* [PATCH] compal-laptop: add charge control limit
@ 2015-09-12 20:00 Roald Frederickx
2015-09-18 23:06 ` Darren Hart
0 siblings, 1 reply; 2+ messages in thread
From: Roald Frederickx @ 2015-09-12 20:00 UTC (permalink / raw)
To: platform-driver-x86; +Cc: linux-kernel
Add charge control limit to the power supply subsystem of the Compal
platform driver.
This apparently was present in the original driver by Cezary Jackiewicz
at http://eko.one.pl/index.php?page=compal-laptop but it seems to have been
overlooked.
The Kconfig description is updated to reflect this addition. It now also
mentions the hwmon interface that was already present.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
---
drivers/platform/x86/Kconfig | 4 ++--
drivers/platform/x86/compal-laptop.c | 43 +++++++++++++++++++++++++++++++++++-
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c69bb70..2f9026d 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -309,8 +309,8 @@ config COMPAL_LAPTOP
This is a driver for laptops built by Compal, and some models by
other brands (e.g. Dell, Toshiba).
- It adds support for rfkill, Bluetooth, WLAN and LCD brightness
- control.
+ It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
+ and battery charging level control.
For a (possibly incomplete) list of supported laptops, please refer
to: Documentation/platform/x86-laptop-drivers.txt
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index f2706d2..e1c2b6d 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -151,6 +151,8 @@
#define BAT_STATUS2 0xF1
#define BAT_STOP_CHARGE1 0xF2
#define BAT_STOP_CHARGE2 0xF3
+#define BAT_CHARGE_LIMIT 0x03
+#define BAT_CHARGE_LIMIT_MAX 100
#define BAT_S0_DISCHARGE (1 << 0)
#define BAT_S0_DISCHRG_CRITICAL (1 << 2)
@@ -601,6 +603,12 @@ static int bat_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CHARGE_NOW:
val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ val->intval = BAT_CHARGE_LIMIT_MAX;
+ break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = ec_read_u8(BAT_CAPACITY);
break;
@@ -634,6 +642,36 @@ static int bat_get_property(struct power_supply *psy,
return 0;
}
+static int bat_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ int level;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ level = val->intval;
+ if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
+ return -EINVAL;
+ if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
+ return -EIO;
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int bat_writeable_property(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ return 1;
+ default:
+ return 0;
+ }
+}
@@ -726,6 +764,8 @@ static enum power_supply_property compal_bat_properties[] = {
POWER_SUPPLY_PROP_POWER_NOW,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
@@ -880,11 +920,12 @@ static const struct power_supply_desc psy_bat_desc = {
.properties = compal_bat_properties,
.num_properties = ARRAY_SIZE(compal_bat_properties),
.get_property = bat_get_property,
+ .set_property = bat_set_property,
+ .property_is_writeable = bat_writeable_property,
};
static void initialize_power_supply_data(struct compal_data *data)
{
-
ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
data->bat_manufacturer_name,
BAT_MANUFACTURER_NAME_LEN);
--
1.9.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] compal-laptop: add charge control limit
2015-09-12 20:00 [PATCH] compal-laptop: add charge control limit Roald Frederickx
@ 2015-09-18 23:06 ` Darren Hart
0 siblings, 0 replies; 2+ messages in thread
From: Darren Hart @ 2015-09-18 23:06 UTC (permalink / raw)
To: Roald Frederickx
Cc: platform-driver-x86, linux-kernel, Cezary Jackiewicz,
Andy Whitcroft, Joe Perches
On Sat, Sep 12, 2015 at 10:00:16PM +0200, Roald Frederickx wrote:
> Add charge control limit to the power supply subsystem of the Compal
> platform driver.
> This apparently was present in the original driver by Cezary Jackiewicz
> at http://eko.one.pl/index.php?page=compal-laptop but it seems to have been
> overlooked.
>
> The Kconfig description is updated to reflect this addition. It now also
> mentions the hwmon interface that was already present.
>
Hi Roald,
Please run scripts/get_maintainer.pl -f path/to/files/changed and include all
maintainers and lists to ensure the fastest response.
+ Cezary
+ Andy, Joe
This patch triggered a false positive in checkpatch. This patch does not modify
this line, nor is this line intended to be an email address.
$ scripts/checkpatch.pl ~/incoming/PATCH_compal-laptop_add_charge_control_limit.mbox
WARNING: Do not use whitespace before To:
#56: FILE: drivers/platform/x86/Kconfig:316:
to: Documentation/platform/x86-laptop-drivers.txt
ERROR: Unrecognized email address: 'Documentation/platform/x86-laptop-drivers.txt'
#56: FILE: drivers/platform/x86/Kconfig:316:
to: Documentation/platform/x86-laptop-drivers.txt
total: 1 errors, 1 warnings, 87 lines checked
/home/dvhart/incoming/PATCH_compal-laptop_add_charge_control_limit.mbox has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
> Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
This looks reasonable Roald, queued to testing - pending ack from Cezary.
> ---
> drivers/platform/x86/Kconfig | 4 ++--
> drivers/platform/x86/compal-laptop.c | 43 +++++++++++++++++++++++++++++++++++-
> 2 files changed, 44 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index c69bb70..2f9026d 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -309,8 +309,8 @@ config COMPAL_LAPTOP
> This is a driver for laptops built by Compal, and some models by
> other brands (e.g. Dell, Toshiba).
>
> - It adds support for rfkill, Bluetooth, WLAN and LCD brightness
> - control.
> + It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
> + and battery charging level control.
>
> For a (possibly incomplete) list of supported laptops, please refer
> to: Documentation/platform/x86-laptop-drivers.txt
> diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
> index f2706d2..e1c2b6d 100644
> --- a/drivers/platform/x86/compal-laptop.c
> +++ b/drivers/platform/x86/compal-laptop.c
> @@ -151,6 +151,8 @@
> #define BAT_STATUS2 0xF1
> #define BAT_STOP_CHARGE1 0xF2
> #define BAT_STOP_CHARGE2 0xF3
> +#define BAT_CHARGE_LIMIT 0x03
> +#define BAT_CHARGE_LIMIT_MAX 100
>
> #define BAT_S0_DISCHARGE (1 << 0)
> #define BAT_S0_DISCHRG_CRITICAL (1 << 2)
> @@ -601,6 +603,12 @@ static int bat_get_property(struct power_supply *psy,
> case POWER_SUPPLY_PROP_CHARGE_NOW:
> val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
> break;
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
> + val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
> + val->intval = BAT_CHARGE_LIMIT_MAX;
> + break;
> case POWER_SUPPLY_PROP_CAPACITY:
> val->intval = ec_read_u8(BAT_CAPACITY);
> break;
> @@ -634,6 +642,36 @@ static int bat_get_property(struct power_supply *psy,
> return 0;
> }
>
> +static int bat_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + int level;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
> + level = val->intval;
> + if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
> + return -EINVAL;
> + if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
> + return -EIO;
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +static int bat_writeable_property(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
> + return 1;
> + default:
> + return 0;
> + }
> +}
>
>
>
> @@ -726,6 +764,8 @@ static enum power_supply_property compal_bat_properties[] = {
> POWER_SUPPLY_PROP_POWER_NOW,
> POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> POWER_SUPPLY_PROP_CHARGE_NOW,
> + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
> + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
> POWER_SUPPLY_PROP_CAPACITY,
> POWER_SUPPLY_PROP_CAPACITY_LEVEL,
> POWER_SUPPLY_PROP_TEMP,
> @@ -880,11 +920,12 @@ static const struct power_supply_desc psy_bat_desc = {
> .properties = compal_bat_properties,
> .num_properties = ARRAY_SIZE(compal_bat_properties),
> .get_property = bat_get_property,
> + .set_property = bat_set_property,
> + .property_is_writeable = bat_writeable_property,
> };
>
> static void initialize_power_supply_data(struct compal_data *data)
> {
> -
> ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
> data->bat_manufacturer_name,
> BAT_MANUFACTURER_NAME_LEN);
> --
> 1.9.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Darren Hart
Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-09-18 23:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-12 20:00 [PATCH] compal-laptop: add charge control limit Roald Frederickx
2015-09-18 23:06 ` Darren Hart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox