
> > +/* 0x18 */	fcompst,	_d9_d8_,	fcmovu,		fcmovnu,
> > +/* 0x1c */	_dc_d8_,	fstp_i,		fcompp,		_df_d8_,
> > +/* 0x20 */	fsub__,		FPU_etc,	__BAD__,	finit_,
> > +/* 0x24 */	fsubri,		fucom_,		fsubrp,		fstsw_,
> > +/* 0x28 */	fsubr_,		fconst,		fucompp,	fucomi_,
> > +/* 0x2c */	fsub_i,		fucomp,		fsubp_,		fucomip,
> > +/* 0x30 */	fdiv__,		FPU_triga,	__BAD__,	fcomi_,
> > +/* 0x34 */	fdivri,		__BAD__,	fdivrp,		fcomip,
> > +/* 0x38 */	fdivr_,		FPU_trigb,	__BAD__,	__BAD__,
> > +/* 0x3c */	fdiv_i,		__BAD__,	fdivp_,		__BAD__,
> 
> The numeric comments added at the left don't look correct.

Yeah, so they are correct for the purpose I used it: I simply wanted to index the 
table by its natural index: 'instr_idx', which is derived from the opcode.

But you are right that indexing it by the opcode is more useful for future 
extensions:

> In this table, each _column_ corresponds to one 0xd? opcode.
> Each row corresponds to a group of mod-reg-rm bytes
> with only "rm" field chnaging. (These insns act on registers,
> not memory, and "rm" value encodes register number, st(i).)
> 
> Something like this:
> 
> /*Opcode: d8      d9        da      db       dc      dd      de      df */
> /*c0..7*/ fadd__, fld_i_,   fcmovb, fcmovnb, fadd_i, ffree_, faddp_, _df_c0_,
> /*c8..f*/ fmul__, fxch_i,   fcmove, fcmovne, fmul_i, _dd_c8_,fmulp_, _df_c8_,
> /*d0..7*/ fcom_st,fp_nop,   fcmovbe,fcmovnbe,_dc_d0_,fst_i_, _de_d0_,_df_d0_,
> /*d8..f*/ fcompst,_d9_d8_,  fcmovu, fcmovnu, _dc_d8_,fstp_i, fcompp, _df_d8_,
> /*e0..7*/ fsub__, FPU_etc,  __BAD__,finit_,  fsubri, fucom_, fsubrp, fstsw_,
> /*e8..f*/ fsubr_, fconst,   fucompp,fucomi_, fsub_i, fucomp, fsubp_, fucomip,
> /*f0..7*/ fdiv__, FPU_triga,__BAD__,fcomi_,  fdivri, __BAD__,fdivrp, fcomip,
> /*f8..f*/ fdivr_, FPU_trigb,__BAD__,__BAD__, fdiv_i, __BAD__,fdivp_, __BAD__,

(Assuming you also do the table alignment improvements I did, the current format 
is pretty hard to navigate.)

> 
> 
> They should be:

Hm, your mail seems to have been cut off at this point.

Thanks,

	Ingo