Re: Almost certainly confirmed, sun7i-a20 does not support 8 bit mmc.

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1: Type: text/plain, Size: 2859 bytes --]

On Wed, Sep 09, 2015 at 03:04:11PM +0200, Olliver Schinagl wrote:
> Hey all,
> 
> After experimenting with a Micron eMMC chip, I made some interesting finds I
> wanted to share with you all.
> 
> For a while now, some had hopes or guessed that the A20 could have support
> for 8 bit wide bused on the SDC2. Reason for thinking this was, because the
> sun7i uses the same IP as the sun5i which does support 8 bit wide eMMC. The
> usermanual does mention 1/4/8 bit data buses and jedec 4.3 support of the
> MMC spec. Unfortunately so far, it appears that the extra data pins have not
> been muxed out to the PC pads.
> 
> I used the following code to enable the extra pins on the A20:
>                         mmc2_pins_a: mmc2@0 {
> -                               allwinner,pins = "PC6", "PC7", "PC8",
> -                                                "PC9", "PC10", "PC11";
> +                               allwinner,pins = "PC6", "PC7",
> +                                                "PC8", "PC9", "PC10",
> "PC11",
> +                                                "PC12", "PC13", "PC14",
> "PC15";
> 
> and
>         SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 12),
>                   SUNXI_FUNCTION(0x0, "gpio_in"),
>                   SUNXI_FUNCTION(0x1, "gpio_out"),
> -                 SUNXI_FUNCTION(0x2, "nand0")),        /* NDQ4 */
> +                 SUNXI_FUNCTION(0x2, "nand0"),         /* NDQ4 */
> +                 SUNXI_FUNCTION(0x3, "mmc2")),         /* D4 */
>         SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 13),
>                   SUNXI_FUNCTION(0x0, "gpio_in"),
>                   SUNXI_FUNCTION(0x1, "gpio_out"),
> -                 SUNXI_FUNCTION(0x2, "nand0")),        /* NDQ5 */
> +                 SUNXI_FUNCTION(0x2, "nand0"),         /* NDQ5 */
> +                 SUNXI_FUNCTION(0x3, "mmc2")),         /* D5 */
>         SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 14),
>                   SUNXI_FUNCTION(0x0, "gpio_in"),
>                   SUNXI_FUNCTION(0x1, "gpio_out"),
> -                 SUNXI_FUNCTION(0x2, "nand0")),        /* NDQ6 */
> +                 SUNXI_FUNCTION(0x2, "nand0"),         /* NDQ6 */
> +                 SUNXI_FUNCTION(0x3, "mmc2")),         /* D6 */
>         SUNXI_PIN(SUNXI_PINCTRL_PIN(C, 15),
>                   SUNXI_FUNCTION(0x0, "gpio_in"),
>                   SUNXI_FUNCTION(0x1, "gpio_out"),
> -                 SUNXI_FUNCTION(0x2, "nand0")),        /* NDQ7 */
> +                 SUNXI_FUNCTION(0x2, "nand0"),         /* NDQ7 */
> +                 SUNXI_FUNCTION(0x3, "mmc2")),         /* D7 */

Where did you get that info from ? Those pins have never been reported
as having the mmc2 function, which would explain why it doesn't work.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]