[PATCH 4.1 41/78] sd: Fix maximum I/O size for BLOCK_PC requests

Greg Kroah-Hartman
2015-09-11T22:50:52Z

From: "Martin K. Petersen" <martin.petersen@oracle.com>

commit 4f258a46346c03fa0bbb6199ffaf4e1f9f599660 upstream.

Commit bcdb247c6b6a ("sd: Limit transfer length") clamped the maximum
size of an I/O request to the MAXIMUM TRANSFER LENGTH field in the BLOCK
LIMITS VPD. This had the unfortunate effect of also limiting the maximum
size of non-filesystem requests sent to the device through sg/bsg.

Avoid using blk_queue_max_hw_sectors() and set the max_sectors queue
limit directly.

Also update the comment in blk_limits_max_hw_sectors() to clarify that
max_hw_sectors defines the limit for the I/O controller only.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Brian King <brking@linux.vnet.ibm.com>
Tested-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
block/blk-settings.c | 4 ++--
drivers/scsi/sd.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)

--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -241,8 +241,8 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
* Description:
* Enables a low level driver to set a hard upper limit,
* max_hw_sectors, on the size of requests. max_hw_sectors is set by
- * the device driver based upon the combined capabilities of I/O
- * controller and storage device.
+ * the device driver based upon the capabilities of the I/O
+ * controller.
*
* max_sectors is a soft limit imposed by the block layer for
* filesystem type requests. This value can be overridden on a
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2770,9 +2770,9 @@ static int sd_revalidate_disk(struct gen
max_xfer = sdkp->max_xfer_blocks;
max_xfer <<= ilog2(sdp->sector_size) - 9;

- max_xfer = min_not_zero(queue_max_hw_sectors(sdkp->disk->queue),
- max_xfer);
- blk_queue_max_hw_sectors(sdkp->disk->queue, max_xfer);
+ sdkp->disk->queue->limits.max_sectors =
+ min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
+
set_capacity(disk, sdkp->capacity);
sd_config_write_same(sdkp);
kfree(buffer);