[PATCH] extcon: axp288: Convert to using managed resources

[PATCH] extcon: axp288: Convert to using managed resources

[Vaishali Thakkar]

Use resource managed functions devm_usb_get_phy and
devm_gpio_request to make error path simpler. To be
compatible the change, various gotos are replaced
with direct returns and unnecessary label
gpio_req_failed is dropped.

Also, remove function axp288_extcon_remove as it is
now redundant.

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
---
 drivers/extcon/extcon-axp288.c | 23 +++++------------------
 1 file changed, 5 insertions(+), 18 deletions(-)

diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index ea962bc..9668d6a 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -309,7 +309,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	}
 
 	/* Get otg transceiver phy */
-	info->otg = usb_get_phy(USB_PHY_TYPE_USB2);
+	info->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
 	if (IS_ERR(info->otg)) {
 		dev_err(&pdev->dev, "failed to get otg transceiver\n");
 		return PTR_ERR(info->otg);
@@ -318,11 +318,11 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	/* Set up gpio control for USB Mux */
 	if (info->pdata->gpio_mux_cntl) {
 		gpio = desc_to_gpio(info->pdata->gpio_mux_cntl);
-		ret = gpio_request(gpio, "USB_MUX");
+		ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX");
 		if (ret < 0) {
 			dev_err(&pdev->dev,
 				"failed to request the gpio=%d\n", gpio);
-			goto gpio_req_failed;
+			return ret;
 		}
 		gpiod_direction_output(info->pdata->gpio_mux_cntl,
 						EXTCON_GPIO_MUX_SEL_PMIC);
@@ -335,7 +335,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"failed to get virtual interrupt=%d\n", pirq);
 			ret = info->irq[i];
-			goto gpio_req_failed;
+			return ret;
 		}
 
 		ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
@@ -345,7 +345,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request interrupt=%d\n",
 							info->irq[i]);
-			goto gpio_req_failed;
+			return ret;
 		}
 	}
 
@@ -353,23 +353,10 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	axp288_extcon_enable_irq(info);
 
 	return 0;
-
-gpio_req_failed:
-	usb_put_phy(info->otg);
-	return ret;
-}
-
-static int axp288_extcon_remove(struct platform_device *pdev)
-{
-	struct axp288_extcon_info *info = platform_get_drvdata(pdev);
-
-	usb_put_phy(info->otg);
-	return 0;
 }
 
 static struct platform_driver axp288_extcon_driver = {
 	.probe = axp288_extcon_probe,
-	.remove = axp288_extcon_remove,
 	.driver = {
 		.name = "axp288_extcon",
 	},
-- 
1.9.1

Re: [PATCH] extcon: axp288: Convert to using managed resources

[Chanwoo Choi]

On 2015년 09월 15일 02:49, Vaishali Thakkar wrote:
> Use resource managed functions devm_usb_get_phy and
> devm_gpio_request to make error path simpler. To be
> compatible the change, various gotos are replaced
> with direct returns and unnecessary label
> gpio_req_failed is dropped.
> 
> Also, remove function axp288_extcon_remove as it is
> now redundant.
> 
> Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
> ---
>  drivers/extcon/extcon-axp288.c | 23 +++++------------------
>  1 file changed, 5 insertions(+), 18 deletions(-)

Applied it.

Thanks,
Chanwoo Choi