[PATCH RESEND 0/4] Staging: rtl8712: Fix coding style warnings

[PATCH RESEND 0/4] Staging: rtl8712: Fix coding style warnings

[Punit Vara]

This set of patch fixes following warnings reported by checkpatch.pl:

-Prefer eth_broadcast_addr() over memset()
-Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()
-Block comments use * on subsequent lines
-Block comments use a trailing */ on a separate line
-Comparisons should place the constant on the right side of the test

v2: Fixed API suggested by : Larry Finger  Larry.Finger@lwfinger.net
    Improved patch description suggested by Julia Julia.Lawall@lip6.fr
Punit Vara (4):
  Staging: rtl8712: Fix warning prefer eth_broadcast_addr() over
    memset()
  Staging: rtl8712: Use ether_addr_equal() over memcmp()
  Staging: rtl8712: Coding style warnings fix for block comments
  Staging: rtl8712: fix warning for placing constant on the right side
    of     test

 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 47 ++++++++++++++-------------
 1 file changed, 25 insertions(+), 22 deletions(-)

--
2.5.3

[PATCH RESEND 1/4] Staging: rtl8712: Fix warning prefer eth_broadcast_addr() over memset()

[Punit Vara]

This patch is to the rtl871x_ioctl_linux.c that fixes up following
warning by checkpatch.pl:

-Prefer eth_broadcast_addr() over memset()

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index 143be0f..2ba055d 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -1811,8 +1811,7 @@ static int r871x_wx_set_enc_ext(struct net_device *dev,
 	if (param == NULL)
 		return -ENOMEM;
 	param->cmd = IEEE_CMD_SET_ENCRYPTION;
-	memset(param->sta_addr, 0xff, ETH_ALEN);
-
+	eth_broadcast_addr(param->sta_addr);
 	strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
 	if (pext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
 		param->u.crypt.set_tx = 0;
-- 
2.5.3

[PATCH v2 2/4] Staging: rtl8712: Use ether_addr_equal() over memcmp()

[Punit Vara]

This patch is to the rtl871x_ioctl_linux.c file that fixes up following
warning reported by checkpatch.pl :

-Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()

bssid and pnetwork->network.MacAddress both are 6 byte
array which aligned with u16

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index 143be0f..b19556a 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -2008,7 +2008,7 @@ static int r871x_get_ap_info(struct net_device *dev,
 			return -EINVAL;
 		}
 		netdev_info(dev, "r8712u: BSSID:%pM\n", bssid);
-		if (!memcmp(bssid, pnetwork->network.MacAddress, ETH_ALEN)) {
+		if (ether_addr_equal(bssid, pnetwork->network.MacAddress)) {
 			/* BSSID match, then check if supporting wpa/wpa2 */
 			pbuf = r8712_get_wpa_ie(&pnetwork->network.IEs[12],
 			       &wpa_ielen, pnetwork->network.IELength-12);
-- 
2.5.3

[PATCH RESEND 3/4] Staging: rtl8712: Coding style warnings fix for block comments

[Punit Vara]

This patch is to the rtl871x_ioctl_linux.c file that fixes up following
warnings reported by checkpatch.pl :

-Block comments use * on subsequent lines
-Block comments use a trailing */ on a separate line

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index 1c9092e..fc1028a 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -797,13 +797,13 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 	int intReturn = false;
 
 /*
-	There are the BSSID information in the bssid.sa_data array.
-	If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
-	all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
-	wpa_supplicant wants to add a PMKID/BSSID to driver.
-	If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
-	remove a PMKID/BSSID from driver.
-*/
+ *	There are the BSSID information in the bssid.sa_data array.
+ *	If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
+ *	all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
+ *	wpa_supplicant wants to add a PMKID/BSSID to driver.
+ *	If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
+ *	remove a PMKID/BSSID from driver.
+ */
 	if (pPMK == NULL)
 		return -EINVAL;
 	memcpy(strIssueBssid, pPMK->bssid.sa_data, ETH_ALEN);
@@ -818,7 +818,8 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 			if (!memcmp(psecuritypriv->PMKIDList[j].Bssid,
 			    strIssueBssid, ETH_ALEN)) {
 				/* BSSID is matched, the same AP => rewrite
-				 * with new PMKID. */
+				 * with new PMKID.
+				 */
 				netdev_info(dev, "r8712u: %s: BSSID exists in the PMKList.\n",
 					    __func__);
 				memcpy(psecuritypriv->PMKIDList[j].PMKID,
@@ -850,7 +851,8 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 			if (!memcmp(psecuritypriv->PMKIDList[j].Bssid,
 			    strIssueBssid, ETH_ALEN)) {
 				/* BSSID is matched, the same AP => Remove
-				 * this PMKID information and reset it. */
+				 * this PMKID information and reset it.
+				 */
 				eth_zero_addr(psecuritypriv->PMKIDList[j].Bssid);
 				psecuritypriv->PMKIDList[j].bUsed = false;
 				break;
@@ -1587,7 +1589,8 @@ static int r8711_wx_set_enc(struct net_device *dev,
 	} else {
 		wep.KeyLength = 0;
 		if (keyindex_provided == 1) { /* set key_id only, no given
-					       * KeyMaterial(erq->length==0).*/
+					       * KeyMaterial(erq->length==0).
+					       */
 			padapter->securitypriv.PrivacyKeyIndex = key;
 			switch (padapter->securitypriv.DefKeylen[key]) {
 			case 5:
@@ -2240,7 +2243,8 @@ static iw_handler r8711_handlers[] = {
 	r8711_wx_set_wap,		/* SIOCSIWAP */
 	r8711_wx_get_wap,		/* SIOCGIWAP */
 	r871x_wx_set_mlme,		/* request MLME operation;
-					 *  uses struct iw_mlme */
+					 *  uses struct iw_mlme
+					 */
 	dummy,				/* SIOCGIWAPLIST -- deprecated */
 	r8711_wx_set_scan,		/* SIOCSIWSCAN */
 	r8711_wx_get_scan,		/* SIOCGIWSCAN */
-- 
2.5.3

[PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Punit Vara]

Put constant on the right side of a test.Problem found using checkpatch: 

Warning:Comparisons should place the constant on the right side of the test

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index fc1028a..e9852ae 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -959,7 +959,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
 	if (IS_ERR(ext))
 		return PTR_ERR(ext);
 
-	if (0 == strcasecmp(ext, "RSSI")) {
+	if (strcasecmp(ext, "RSSI") == 0) {
 		/*Return received signal strength indicator in -db for */
 		/* current AP */
 		/*<ssid> Rssi xx */
@@ -976,7 +976,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
 		} else {
 			sprintf(ext, "OK");
 		}
-	} else if (0 == strcasecmp(ext, "LINKSPEED")) {
+	} else if (strcasecmp(ext, "LINKSPEED") == 0) {
 		/*Return link speed in MBPS */
 		/*LinkSpeed xx */
 		union iwreq_data wrqd;
@@ -984,30 +984,30 @@ static int r871x_wx_set_priv(struct net_device *dev,
 		int mbps;
 
 		ret_inner = r8711_wx_get_rate(dev, info, &wrqd, extra);
-		if (0 != ret_inner)
+		if (ret_inner != 0)
 			mbps = 0;
 		else
 			mbps = wrqd.bitrate.value / 1000000;
 		sprintf(ext, "LINKSPEED %d", mbps);
-	} else if (0 == strcasecmp(ext, "MACADDR")) {
+	} else if (strcasecmp(ext, "MACADDR") == 0) {
 		/*Return mac address of the station */
 		/* Macaddr = xx:xx:xx:xx:xx:xx */
 		sprintf(ext, "MACADDR = %pM", dev->dev_addr);
-	} else if (0 == strcasecmp(ext, "SCAN-ACTIVE")) {
+	} else if (strcasecmp(ext, "SCAN-ACTIVE") == 0) {
 		/*Set scan type to active */
 		/*OK if successful */
 		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
 		pmlmepriv->passive_mode = 1;
 		sprintf(ext, "OK");
-	} else if (0 == strcasecmp(ext, "SCAN-PASSIVE")) {
+	} else if (strcasecmp(ext, "SCAN-PASSIVE") == 0) {
 		/*Set scan type to passive */
 		/*OK if successful */
 		struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
 		pmlmepriv->passive_mode = 0;
 		sprintf(ext, "OK");
-	} else if (0 == strncmp(ext, "DCE-E", 5)) {
+	} else if (strncmp(ext, "DCE-E", 5) == 0) {
 		/*Set scan type to passive */
 		/*OK if successful */
 		r8712_disconnectCtrlEx_cmd(padapter
@@ -1017,7 +1017,7 @@ static int r871x_wx_set_priv(struct net_device *dev,
 			, 5000 /*u32 firstStageTO */
 		);
 		sprintf(ext, "OK");
-	} else if (0 == strncmp(ext, "DCE-D", 5)) {
+	} else if (strncmp(ext, "DCE-D", 5) == 0) {
 		/*Set scan type to passive */
 		/*OK if successfu */
 		r8712_disconnectCtrlEx_cmd(padapter
-- 
2.5.3

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Greg KH]

On Wed, Oct 14, 2015 at 11:55:55PM +0530, Punit Vara wrote:
> Put constant on the right side of a test.Problem found using checkpatch: 
> 
> Warning:Comparisons should place the constant on the right side of the test
> 
> Signed-off-by: Punit Vara <punitvara@gmail.com>
> ---
>  drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)

Didn't apply to my tree :(

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[punit vara]

On Sat, Oct 17, 2015 at 10:46 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> On Wed, Oct 14, 2015 at 11:55:55PM +0530, Punit Vara wrote:
>> Put constant on the right side of a test.Problem found using checkpatch:
>>
>> Warning:Comparisons should place the constant on the right side of the test
>>
>> Signed-off-by: Punit Vara <punitvara@gmail.com>
>> ---
>>  drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
>>  1 file changed, 8 insertions(+), 8 deletions(-)
>
> Didn't apply to my tree :(
In this case what should I do ? Should I do git reset , git pull and
then  do changes on latest tree ?

One more thing I would like suggestion how can start switching this
driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
? Simultaneously I am trying to understand the flow of driver . I
would like to know the start point  from where I can start doing small
changes.

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Tillmann Heidsieck]

Hi,

On 2015-10-18 08:32, punit vara wrote:
> On Sat, Oct 17, 2015 at 10:46 AM, Greg KH <gregkh@linuxfoundation.org> 
> wrote:
>> On Wed, Oct 14, 2015 at 11:55:55PM +0530, Punit Vara wrote:
>>> Put constant on the right side of a test.Problem found using 
>>> checkpatch:
>>> 
>>> Warning:Comparisons should place the constant on the right side of 
>>> the test
>>> 
>>> Signed-off-by: Punit Vara <punitvara@gmail.com>
>>> ---
>>>  drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
>>>  1 file changed, 8 insertions(+), 8 deletions(-)
>> 
>> Didn't apply to my tree :(
> In this case what should I do ? Should I do git reset , git pull and
> then  do changes on latest tree ?
> 

Greg is probably trying to apply this series to the staging-next branch 
of his staging tree[0]
so you need to clone that one, or add it as an additional remote[1] to 
your clone of the kernel tree (much better option IMHO). After this you 
need to rebase[2] your changes onto the stating-next branch, fix up all 
conflicts in your code, and resend the patch.

I hope this helps

Tillmann

[0] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
[1] https://git-scm.com/book/en/v2/Git-Basics-Working-with-Remotes
[2] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Tillmann Heidsieck]

On Sun, Oct 18, 2015 at 08:54:57PM +0200, Tillmann Heidsieck wrote:
> Hi,

[...]

> Greg is probably trying to apply this series to the staging-next branch of
> his staging tree[0]
> so you need to clone that one, or add it as an additional remote[1] to your
> clone of the kernel tree (much better option IMHO). After this you need to
> rebase[2] your changes onto the stating-next branch, fix up all conflicts in
> your code, and resend the patch.
> 
> I hope this helps
> 
> Tillmann
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
> [1] https://git-scm.com/book/en/v2/Git-Basics-Working-with-Remotes
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git

ups, got bitten by my missing c'n'p prowess 
[2] https://www.kernel.org/pub/software/scm/git/docs/git-rebase.html

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Greg KH]

On Sun, Oct 18, 2015 at 12:02:53PM +0530, punit vara wrote:
> On Sat, Oct 17, 2015 at 10:46 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> > On Wed, Oct 14, 2015 at 11:55:55PM +0530, Punit Vara wrote:
> >> Put constant on the right side of a test.Problem found using checkpatch:
> >>
> >> Warning:Comparisons should place the constant on the right side of the test
> >>
> >> Signed-off-by: Punit Vara <punitvara@gmail.com>
> >> ---
> >>  drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 16 ++++++++--------
> >>  1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > Didn't apply to my tree :(
> In this case what should I do ? Should I do git reset , git pull and
> then  do changes on latest tree ?

That depends on your workflow, how about pulling and then rebase your
branch on mine?  That's the easiest workflow to use.

> One more thing I would like suggestion how can start switching this
> driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
> ? Simultaneously I am trying to understand the flow of driver . I
> would like to know the start point  from where I can start doing small
> changes.

If you don't understand the wireless stack, I suggest you do some
research on it first, converting a driver to the in-kernel stack is a
_very_ difficult thing and not something that someone without any
experience in this area is going to be able to do easily.

good luck!

greg k-h

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Larry Finger]

On 10/18/2015 09:00 PM, Greg KH wrote:
> On Sun, Oct 18, 2015 at 12:02:53PM +0530, punit vara wrote:
>> One more thing I would like suggestion how can start switching this
>> driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
>> ? Simultaneously I am trying to understand the flow of driver . I
>> would like to know the start point  from where I can start doing small
>> changes.
>
> If you don't understand the wireless stack, I suggest you do some
> research on it first, converting a driver to the in-kernel stack is a
> _very_ difficult thing and not something that someone without any
> experience in this area is going to be able to do easily.

I second this suggestion. Your skill level is not nearly sufficient for this 
sort of task. Note that there is a group working on driver rtl8192su, which 
should be able to replace rtl8712u. The participants are very highly skilled 
wireless developers; however, they are having trouble. The internals of the 
Realtek chips are not revealed to anyone in any form other than the code they 
release.

Larry

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[punit vara]

On Mon, Oct 19, 2015 at 8:14 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> On 10/18/2015 09:00 PM, Greg KH wrote:
>>
>> On Sun, Oct 18, 2015 at 12:02:53PM +0530, punit vara wrote:
>>>
>>> One more thing I would like suggestion how can start switching this
>>> driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
>>> ? Simultaneously I am trying to understand the flow of driver . I
>>> would like to know the start point  from where I can start doing small
>>> changes.
>>
>>
>> If you don't understand the wireless stack, I suggest you do some
>> research on it first, converting a driver to the in-kernel stack is a
>> _very_ difficult thing and not something that someone without any
>> experience in this area is going to be able to do easily.
>
>
> I second this suggestion. Your skill level is not nearly sufficient for this
> sort of task. Note that there is a group working on driver rtl8192su, which
> should be able to replace rtl8712u. The participants are very highly skilled
> wireless developers; however, they are having trouble. The internals of the
> Realtek chips are not revealed to anyone in any form other than the code
> they release.
>
> Larry
>
>


Thank you Larry  ,Tillman , Greg for your valuable suggestions. I am
interested to learn wireless stack .I have already read wireless wiki
documentation , sort of rtl8712 code , cfg80112  APIs . Yeah I agree
with you Greg and Larry that its _very_ difficult to thing to convert
driver in kernel and also rtl8712 has more files compare to others.
Anyway however difficult or tough it may be but I have to go through
it once to become highly skilled or good engineer . I would give it a
try even if I will fail I believe at least 1% of my knowledge will be
improved . More suggestions are welcome.

I have did

git remote add gregkh
http://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git

git pull gregkh

git rebase my_local_branch

I have got some conflicts .I can solve them but they are too many . I
am trying to solve it . After that I will soon resend this patch.

Thanks

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[punit vara]

On Mon, Oct 19, 2015 at 8:51 PM, punit vara <punitvara@gmail.com> wrote:
> On Mon, Oct 19, 2015 at 8:14 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
>> On 10/18/2015 09:00 PM, Greg KH wrote:
>>>
>>> On Sun, Oct 18, 2015 at 12:02:53PM +0530, punit vara wrote:
>>>>
>>>> One more thing I would like suggestion how can start switching this
>>>> driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
>>>> ? Simultaneously I am trying to understand the flow of driver . I
>>>> would like to know the start point  from where I can start doing small
>>>> changes.
>>>
>>>
>>> If you don't understand the wireless stack, I suggest you do some
>>> research on it first, converting a driver to the in-kernel stack is a
>>> _very_ difficult thing and not something that someone without any
>>> experience in this area is going to be able to do easily.
>>
>>
>> I second this suggestion. Your skill level is not nearly sufficient for this
>> sort of task. Note that there is a group working on driver rtl8192su, which
>> should be able to replace rtl8712u. The participants are very highly skilled
>> wireless developers; however, they are having trouble. The internals of the
>> Realtek chips are not revealed to anyone in any form other than the code
>> they release.
>>
>> Larry
>>
>>
>
>
> Thank you Larry  ,Tillman , Greg for your valuable suggestions. I am
> interested to learn wireless stack .I have already read wireless wiki
> documentation , sort of rtl8712 code , cfg80112  APIs . Yeah I agree
> with you Greg and Larry that its _very_ difficult to thing to convert
> driver in kernel and also rtl8712 has more files compare to others.
> Anyway however difficult or tough it may be but I have to go through
> it once to become highly skilled or good engineer . I would give it a
> try even if I will fail I believe at least 1% of my knowledge will be
> improved . More suggestions are welcome.
>
> I have did
>
> git remote add gregkh
> http://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
>
> git pull gregkh
>
> git rebase my_local_branch
>
> I have got some conflicts .I can solve them but they are too many . I
> am trying to solve it . After that I will soon resend this patch.
>
> Thanks

@Greg KH
I am working on linux-next .I have tried to rebase my local branch on
your staging tree but I am getting too many conflict .and I have tried
to clone your staging tree separately but due slow internet I am
unable to clone it fully . Is there any other way I can get your
staging tree by downloading ?

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Greg KH]

On Fri, Oct 23, 2015 at 12:34:36AM +0530, punit vara wrote:
> On Mon, Oct 19, 2015 at 8:51 PM, punit vara <punitvara@gmail.com> wrote:
> > On Mon, Oct 19, 2015 at 8:14 AM, Larry Finger <Larry.Finger@lwfinger.net> wrote:
> >> On 10/18/2015 09:00 PM, Greg KH wrote:
> >>>
> >>> On Sun, Oct 18, 2015 at 12:02:53PM +0530, punit vara wrote:
> >>>>
> >>>> One more thing I would like suggestion how can start switching this
> >>>> driver to LIB80211 ,MAC80211 ? Which is the first file I should focus
> >>>> ? Simultaneously I am trying to understand the flow of driver . I
> >>>> would like to know the start point  from where I can start doing small
> >>>> changes.
> >>>
> >>>
> >>> If you don't understand the wireless stack, I suggest you do some
> >>> research on it first, converting a driver to the in-kernel stack is a
> >>> _very_ difficult thing and not something that someone without any
> >>> experience in this area is going to be able to do easily.
> >>
> >>
> >> I second this suggestion. Your skill level is not nearly sufficient for this
> >> sort of task. Note that there is a group working on driver rtl8192su, which
> >> should be able to replace rtl8712u. The participants are very highly skilled
> >> wireless developers; however, they are having trouble. The internals of the
> >> Realtek chips are not revealed to anyone in any form other than the code
> >> they release.
> >>
> >> Larry
> >>
> >>
> >
> >
> > Thank you Larry  ,Tillman , Greg for your valuable suggestions. I am
> > interested to learn wireless stack .I have already read wireless wiki
> > documentation , sort of rtl8712 code , cfg80112  APIs . Yeah I agree
> > with you Greg and Larry that its _very_ difficult to thing to convert
> > driver in kernel and also rtl8712 has more files compare to others.
> > Anyway however difficult or tough it may be but I have to go through
> > it once to become highly skilled or good engineer . I would give it a
> > try even if I will fail I believe at least 1% of my knowledge will be
> > improved . More suggestions are welcome.
> >
> > I have did
> >
> > git remote add gregkh
> > http://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
> >
> > git pull gregkh
> >
> > git rebase my_local_branch
> >
> > I have got some conflicts .I can solve them but they are too many . I
> > am trying to solve it . After that I will soon resend this patch.
> >
> > Thanks
> 
> @Greg KH
> I am working on linux-next .I have tried to rebase my local branch on
> your staging tree but I am getting too many conflict .and I have tried
> to clone your staging tree separately but due slow internet I am
> unable to clone it fully . Is there any other way I can get your
> staging tree by downloading ?

git.kernel.org is the only location, sorry.

Try starting with a "clean" version of Linus's tree and just add a
branch for my tree, it should be quite a small download.

greg k-h

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Dan Carpenter]

On Fri, Oct 23, 2015 at 12:34:36AM +0530, punit vara wrote:
> I am working on linux-next .I have tried to rebase my local branch on
> your staging tree but I am getting too many conflict .and I have tried
> to clone your staging tree separately but due slow internet I am
> unable to clone it fully . Is there any other way I can get your
> staging tree by downloading ?

For a while, I had the worst internet of any kernel dev.  I can help. :)

Do you have any complete kernel git repository?  If you download it one
time then you just do a `git fetch` and `git checkout` after that.
Never do a `git pull`.

Downloading the linux kernel git repository the first time over bad
internet is a huge headache because if you lose the connection then you
have to restart.  See if someone can post a .tar.gz of the kernel .git
directory on a webpage for you then you can download it bit by bit using
wget.  Unpack it and do a `git reset --hard`.

regards,
dan carpenter

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[punit vara]

On Fri, Oct 23, 2015 at 12:52 AM, Dan Carpenter
<dan.carpenter@oracle.com> wrote:
> On Fri, Oct 23, 2015 at 12:34:36AM +0530, punit vara wrote:
>> I am working on linux-next .I have tried to rebase my local branch on
>> your staging tree but I am getting too many conflict .and I have tried
>> to clone your staging tree separately but due slow internet I am
>> unable to clone it fully . Is there any other way I can get your
>> staging tree by downloading ?
>
> For a while, I had the worst internet of any kernel dev.  I can help. :)
>
> Do you have any complete kernel git repository?  If you download it one
> time then you just do a `git fetch` and `git checkout` after that.
> Never do a `git pull`.
>
> Downloading the linux kernel git repository the first time over bad
> internet is a huge headache because if you lose the connection then you
> have to restart.  See if someone can post a .tar.gz of the kernel .git
> directory on a webpage for you then you can download it bit by bit using
> wget.  Unpack it and do a `git reset --hard`.
>
> regards,
> dan carpenter

>>git branch -a

  master
* my_local_branch
  old-local-1
  remotes/gregkh/master
  remotes/gregkh/staging-linus
  remotes/gregkh/staging-next
  remotes/gregkh/staging-testing
  remotes/gregkh/test
  remotes/linux-next/akpm
  remotes/linux-next/akpm-base
  remotes/linux-next/master
  remotes/linux-next/stable
  remotes/origin/HEAD -> origin/master
  remotes/origin/master

>>git remote -v
gregkh    http://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
(fetch)
gregkh    http://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
(push)
linux-next    https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(fetch)
linux-next    https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(push)
origin    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
(fetch)
origin    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
(push)

Above is my situation I have performed >> commands in terminal.

>>git checkout origin/master

>>git checkout -b experimental origin/master

>>git fetch gregkh

Am I doing the right thing to get staging changes in my experimental branch ?

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[Dan Carpenter]

First fetch the changes, then check them out.

$ git fetch git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git staging-next
$ git checkout FETCH_HEAD

regards,
dan carpenter

Re: [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test

[punit vara]

On Fri, Oct 23, 2015 at 2:04 AM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> First fetch the changes, then check them out.
>
> $ git fetch git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git staging-next
> $ git checkout FETCH_HEAD
>
> regards,
> dan carpenter
>
Thank you very much Dan.
Problem is solved :-)

@Greg I haven't found any warnings in your tree .You might applied
this patch before. So I am forward to create other patches