From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752490AbbJMJYB (ORCPT ); Tue, 13 Oct 2015 05:24:01 -0400 Received: from mail-wi0-f173.google.com ([209.85.212.173]:34346 "EHLO mail-wi0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751329AbbJMJX7 (ORCPT ); Tue, 13 Oct 2015 05:23:59 -0400 Date: Tue, 13 Oct 2015 10:23:55 +0100 From: Lee Jones To: Charles Keepax Cc: patches@opensource.wolfsonmicro.com, linux-kernel@vger.kernel.org, rf@opensource.wolfsonmicro.com, sameo@linux.intel.com Subject: Re: [PATCH v2 1/6] mfd: arizona: factor out DCVDD isolation control Message-ID: <20151013092355.GM32409@x1> References: <1443788955-7523-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1443788955-7523-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, 02 Oct 2015, Charles Keepax wrote: > From: Richard Fitzgerald > > Currently DCVDD isolation is enabled and disabled for > runtime_suspend and runtime_resume. Future codecs will not > have the isolation control so to prepare for these codecs > this patch factors out the isolation control allowing it to > be called as needed in the existing codec-specific switch cases. > > Signed-off-by: Richard Fitzgerald > Acked-by: Lee Jones > Signed-off-by: Charles Keepax > --- > drivers/mfd/arizona-core.c | 108 +++++++++++++++++++++++++------------------- > 1 files changed, 62 insertions(+), 46 deletions(-) Applied, thanks. > diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c > index acf3548..29be262 100644 > --- a/drivers/mfd/arizona-core.c > +++ b/drivers/mfd/arizona-core.c > @@ -460,6 +460,33 @@ static int wm5102_clear_write_sequencer(struct arizona *arizona) > } > > #ifdef CONFIG_PM > +static int arizona_isolate_dcvdd(struct arizona *arizona) > +{ > + int ret; > + > + ret = regmap_update_bits(arizona->regmap, > + ARIZONA_ISOLATION_CONTROL, > + ARIZONA_ISOLATE_DCVDD1, > + ARIZONA_ISOLATE_DCVDD1); > + if (ret != 0) > + dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n", ret); > + > + return ret; > +} > + > +static int arizona_connect_dcvdd(struct arizona *arizona) > +{ > + int ret; > + > + ret = regmap_update_bits(arizona->regmap, > + ARIZONA_ISOLATION_CONTROL, > + ARIZONA_ISOLATE_DCVDD1, 0); > + if (ret != 0) > + dev_err(arizona->dev, "Failed to connect DCVDD: %d\n", ret); > + > + return ret; > +} > + > static int arizona_runtime_resume(struct device *dev) > { > struct arizona *arizona = dev_get_drvdata(dev); > @@ -499,14 +526,9 @@ static int arizona_runtime_resume(struct device *dev) > switch (arizona->type) { > case WM5102: > if (arizona->external_dcvdd) { > - ret = regmap_update_bits(arizona->regmap, > - ARIZONA_ISOLATION_CONTROL, > - ARIZONA_ISOLATE_DCVDD1, 0); > - if (ret != 0) { > - dev_err(arizona->dev, > - "Failed to connect DCVDD: %d\n", ret); > + ret = arizona_connect_dcvdd(arizona); > + if (ret != 0) > goto err; > - } > } > > ret = wm5102_patch(arizona); > @@ -531,14 +553,9 @@ static int arizona_runtime_resume(struct device *dev) > goto err; > > if (arizona->external_dcvdd) { > - ret = regmap_update_bits(arizona->regmap, > - ARIZONA_ISOLATION_CONTROL, > - ARIZONA_ISOLATE_DCVDD1, 0); > - if (ret) { > - dev_err(arizona->dev, > - "Failed to connect DCVDD: %d\n", ret); > + ret = arizona_connect_dcvdd(arizona); > + if (ret != 0) > goto err; > - } > } else { > /* > * As this is only called for the internal regulator > @@ -569,14 +586,9 @@ static int arizona_runtime_resume(struct device *dev) > goto err; > > if (arizona->external_dcvdd) { > - ret = regmap_update_bits(arizona->regmap, > - ARIZONA_ISOLATION_CONTROL, > - ARIZONA_ISOLATE_DCVDD1, 0); > - if (ret != 0) { > - dev_err(arizona->dev, > - "Failed to connect DCVDD: %d\n", ret); > + ret = arizona_connect_dcvdd(arizona); > + if (ret != 0) > goto err; > - } > } > break; > } > @@ -609,37 +621,36 @@ static int arizona_runtime_suspend(struct device *dev) > return ret; > } > > - if (arizona->external_dcvdd) { > - ret = regmap_update_bits(arizona->regmap, > - ARIZONA_ISOLATION_CONTROL, > - ARIZONA_ISOLATE_DCVDD1, > - ARIZONA_ISOLATE_DCVDD1); > - if (ret != 0) { > - dev_err(arizona->dev, "Failed to isolate DCVDD: %d\n", > - ret); > - return ret; > - } > - } > - > switch (arizona->type) { > case WM5110: > case WM8280: > - if (arizona->external_dcvdd) > - break; > - > - /* > - * As this is only called for the internal regulator > - * (where we know voltage ranges available) it is ok > - * to request an exact range. > - */ > - ret = regulator_set_voltage(arizona->dcvdd, 1175000, 1175000); > - if (ret < 0) { > - dev_err(arizona->dev, > - "Failed to set suspend voltage: %d\n", ret); > - return ret; > + if (arizona->external_dcvdd) { > + ret = arizona_isolate_dcvdd(arizona); > + if (ret != 0) > + return ret; > + } else { > + /* > + * As this is only called for the internal regulator > + * (where we know voltage ranges available) it is ok > + * to request an exact range. > + */ > + ret = regulator_set_voltage(arizona->dcvdd, > + 1175000, 1175000); > + if (ret < 0) { > + dev_err(arizona->dev, > + "Failed to set suspend voltage: %d\n", > + ret); > + return ret; > + } > } > break; > case WM5102: > + if (arizona->external_dcvdd) { > + ret = arizona_isolate_dcvdd(arizona); > + if (ret != 0) > + return ret; > + } > + > if (!(val & ARIZONA_JD1_ENA)) { > ret = regmap_write(arizona->regmap, > ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0); > @@ -652,6 +663,11 @@ static int arizona_runtime_suspend(struct device *dev) > } > break; > default: > + if (arizona->external_dcvdd) { > + ret = arizona_isolate_dcvdd(arizona); > + if (ret != 0) > + return ret; > + } > break; > } > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog