Re: [PATCH] drm: atmel-hlcdc: add support for sama5d2 SoCs

[Boris Brezillon <boris.brezillon@free-electrons.com>]

Hi Nicolas,

Sorry for the late reply.

On Wed, 9 Sep 2015 15:47:15 +0200
Nicolas Ferre <nicolas.ferre@atmel.com> wrote:

> As the hardware description for this chip is the same as the sama5d4, we use
> this SoC structures for layers and DC descriptions. Thus only 2 lines are added
> to the atmel_hlcdc_of_match table.
> The compatible string is already documented in the parent MFD driver's binding.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Just for the record, since Thierry already applied it in his tree:

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> ---
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> index 8bc62ec407f9..498add1e5e58 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> @@ -333,6 +333,10 @@ static const struct of_device_id atmel_hlcdc_of_match[] = {
>  		.data = &atmel_hlcdc_dc_at91sam9x5,
>  	},
>  	{
> +		.compatible = "atmel,sama5d2-hlcdc",
> +		.data = &atmel_hlcdc_dc_sama5d4,
> +	},
> +	{
>  		.compatible = "atmel,sama5d3-hlcdc",
>  		.data = &atmel_hlcdc_dc_sama5d3,
>  	},



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com