From: Christoph Hellwig <hch@lst.de>
To: Steve Wise <swise@opengridcomputing.com>
Cc: Christoph Hellwig <hch@lst.de>,
linux-rdma@vger.kernel.org, sagig@dev.mellanox.co.il,
bart.vanassche@sandisk.com, axboe@fb.com,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/9] IB: add a helper to safely drain a QP
Date: Sat, 14 Nov 2015 08:05:31 +0100 [thread overview]
Message-ID: <20151114070531.GC27738@lst.de> (raw)
In-Reply-To: <56460CC4.3030001@opengridcomputing.com>
On Fri, Nov 13, 2015 at 10:16:04AM -0600, Steve Wise wrote:
> So how can we do this for iwarp? It seems like all that might be needed is
> to modify the QP state to idle, retrying until it succeeds:
>
> If the QP is transitioning to the Error state, or has not yet
> finished flushing the Work Queues, a Modify QP request to transition
> to the IDLE state MUST fail with an Immediate Error. If none of the
> prior conditions are true, a Modify QP to the Idle state MUST take
> the QP to the Idle state. No other state transitions out of Error
> are supported. Any attempt to transition the QP to a state other
> than Idle MUST result in an Immediate Error.
Can you try to write up some code for this? We could then wire it up
in the common helper.
next prev parent reply other threads:[~2015-11-14 7:05 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-13 13:46 add a proper completion queue abstraction Christoph Hellwig
2015-11-13 13:46 ` [PATCH 1/9] move blk_iopoll to limit and make it generally available Christoph Hellwig
2015-11-13 15:23 ` Or Gerlitz
2015-11-14 7:02 ` Christoph Hellwig
2015-11-15 8:48 ` Sagi Grimberg
2015-11-15 9:04 ` Or Gerlitz
2015-11-15 13:16 ` Sagi Grimberg
2015-11-15 12:51 ` Christoph Hellwig
2015-11-13 19:19 ` Bart Van Assche
2015-11-14 7:02 ` Christoph Hellwig
2015-11-17 17:16 ` Bart Van Assche
2015-11-17 17:27 ` Bart Van Assche
2015-11-18 13:58 ` Christoph Hellwig
2015-11-13 13:46 ` [PATCH 2/9] IB: add a proper completion queue abstraction Christoph Hellwig
2015-11-13 18:25 ` Jason Gunthorpe
2015-11-13 19:57 ` Bart Van Assche
2015-11-13 22:06 ` Jason Gunthorpe
2015-11-14 7:13 ` Christoph Hellwig
2015-11-23 20:37 ` Jason Gunthorpe
2015-11-23 21:04 ` Bart Van Assche
2015-11-23 21:28 ` Jason Gunthorpe
2015-11-23 21:54 ` Bart Van Assche
2015-11-23 22:18 ` Jason Gunthorpe
2015-11-23 22:33 ` Bart Van Assche
2015-11-23 23:06 ` Jason Gunthorpe
[not found] ` <B24F4DDE-709A-4D2D-8B26-4E83325DBB1A@asomi.com>
2015-11-24 0:00 ` Jason Gunthorpe
2015-11-24 0:34 ` Tom Talpey
2015-11-24 0:40 ` Jason Gunthorpe
2015-11-24 2:35 ` Caitlin Bestler
2015-11-24 7:03 ` Jason Gunthorpe
2015-11-24 12:52 ` Tom Talpey
2015-11-14 7:08 ` Christoph Hellwig
2015-11-23 20:01 ` Jason Gunthorpe
2015-11-23 20:57 ` Christoph Hellwig
2015-11-15 9:40 ` Sagi Grimberg
2015-11-15 12:55 ` Christoph Hellwig
2015-11-15 13:21 ` Sagi Grimberg
2015-11-17 17:52 ` Bart Van Assche
2015-11-18 7:55 ` Sagi Grimberg
2015-11-18 18:20 ` Bart Van Assche
2015-11-20 10:16 ` Christoph Hellwig
2015-11-20 16:50 ` Bart Van Assche
2015-11-22 9:51 ` Sagi Grimberg
2015-11-22 10:13 ` Christoph Hellwig
2015-11-22 10:36 ` Sagi Grimberg
2015-11-22 13:23 ` Christoph Hellwig
2015-11-22 14:57 ` Sagi Grimberg
2015-11-22 16:55 ` Bart Van Assche
2015-11-18 14:00 ` Christoph Hellwig
2015-11-13 13:46 ` [PATCH 3/9] IB: add a helper to safely drain a QP Christoph Hellwig
2015-11-13 16:16 ` Steve Wise
2015-11-14 7:05 ` Christoph Hellwig [this message]
2015-11-15 9:34 ` Sagi Grimberg
2015-11-16 16:38 ` Steve Wise
2015-11-16 18:30 ` Steve Wise
2015-11-16 18:37 ` Sagi Grimberg
2015-11-16 19:03 ` Steve Wise
2015-11-17 8:54 ` Sagi Grimberg
2015-11-23 10:28 ` Sagi Grimberg
2015-11-23 10:35 ` Sagi Grimberg
2015-11-23 14:33 ` 'Christoph Hellwig'
2015-11-23 14:48 ` Steve Wise
2015-11-23 14:44 ` Steve Wise
2015-11-17 17:06 ` Bart Van Assche
2015-11-18 7:59 ` Sagi Grimberg
2015-11-18 11:32 ` Sagi Grimberg
2015-11-18 14:06 ` Christoph Hellwig
2015-11-18 15:21 ` Steve Wise
2015-11-13 13:46 ` [PATCH 4/9] srpt: chain RDMA READ/WRITE requests Christoph Hellwig
2015-11-18 1:17 ` Bart Van Assche
2015-11-18 9:15 ` Sagi Grimberg
2015-11-18 16:32 ` Bart Van Assche
2015-11-20 10:20 ` Christoph Hellwig
2015-11-18 14:06 ` Christoph Hellwig
2015-11-13 13:46 ` [PATCH 5/9] srpt: use the new CQ API Christoph Hellwig
2015-11-17 18:22 ` Bart Van Assche
2015-11-17 19:38 ` Bart Van Assche
2015-11-18 14:03 ` Christoph Hellwig
2015-11-13 13:46 ` [PATCH 6/9] srp: " Christoph Hellwig
2015-11-17 19:56 ` Bart Van Assche
2015-11-18 14:03 ` Christoph Hellwig
2015-11-13 13:46 ` [PATCH 7/9] IB/iser: Use a dedicated descriptor for login Christoph Hellwig
2015-11-15 9:14 ` Or Gerlitz
2015-11-13 13:46 ` [PATCH 8/9] IB/iser: Use helper for container_of Christoph Hellwig
2015-11-13 13:46 ` [PATCH 9/9] IB/iser: Convert to CQ abstraction Christoph Hellwig
2015-11-15 9:21 ` Or Gerlitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151114070531.GC27738@lst.de \
--to=hch@lst.de \
--cc=axboe@fb.com \
--cc=bart.vanassche@sandisk.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=sagig@dev.mellanox.co.il \
--cc=swise@opengridcomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox