linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Alim Akhtar <alim.akhtar@samsung.com>
Cc: broonie@kernel.org, k.kozlowski@samsung.com,
	mturquette@baylibre.com, linux-samsung-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, rtc-linux@googlegroups.com,
	linux-kernel@vger.kernel.org,
	Thomas Abraham <thomas.ab@samsung.com>
Subject: Re: [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC
Date: Mon, 26 Oct 2015 14:34:11 +0000	[thread overview]
Message-ID: <20151026143411.GL597@x1> (raw)
In-Reply-To: <1445863883-5187-3-git-send-email-alim.akhtar@samsung.com>

On Mon, 26 Oct 2015, Alim Akhtar wrote:

> From: Thomas Abraham <thomas.ab@samsung.com>
> 
> Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
> PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
> clock outputs and battery charger. This patch adds initial support for
> LDO and buck regulators of S2MPS15 device.
> 
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> [Alim: Added s2mps15_devs like rtc and clk and related changes]
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/mfd/sec-core.c              |   31 +++++++
>  drivers/mfd/sec-irq.c               |    8 ++
>  include/linux/mfd/samsung/core.h    |    1 +
>  include/linux/mfd/samsung/s2mps15.h |  158 +++++++++++++++++++++++++++++++++++
>  4 files changed, 198 insertions(+)
>  create mode 100644 include/linux/mfd/samsung/s2mps15.h

I replied to the previous set and won't be reviewing this one until
all of the open points are solved.

> diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> index 2626fc0b5b8c..db3d4d4ff805 100644
> --- a/drivers/mfd/sec-core.c
> +++ b/drivers/mfd/sec-core.c
> @@ -29,6 +29,7 @@
>  #include <linux/mfd/samsung/s2mps11.h>
>  #include <linux/mfd/samsung/s2mps13.h>
>  #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mps15.h>
>  #include <linux/mfd/samsung/s2mpu02.h>
>  #include <linux/mfd/samsung/s5m8763.h>
>  #include <linux/mfd/samsung/s5m8767.h>
> @@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
>  	}
>  };
>  
> +static const struct mfd_cell s2mps15_devs[] = {
> +	{
> +		.name = "s2mps15-pmic",
> +	}, {
> +		.name = "s2mps15-rtc",
> +	}, {
> +		.name = "s2mps15-clk",
> +		.of_compatible = "samsung,s2mps15-clk",
> +	},
> +};
> +
>  static const struct mfd_cell s2mpa01_devs[] = {
>  	{
>  		.name = "s2mpa01-pmic",
> @@ -125,6 +137,9 @@ static const struct of_device_id sec_dt_match[] = {
>  		.compatible = "samsung,s2mps14-pmic",
>  		.data = (void *)S2MPS14X,
>  	}, {
> +		.compatible = "samsung,s2mps15-pmic",
> +		.data = (void *)S2MPS15X,
> +	}, {
>  		.compatible = "samsung,s2mpa01-pmic",
>  		.data = (void *)S2MPA01,
>  	}, {
> @@ -226,6 +241,15 @@ static const struct regmap_config s2mps14_regmap_config = {
>  	.cache_type = REGCACHE_FLAT,
>  };
>  
> +static const struct regmap_config s2mps15_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = S2MPS15_REG_LDODSCH4,
> +	.volatile_reg = s2mps11_volatile,
> +	.cache_type = REGCACHE_FLAT,
> +};
> +
>  static const struct regmap_config s2mpu02_regmap_config = {
>  	.reg_bits = 8,
>  	.val_bits = 8,
> @@ -387,6 +411,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
>  	case S2MPS14X:
>  		regmap = &s2mps14_regmap_config;
>  		break;
> +	case S2MPS15X:
> +		regmap = &s2mps15_regmap_config;
> +		break;
>  	case S5M8763X:
>  		regmap = &s5m8763_regmap_config;
>  		break;
> @@ -445,6 +472,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
>  		sec_devs = s2mps14_devs;
>  		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
>  		break;
> +	case S2MPS15X:
> +		sec_devs = s2mps15_devs;
> +		num_sec_devs = ARRAY_SIZE(s2mps15_devs);
> +		break;
>  	case S2MPU02:
>  		sec_devs = s2mpu02_devs;
>  		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
> diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
> index 806fa8dbb22d..d77de431cc50 100644
> --- a/drivers/mfd/sec-irq.c
> +++ b/drivers/mfd/sec-irq.c
> @@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
>  	S2MPS1X_IRQ_CHIP_COMMON_DATA,
>  };
>  
> +static const struct regmap_irq_chip s2mps15_irq_chip = {
> +	.name = "s2mps15",
> +	S2MPS1X_IRQ_CHIP_COMMON_DATA,
> +};
> +
>  static const struct regmap_irq_chip s2mpu02_irq_chip = {
>  	.name = "s2mpu02",
>  	.irqs = s2mpu02_irqs,
> @@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
>  	case S2MPS14X:
>  		sec_irq_chip = &s2mps14_irq_chip;
>  		break;
> +	case S2MPS15X:
> +		sec_irq_chip = &s2mps15_irq_chip;
> +		break;
>  	case S2MPU02:
>  		sec_irq_chip = &s2mpu02_irq_chip;
>  		break;
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index a06098639399..6bc4bcd488ac 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -44,6 +44,7 @@ enum sec_device_type {
>  	S2MPS11X,
>  	S2MPS13X,
>  	S2MPS14X,
> +	S2MPS15X,
>  	S2MPU02,
>  };
>  
> diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h
> new file mode 100644
> index 000000000000..36d35287c3c0
> --- /dev/null
> +++ b/include/linux/mfd/samsung/s2mps15.h
> @@ -0,0 +1,158 @@
> +/*
> + * Copyright (c) 2015 Samsung Electronics Co., Ltd
> + *              http://www.samsung.com
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_MFD_S2MPS15_H
> +#define __LINUX_MFD_S2MPS15_H
> +
> +/* S2MPS15 registers */
> +enum s2mps15_reg {
> +	S2MPS15_REG_ID,
> +	S2MPS15_REG_INT1,
> +	S2MPS15_REG_INT2,
> +	S2MPS15_REG_INT3,
> +	S2MPS15_REG_INT1M,
> +	S2MPS15_REG_INT2M,
> +	S2MPS15_REG_INT3M,
> +	S2MPS15_REG_ST1,
> +	S2MPS15_REG_ST2,
> +	S2MPS15_REG_PWRONSRC,
> +	S2MPS15_REG_OFFSRC,
> +	S2MPS15_REG_BU_CHG,
> +	S2MPS15_REG_RTC_BUF,
> +	S2MPS15_REG_CTRL1,
> +	S2MPS15_REG_CTRL2,
> +	S2MPS15_REG_RSVD1,
> +	S2MPS15_REG_RSVD2,
> +	S2MPS15_REG_RSVD3,
> +	S2MPS15_REG_RSVD4,
> +	S2MPS15_REG_RSVD5,
> +	S2MPS15_REG_RSVD6,
> +	S2MPS15_REG_CTRL3,
> +	S2MPS15_REG_RSVD7,
> +	S2MPS15_REG_RSVD8,
> +	S2MPS15_REG_RSVD9,
> +	S2MPS15_REG_B1CTRL1,
> +	S2MPS15_REG_B1CTRL2,
> +	S2MPS15_REG_B2CTRL1,
> +	S2MPS15_REG_B2CTRL2,
> +	S2MPS15_REG_B3CTRL1,
> +	S2MPS15_REG_B3CTRL2,
> +	S2MPS15_REG_B4CTRL1,
> +	S2MPS15_REG_B4CTRL2,
> +	S2MPS15_REG_B5CTRL1,
> +	S2MPS15_REG_B5CTRL2,
> +	S2MPS15_REG_B6CTRL1,
> +	S2MPS15_REG_B6CTRL2,
> +	S2MPS15_REG_B7CTRL1,
> +	S2MPS15_REG_B7CTRL2,
> +	S2MPS15_REG_B8CTRL1,
> +	S2MPS15_REG_B8CTRL2,
> +	S2MPS15_REG_B9CTRL1,
> +	S2MPS15_REG_B9CTRL2,
> +	S2MPS15_REG_B10CTRL1,
> +	S2MPS15_REG_B10CTRL2,
> +	S2MPS15_REG_BBCTRL1,
> +	S2MPS15_REG_BBCTRL2,
> +	S2MPS15_REG_BRAMP,
> +	S2MPS15_REG_LDODVS1,
> +	S2MPS15_REG_LDODVS2,
> +	S2MPS15_REG_LDODVS3,
> +	S2MPS15_REG_LDODVS4,
> +	S2MPS15_REG_L1CTRL,
> +	S2MPS15_REG_L2CTRL,
> +	S2MPS15_REG_L3CTRL,
> +	S2MPS15_REG_L4CTRL,
> +	S2MPS15_REG_L5CTRL,
> +	S2MPS15_REG_L6CTRL,
> +	S2MPS15_REG_L7CTRL,
> +	S2MPS15_REG_L8CTRL,
> +	S2MPS15_REG_L9CTRL,
> +	S2MPS15_REG_L10CTRL,
> +	S2MPS15_REG_L11CTRL,
> +	S2MPS15_REG_L12CTRL,
> +	S2MPS15_REG_L13CTRL,
> +	S2MPS15_REG_L14CTRL,
> +	S2MPS15_REG_L15CTRL,
> +	S2MPS15_REG_L16CTRL,
> +	S2MPS15_REG_L17CTRL,
> +	S2MPS15_REG_L18CTRL,
> +	S2MPS15_REG_L19CTRL,
> +	S2MPS15_REG_L20CTRL,
> +	S2MPS15_REG_L21CTRL,
> +	S2MPS15_REG_L22CTRL,
> +	S2MPS15_REG_L23CTRL,
> +	S2MPS15_REG_L24CTRL,
> +	S2MPS15_REG_L25CTRL,
> +	S2MPS15_REG_L26CTRL,
> +	S2MPS15_REG_L27CTRL,
> +	S2MPS15_REG_LDODSCH1,
> +	S2MPS15_REG_LDODSCH2,
> +	S2MPS15_REG_LDODSCH3,
> +	S2MPS15_REG_LDODSCH4,
> +};
> +
> +/* S2MPS15 regulator ids */
> +enum s2mps15_regulators {
> +	S2MPS15_LDO1,
> +	S2MPS15_LDO2,
> +	S2MPS15_LDO3,
> +	S2MPS15_LDO4,
> +	S2MPS15_LDO5,
> +	S2MPS15_LDO6,
> +	S2MPS15_LDO7,
> +	S2MPS15_LDO8,
> +	S2MPS15_LDO9,
> +	S2MPS15_LDO10,
> +	S2MPS15_LDO11,
> +	S2MPS15_LDO12,
> +	S2MPS15_LDO13,
> +	S2MPS15_LDO14,
> +	S2MPS15_LDO15,
> +	S2MPS15_LDO16,
> +	S2MPS15_LDO17,
> +	S2MPS15_LDO18,
> +	S2MPS15_LDO19,
> +	S2MPS15_LDO20,
> +	S2MPS15_LDO21,
> +	S2MPS15_LDO22,
> +	S2MPS15_LDO23,
> +	S2MPS15_LDO24,
> +	S2MPS15_LDO25,
> +	S2MPS15_LDO26,
> +	S2MPS15_LDO27,
> +	S2MPS15_BUCK1,
> +	S2MPS15_BUCK2,
> +	S2MPS15_BUCK3,
> +	S2MPS15_BUCK4,
> +	S2MPS15_BUCK5,
> +	S2MPS15_BUCK6,
> +	S2MPS15_BUCK7,
> +	S2MPS15_BUCK8,
> +	S2MPS15_BUCK9,
> +	S2MPS15_BUCK10,
> +	S2MPS15_BUCK11,
> +	S2MPS15_REGULATOR_MAX,
> +};
> +
> +#define S2MPS15_LDO_VSEL_MASK		(0x3F)
> +#define S2MPS15_BUCK_VSEL_MASK		(0xFF)
> +
> +#define S2MPS15_ENABLE_SHIFT		(0x06)
> +#define S2MPS15_ENABLE_MASK		(0x03 << S2MPS15_ENABLE_SHIFT)
> +
> +#define S2MPS15_LDO_N_VOLTAGES		(S2MPS15_LDO_VSEL_MASK + 1)
> +#define S2MPS15_BUCK_N_VOLTAGES	(S2MPS15_BUCK_VSEL_MASK + 1)
> +
> +#endif /* __LINUX_MFD_S2MPS15_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-10-26 14:34 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-26 12:51 [PATCH v3 0/5] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 1/5] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC Alim Akhtar
2015-10-26 14:34   ` Lee Jones [this message]
2015-10-28  1:15     ` Krzysztof Kozlowski
2015-10-28  8:46       ` Lee Jones
2015-10-28 11:21         ` Alim Akhtar
2015-10-28 13:47           ` Krzysztof Kozlowski
2015-10-28 13:44         ` Krzysztof Kozlowski
2015-10-28 13:51           ` Lee Jones
2015-10-29  4:19             ` Alim Akhtar
2015-10-28  1:28   ` Krzysztof Kozlowski
2015-10-26 12:51 ` [PATCH v3 3/5] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-26 12:51 ` [PATCH v3 4/5] clk: s2mps15: Add support for S2MPS15 clocks Alim Akhtar
2015-10-28  1:22   ` Krzysztof Kozlowski
2015-10-28  3:36     ` Alim Akhtar
2015-10-28  1:26   ` Krzysztof Kozlowski
2015-10-28  4:34     ` Krzysztof Kozlowski
2015-10-28  4:55       ` Alim Akhtar
2015-10-28  5:36         ` Krzysztof Kozlowski
2015-10-26 12:51 ` [PATCH v3 5/5] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar
2015-10-27 22:59   ` [rtc-linux] " Alexandre Belloni
2015-10-28  1:29   ` Krzysztof Kozlowski
2015-10-28  1:53     ` Mark Brown
2015-10-28  2:17       ` Krzysztof Kozlowski
2015-10-28  3:14         ` Alim Akhtar
2015-10-28  3:31           ` Krzysztof Kozlowski
2015-10-28  3:33             ` Alim Akhtar
2015-10-28  9:48             ` [rtc-linux] " Alexandre Belloni
2015-10-28 10:30               ` Alim Akhtar
2015-10-28 13:35                 ` Krzysztof Kozlowski
2015-10-28 13:31               ` Krzysztof Kozlowski
2015-10-28 13:43                 ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151026143411.GL597@x1 \
    --to=lee.jones@linaro.org \
    --cc=alim.akhtar@samsung.com \
    --cc=broonie@kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rtc-linux@googlegroups.com \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).