[patch 0/3] irqchip/mxs: Add support for ASM9260 interrupt controller

[patch 0/3] irqchip/mxs: Add support for ASM9260 interrupt controller

[Thomas Gleixner]

I'm reposting this series from Oleksij before I apply it to give Shawn
and Sascha an opportunity to review and test it on imx.

I moved the irqdomain panic part of Oleksij's patch 2 to patch 1
because it clearly belongs there. Other than that I merily massaged
the changelogs a bit.

Timely feedback would be appreciated so the lot can bake in next.

Thanks,

	tglx

[patch 1/3] irqchip/mxs: Panic if ioremap or domain creation fails

[Thomas Gleixner]

[-- Attachment #1: arm-irqchip-mxs-do-panic-if-icoll_base-3d-3d-null.patch --]
[-- Type: text/plain, Size: 1519 bytes --]

From: Oleksij Rempel <linux@rempel-privat.de>

Current code will only warn and then dereference the NULL pointer or
continue, which results in a fatal NULL pointer dereference later.

If the initialization fails, the machine is unusable, so panic right
away.

[ tglx: Massaged changelog and picked the irqdomain panic from the
  	next patch]

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-2-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-mxs.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Index: tip/drivers/irqchip/irq-mxs.c
===================================================================
--- tip.orig/drivers/irqchip/irq-mxs.c
+++ tip/drivers/irqchip/irq-mxs.c
@@ -97,7 +97,8 @@ static int __init icoll_of_init(struct d
 			  struct device_node *interrupt_parent)
 {
 	icoll_base = of_iomap(np, 0);
-	WARN_ON(!icoll_base);
+	if (!icoll_base)
+		panic("%s: unable to map resource", np->full_name);
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -107,6 +108,9 @@ static int __init icoll_of_init(struct d
 
 	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
 					     &icoll_irq_domain_ops, NULL);
-	return icoll_domain ? 0 : -ENODEV;
+	if (!icoll_domain)
+		panic("%s: unable to create irqdomain", np->full_name);
+
+	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);

[patch 2/3] irqchip/mxs: Prepare driver for hardware with different offsets

[Thomas Gleixner]

[-- Attachment #1: arm-irqchip-mxs-prepare-driver-for-hw-with-different-offsets.patch --]
[-- Type: text/plain, Size: 5209 bytes --]

From: Oleksij Rempel <linux@rempel-privat.de>

Alphascale asm9260 has similar functionality but different register
offsets. To support asm9260 in the mxs driver we need to rework the
hardcoded access mechanisms.

- Define SET_REG and CLR_REG. These controllers support seperate CLR and
  SET offsets for each register.

- Reimplement HW_ICOLL_INTERRUPT with SET_REG and CLR_REG to make it
  usable for both cases.

- Instead of using icoll_base and adding the offsets at runtime,
  create a new data structure which contains base pointers to all
  required regitsters and use it.

- Split out functionality, which is required for the init code of mxs
  and asm9260, into helper functions

[ tglx: Massaged changelog and moved the return value change to the
  	previous patch ]

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-5-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-mxs.c |   78 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 59 insertions(+), 19 deletions(-)

Index: tip/drivers/irqchip/irq-mxs.c
===================================================================
--- tip.orig/drivers/irqchip/irq-mxs.c
+++ tip/drivers/irqchip/irq-mxs.c
@@ -28,18 +28,36 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
 #define HW_ICOLL_CTRL				0x0020
 #define HW_ICOLL_STAT_OFFSET			0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base;
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+};
+
+static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -50,19 +68,19 @@ static void icoll_ack_irq(struct irq_dat
 	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
 	 */
 	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
+			icoll_priv.levelack);
 }
 
 static void icoll_mask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static void icoll_unmask_irq(struct irq_data *d)
 {
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
 static struct irq_chip mxs_icoll_chip = {
@@ -75,8 +93,8 @@ asmlinkage void __exception_irq_entry ic
 {
 	u32 irqnr;
 
-	irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
-	__raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
 	handle_domain_irq(icoll_domain, irqnr, regs);
 }
 
@@ -93,23 +111,45 @@ static const struct irq_domain_ops icoll
 	.xlate = irq_domain_xlate_onecell,
 };
 
-static int __init icoll_of_init(struct device_node *np,
-			  struct device_node *interrupt_parent)
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%s: unable to create irq domain", np->full_name);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
 {
-	icoll_base = of_iomap(np, 0);
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
 	if (!icoll_base)
 		panic("%s: unable to map resource", np->full_name);
+	return icoll_base;
+}
+
+static int __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_priv.ctrl);
 
-	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
-					     &icoll_irq_domain_ops, NULL);
-	if (!icoll_domain)
-		panic("%s: unable to create irqdomain", np->full_name);
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
 
 	return 0;
 }

[patch 3/3] irqchip/mxs: Add Alphascale ASM9260 support

[Thomas Gleixner]

[-- Attachment #1: arm-irqchip-mxs-add-alphascale-asm9260-support.patch --]
[-- Type: text/plain, Size: 10853 bytes --]

From: Oleksij Rempel <linux@rempel-privat.de>

Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt
collectors. We already prepared the mxs driver to handle a different
register layout. Add the actual ASM9260 support.

Differences between these devices:
- Different register offsets
- Different count of interupt lines per register
- ASM9260 does not provide reset bit
- ASM9260 does not support FIQ.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/Kconfig                    |    5 +
 drivers/irqchip/Makefile                   |    2 
 drivers/irqchip/alphascale_asm9260-icoll.h |  109 +++++++++++++++++++++++++++++
 drivers/irqchip/irq-mxs.c                  |   93 ++++++++++++++++++++++++
 4 files changed, 207 insertions(+), 2 deletions(-)
 create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h

Index: tip/drivers/irqchip/Kconfig
===================================================================
--- tip.orig/drivers/irqchip/Kconfig
+++ tip/drivers/irqchip/Kconfig
@@ -188,3 +188,8 @@ config IMX_GPCV2
 	select IRQ_DOMAIN
 	help
 	  Enables the wakeup IRQs for IMX platforms with GPCv2 block
+
+config IRQ_MXS
+	def_bool y if MACH_ASM9260 || ARCH_MXS
+	select IRQ_DOMAIN
+	select STMP_DEVICE
Index: tip/drivers/irqchip/Makefile
===================================================================
--- tip.orig/drivers/irqchip/Makefile
+++ tip/drivers/irqchip/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-com
 obj-$(CONFIG_ARCH_HIP04)		+= irq-hip04.o
 obj-$(CONFIG_ARCH_MMP)			+= irq-mmp.o
 obj-$(CONFIG_ARCH_MVEBU)		+= irq-armada-370-xp.o
-obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
+obj-$(CONFIG_IRQ_MXS)			+= irq-mxs.o
 obj-$(CONFIG_ARCH_TEGRA)		+= irq-tegra.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= irq-s3c24xx.o
 obj-$(CONFIG_DW_APB_ICTL)		+= irq-dw-apb-ictl.o
Index: tip/drivers/irqchip/alphascale_asm9260-icoll.h
===================================================================
--- /dev/null
+++ tip/drivers/irqchip/alphascale_asm9260-icoll.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ALPHASCALE_ASM9260_ICOLL_H
+#define _ALPHASCALE_ASM9260_ICOLL_H
+
+#define ASM9260_NUM_IRQS		64
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+
+#define ASM9260_HW_ICOLL_VECTOR				0x0000
+/*
+ * bits 31:2
+ * This register presents the vector address for the interrupt currently
+ * active on the CPU IRQ input. Writing to this register notifies the
+ * interrupt collector that the interrupt service routine for the current
+ * interrupt has been entered.
+ * The exception trap should have a LDPC instruction from this address:
+ * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018
+ */
+
+/*
+ * The Interrupt Collector Level Acknowledge Register is used by software to
+ * indicate the completion of an interrupt on a specific level.
+ * This register is written at the very end of an interrupt service routine. If
+ * nesting is used then the CPU irq must be turned on before writing to this
+ * register to avoid a race condition in the CPU interrupt hardware.
+ */
+#define ASM9260_HW_ICOLL_LEVELACK			0x0010
+#define ASM9260_BM_LEVELn(nr)				BIT(nr)
+
+#define ASM9260_HW_ICOLL_CTRL				0x0020
+/*
+ * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on
+ * asm9260.
+ */
+#define ASM9260_BM_CTRL_SFTRST				BIT(31)
+#define ASM9260_BM_CTRL_CLKGATE				BIT(30)
+/* disable interrupt level nesting */
+#define ASM9260_BM_CTRL_NO_NESTING			BIT(19)
+/*
+ * Set this bit to one enable the RISC32-style read side effect associated with
+ * the vector address register. In this mode, interrupt in-service is signaled
+ * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt
+ * vector address. Set this bit to zero for normal operation, in which the ISR
+ * signals in-service explicitly by means of a write to the
+ * ASM9260_HW_ICOLL_VECTOR register.
+ * 0 - Must Write to Vector register to go in-service.
+ * 1 - Go in-service as a read side effect
+ */
+#define ASM9260_BM_CTRL_ARM_RSE_MODE			BIT(18)
+#define ASM9260_BM_CTRL_IRQ_ENABLE			BIT(16)
+
+#define ASM9260_HW_ICOLL_STAT_OFFSET			0x0030
+/*
+ * bits 5:0
+ * Vector number of current interrupt. Multiply by 4 and add to vector base
+ * address to obtain the value in ASM9260_HW_ICOLL_VECTOR.
+ */
+
+/*
+ * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines
+ * coming from various parts of the chip. Its purpose is to improve diagnostic
+ * observability.
+ */
+#define ASM9260_HW_ICOLL_RAW0				0x0040
+#define ASM9260_HW_ICOLL_RAW1				0x0050
+
+#define ASM9260_HW_ICOLL_INTERRUPT0			0x0060
+#define ASM9260_HW_ICOLL_INTERRUPTn(n)		(0x0060 + ((n) >> 2) * 0x10)
+/*
+ * WARNING: Modifying the priority of an enabled interrupt may result in
+ * undefined behavior.
+ */
+#define ASM9260_BM_INT_PRIORITY_MASK			0x3
+#define ASM9260_BM_INT_ENABLE				BIT(2)
+#define ASM9260_BM_INT_SOFTIRQ				BIT(3)
+
+#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)		(((n) & 0x3) << 3)
+#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n)		(1 << (2 + \
+			ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n)))
+
+#define ASM9260_HW_ICOLL_VBASE				0x0160
+/*
+ * bits 31:2
+ * This bitfield holds the upper 30 bits of the base address of the vector
+ * table.
+ */
+
+#define ASM9260_HW_ICOLL_CLEAR0				0x01d0
+#define ASM9260_HW_ICOLL_CLEAR1				0x01e0
+#define ASM9260_HW_ICOLL_CLEARn(n)			(((n >> 5) * 0x10) \
+							+ SET_REG)
+#define ASM9260_BM_CLEAR_BIT(n)				BIT(n & 0x1f)
+
+/* Scratchpad */
+#define ASM9260_HW_ICOLL_UNDEF_VECTOR			0x01f0
+#endif
Index: tip/drivers/irqchip/irq-mxs.c
===================================================================
--- tip.orig/drivers/irqchip/irq-mxs.c
+++ tip/drivers/irqchip/irq-mxs.c
@@ -1,5 +1,7 @@
 /*
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,6 +30,8 @@
 #include <linux/stmp_device.h>
 #include <asm/exception.h>
 
+#include "alphascale_asm9260-icoll.h"
+
 /*
  * this device provide 4 offsets for each register:
  * 0x0 - plain read write mode
@@ -49,17 +53,41 @@
 
 #define ICOLL_NUM_IRQS		128
 
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
 struct icoll_priv {
 	void __iomem *vector;
 	void __iomem *levelack;
 	void __iomem *ctrl;
 	void __iomem *stat;
 	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
 };
 
 static struct icoll_priv icoll_priv;
 static struct irq_domain *icoll_domain;
 
+/* calculate bit offset depending on number of intterupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of intterupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
 static void icoll_ack_irq(struct irq_data *d)
 {
 	/*
@@ -83,12 +111,34 @@ static void icoll_unmask_irq(struct irq_
 			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
 }
 
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
 static struct irq_chip mxs_icoll_chip = {
 	.irq_ack = icoll_ack_irq,
 	.irq_mask = icoll_mask_irq,
 	.irq_unmask = icoll_unmask_irq,
 };
 
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+};
+
 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
 {
 	u32 irqnr;
@@ -101,7 +151,14 @@ asmlinkage void __exception_irq_entry ic
 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hw)
 {
-	irq_set_chip_and_handler(virq, &mxs_icoll_chip, handle_level_irq);
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
 
 	return 0;
 }
@@ -136,12 +193,15 @@ static int __init icoll_of_init(struct d
 {
 	void __iomem *icoll_base;
 
+	icoll_priv.type = ICOLL;
+
 	icoll_base		= icoll_init_iobase(np);
 	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
 	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
 	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
 	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
 	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
 
 	/*
 	 * Interrupt Collector reset, which initializes the priority
@@ -154,3 +214,34 @@ static int __init icoll_of_init(struct d
 	return 0;
 }
 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+
+	return 0;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);

Re: [patch 0/3] irqchip/mxs: Add support for ASM9260 interrupt controller

[Shawn Guo]

On Tue, Oct 13, 2015 at 05:58:53PM -0000, Thomas Gleixner wrote:
> I'm reposting this series from Oleksij before I apply it to give Shawn
> and Sascha an opportunity to review and test it on imx.

I tested the series on imx28-evk board with v4.3-rc5, and it works fine.

Tested-by: Shawn Guo <shawnguo@kernel.org>