From: Dave Penkler <dpenkler@gmail.com>
To: gregkh@linuxfoundation.org
Cc: peter.chen@freescale.com, teuniz@gmail.com,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
dpenkler@gmail.org
Subject: [PATCH v3 1/5] Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.
Date: Wed, 11 Nov 2015 12:16:10 +0100 [thread overview]
Message-ID: <20151111111609.GA1875@slacky> (raw)
In-Reply-To: <20151111110827.GA1785@slacky>
Background:
When performing a read on an instrument that is executing a function
that runs longer than the USB timeout the instrument may hang and require
a device reset to recover. The READ_STATUS_BYTE operation always returns
even when the instrument is busy permitting to poll for the appropriate
condition. This capability is refered to in instrument application notes
on synchronizing acquisitions for other platforms.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
---
drivers/usb/class/usbtmc.c | 223 +++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/usb/tmc.h | 2 +
2 files changed, 225 insertions(+)
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 7a11a82..c1593e7 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -87,6 +87,20 @@ struct usbtmc_device_data {
u8 bTag_last_write; /* needed for abort */
u8 bTag_last_read; /* needed for abort */
+
+ /* data for interrupt in endpoint handling */
+ u8 bNotify1;
+ u8 bNotify2;
+ u16 ifnum;
+ u8 iin_bTag;
+ u8 *iin_buffer;
+ atomic_t iin_data_valid;
+ unsigned int iin_ep;
+ int iin_ep_present;
+ int iin_interval;
+ struct urb *iin_urb;
+ u16 iin_wMaxPacketSize;
+
u8 rigol_quirk;
/* attributes from the USB TMC spec for this device */
@@ -99,6 +113,7 @@ struct usbtmc_device_data {
struct usbtmc_dev_capabilities capabilities;
struct kref kref;
struct mutex io_mutex; /* only one i/o function running at a time */
+ wait_queue_head_t waitq;
};
#define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref)
@@ -373,6 +388,91 @@ exit:
return rv;
}
+static int usbtmc488_ioctl_read_stb(struct usbtmc_device_data *data,
+ unsigned long arg)
+{
+ u8 *buffer;
+ struct device *dev;
+ int rv;
+ u8 tag, stb;
+
+ dev = &data->intf->dev;
+
+ dev_dbg(dev, "Enter ioctl_read_stb iin_ep_present: %d\n",
+ data->iin_ep_present);
+
+ buffer = kmalloc(8, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+
+ atomic_set(&data->iin_data_valid, 0);
+
+ rv = usb_control_msg(data->usb_dev,
+ usb_rcvctrlpipe(data->usb_dev, 0),
+ USBTMC488_REQUEST_READ_STATUS_BYTE,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ data->iin_bTag,
+ data->ifnum,
+ buffer, 0x03, USBTMC_TIMEOUT);
+
+ if (rv < 0) {
+ dev_err(dev, "stb usb_control_msg returned %d\n", rv);
+ goto exit;
+ }
+
+ if (buffer[0] != USBTMC_STATUS_SUCCESS) {
+ dev_err(dev, "control status returned %x\n",
+ buffer[0]);
+ rv = -EIO;
+ goto exit;
+ }
+
+ if (data->iin_ep_present) {
+
+ rv = wait_event_interruptible_timeout(
+ data->waitq,
+ (atomic_read(&data->iin_data_valid) != 0),
+ USBTMC_TIMEOUT
+ );
+
+ if (rv < 0) {
+ dev_dbg(dev, "wait interrupted %d\n", rv);
+ goto exit;
+ }
+
+ if (rv == 0) {
+ dev_dbg(dev, "wait timed out\n");
+ rv = -ETIME;
+ goto exit;
+ }
+
+ tag = data->bNotify1 & 0x7f;
+
+ if (tag != data->iin_bTag) {
+ dev_err(dev, "expected bTag %x got %x\n",
+ data->iin_bTag, tag);
+ }
+
+ stb = data->bNotify2;
+ } else {
+ stb = buffer[2];
+ }
+
+ rv = copy_to_user((void __user *)arg, &stb, sizeof(stb));
+ if (rv)
+ rv = -EFAULT;
+
+ exit:
+ /* bump interrupt bTag */
+ data->iin_bTag += 1;
+ if (data->iin_bTag > 127)
+ data->iin_bTag = 2;
+
+ kfree(buffer);
+ return rv;
+}
+
/*
* Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-IN endpoint.
* @transfer_size: number of bytes to request from the device.
@@ -1069,6 +1169,11 @@ static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case USBTMC_IOCTL_ABORT_BULK_IN:
retval = usbtmc_ioctl_abort_bulk_in(data);
break;
+
+ case USBTMC488_IOCTL_READ_STB:
+ retval = usbtmc488_ioctl_read_stb(data, arg);
+ break;
+
}
skip_io_on_zombie:
@@ -1092,6 +1197,69 @@ static struct usb_class_driver usbtmc_class = {
.minor_base = USBTMC_MINOR_BASE,
};
+static void usbtmc_interrupt(struct urb *urb)
+{
+ struct usbtmc_device_data *data = urb->context;
+ int status = urb->status;
+ int rv;
+
+ dev_dbg(&data->intf->dev, "int status: %d len %d\n",
+ status, urb->actual_length);
+
+ switch (status) {
+ case 0: /* SUCCESS */
+
+ if (data->iin_buffer[0] & 0x80) {
+ /* check for valid STB notification */
+ if ((data->iin_buffer[0] & 0x7f) > 1) {
+ data->bNotify1 = data->iin_buffer[0];
+ data->bNotify2 = data->iin_buffer[1];
+ atomic_set(&data->iin_data_valid, 1);
+ wake_up_interruptible(&data->waitq);
+ goto exit;
+ }
+ }
+ dev_warn(&data->intf->dev, "invalid notification: %x\n",
+ data->iin_buffer[0]);
+ break;
+ case -EOVERFLOW:
+ dev_err(&data->intf->dev,
+ "%s - overflow with length %d, actual length is %d\n",
+ __func__, data->iin_wMaxPacketSize, urb->actual_length);
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -EILSEQ:
+ case -ETIME:
+ /* urb terminated, clean up */
+ dev_dbg(&data->intf->dev,
+ "%s - urb terminated, status: %d\n",
+ __func__, status);
+ return;
+ default:
+ dev_err(&data->intf->dev,
+ "%s - unknown status received: %d\n",
+ __func__, status);
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv) {
+ dev_err(&data->intf->dev, "%s - usb_submit_urb failed: %d\n",
+ __func__, rv);
+ }
+}
+
+static void usbtmc_free_int(struct usbtmc_device_data *data)
+{
+ if (data->iin_ep_present) {
+ if (data->iin_urb) {
+ usb_kill_urb(data->iin_urb);
+ kfree(data->iin_buffer);
+ usb_free_urb(data->iin_urb);
+ kref_put(&data->kref, usbtmc_delete);
+ }
+ }
+}
static int usbtmc_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -1114,6 +1282,8 @@ static int usbtmc_probe(struct usb_interface *intf,
usb_set_intfdata(intf, data);
kref_init(&data->kref);
mutex_init(&data->io_mutex);
+ init_waitqueue_head(&data->waitq);
+ atomic_set(&data->iin_data_valid, 0);
data->zombie = 0;
/* Determine if it is a Rigol or not */
@@ -1134,9 +1304,12 @@ static int usbtmc_probe(struct usb_interface *intf,
data->bTag = 1;
data->TermCharEnabled = 0;
data->TermChar = '\n';
+ /* 2 <= bTag <= 127 USBTMC-USB488 subclass specification 4.3.1 */
+ data->iin_bTag = 2;
/* USBTMC devices have only one setting, so use that */
iface_desc = data->intf->cur_altsetting;
+ data->ifnum = iface_desc->desc.bInterfaceNumber;
/* Find bulk in endpoint */
for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) {
@@ -1161,6 +1334,20 @@ static int usbtmc_probe(struct usb_interface *intf,
break;
}
}
+ /* Find int endpoint */
+ for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) {
+ endpoint = &iface_desc->endpoint[n].desc;
+
+ if (usb_endpoint_is_int_in(endpoint)) {
+ data->iin_ep_present = 1;
+ data->iin_ep = endpoint->bEndpointAddress;
+ data->iin_wMaxPacketSize = usb_endpoint_maxp(endpoint);
+ data->iin_interval = endpoint->bInterval;
+ dev_dbg(&intf->dev, "Found Int in endpoint at %u\n",
+ data->iin_ep);
+ break;
+ }
+ }
retcode = get_capabilities(data);
if (retcode)
@@ -1169,6 +1356,40 @@ static int usbtmc_probe(struct usb_interface *intf,
retcode = sysfs_create_group(&intf->dev.kobj,
&capability_attr_grp);
+
+ if (data->iin_ep_present) {
+ /* allocate int urb */
+ data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!data->iin_urb) {
+ dev_err(&intf->dev, "Failed to allocate int urb\n");
+ goto error_register;
+ }
+
+ /* will reference data in int urb */
+ kref_get(&data->kref);
+
+ /* allocate buffer for interrupt in */
+ data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
+ GFP_KERNEL);
+ if (!data->iin_buffer) {
+ dev_err(&intf->dev, "Failed to allocate int buf\n");
+ goto error_register;
+ }
+
+ /* fill interrupt urb */
+ usb_fill_int_urb(data->iin_urb, data->usb_dev,
+ usb_rcvintpipe(data->usb_dev, data->iin_ep),
+ data->iin_buffer, data->iin_wMaxPacketSize,
+ usbtmc_interrupt,
+ data, data->iin_interval);
+
+ if (usb_submit_urb(data->iin_urb, GFP_KERNEL)) {
+ retcode = -EIO;
+ dev_err(&intf->dev, "Failed to submit iin_urb\n");
+ goto error_register;
+ }
+ }
+
retcode = sysfs_create_group(&intf->dev.kobj, &data_attr_grp);
retcode = usb_register_dev(intf, &usbtmc_class);
@@ -1185,6 +1406,7 @@ static int usbtmc_probe(struct usb_interface *intf,
error_register:
sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
sysfs_remove_group(&intf->dev.kobj, &data_attr_grp);
+ usbtmc_free_int(data);
kref_put(&data->kref, usbtmc_delete);
return retcode;
}
@@ -1196,6 +1418,7 @@ static void usbtmc_disconnect(struct usb_interface *intf)
dev_dbg(&intf->dev, "usbtmc_disconnect called\n");
data = usb_get_intfdata(intf);
+ usbtmc_free_int(data);
usb_deregister_dev(intf, &usbtmc_class);
sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
sysfs_remove_group(&intf->dev.kobj, &data_attr_grp);
diff --git a/include/uapi/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h
index c045ae1..49060ea 100644
--- a/include/uapi/linux/usb/tmc.h
+++ b/include/uapi/linux/usb/tmc.h
@@ -30,6 +30,7 @@
#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6
#define USBTMC_REQUEST_GET_CAPABILITIES 7
#define USBTMC_REQUEST_INDICATOR_PULSE 64
+#define USBTMC488_REQUEST_READ_STATUS_BYTE 128
/* Request values for USBTMC driver's ioctl entry point */
#define USBTMC_IOC_NR 91
@@ -39,5 +40,6 @@
#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4)
#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6)
#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7)
+#define USBTMC488_IOCTL_READ_STB _IOR(USBTMC_IOC_NR, 18, unsigned char)
#endif
--
2.5.1
next prev parent reply other threads:[~2015-11-11 11:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-11 11:08 [PATCH v3 0/5] usb: usbtmc: Add support for missing functions in USBTMC-USB488 spec Dave Penkler
2015-11-11 11:16 ` Dave Penkler [this message]
2015-11-11 19:03 ` [PATCH v3 1/5] Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation Andy Shevchenko
2015-11-11 19:48 ` Sergei Shtylyov
2015-11-11 19:54 ` Andy Shevchenko
2015-11-11 21:08 ` Greg Kroah-Hartman
[not found] ` <CAL=kjP3sdPu4FZcznoGMo5a_S2fi376UdfykcMw65+w2g+QQqA@mail.gmail.com>
2015-11-12 9:41 ` Andy Shevchenko
2015-11-11 11:16 ` [PATCH v3 2/5] Add support for USBTMC USB488 SRQ notification with fasync Dave Penkler
2015-11-11 11:16 ` [PATCH v3 3/5] Add support for receiving USBTMC USB488 SRQ notifications via poll/select Dave Penkler
2015-11-11 19:04 ` Andy Shevchenko
2015-11-11 11:20 ` [PATCH v3 4/5] Add ioctl to retrieve USBTMC-USB488 capabilities Dave Penkler
2015-11-11 19:34 ` Andy Shevchenko
2015-11-11 11:21 ` [PATCH v3 5/5] Add ioctls to enable and disable local controls on an instrument Dave Penkler
2015-11-11 19:36 ` Andy Shevchenko
2015-11-13 8:59 ` Dave Penkler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151111111609.GA1875@slacky \
--to=dpenkler@gmail.com \
--cc=dpenkler@gmail.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@freescale.com \
--cc=teuniz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).