From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Cc: linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
koji.matsuoka.xm@renesas.com, linux-gpio@vger.kernel.org,
horms@verge.net.au, geert@glider.be,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 02/04] pinctrl: sh-pfc: r8a7794: Separate DU CDE and DISP
Date: Tue, 17 Nov 2015 12:18:51 +0900 [thread overview]
Message-ID: <20151117031851.24924.18884.sendpatchset@little-apple> (raw)
In-Reply-To: <20151117031832.24924.60685.sendpatchset@little-apple>
From: Magnus Damm <damm+renesas@opensource.se>
Separate DU CDE and DISP signals to let the r8a7794 ALT
board that lacks CDE handle the DISP signal by itself.
The groups "du0_cde_disp" and "du1_cde_disp" are replaced
by "du0_cde", "du1_cde", "du0_disp" and "du1_disp".
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 50 +++++++++++++++++++++++-----------
1 file changed, 34 insertions(+), 16 deletions(-)
--- 0008/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a7794.c 2015-11-16 15:04:00.760513000 +0900
@@ -1616,19 +1616,33 @@ static const unsigned int du1_sync_mux[]
DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK,
DU1_EXVSYNC_DU1_VSYNC_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK
};
-static const unsigned int du0_cde_disp_pins[] = {
- /* CDE DISP */
- RCAR_GP_PIN(2, 31), RCAR_GP_PIN(2, 30),
-};
-static const unsigned int du0_cde_disp_mux[] = {
- DU0_CDE_MARK, DU0_DISP_MARK
-};
-static const unsigned int du1_cde_disp_pins[] = {
- /* CDE DISP */
- RCAR_GP_PIN(4, 31), RCAR_GP_PIN(4, 30),
+static const unsigned int du0_cde_pins[] = {
+ /* CDE */
+ RCAR_GP_PIN(2, 31),
};
-static const unsigned int du1_cde_disp_mux[] = {
- DU1_CDE_MARK, DU1_DISP_MARK
+static const unsigned int du0_cde_mux[] = {
+ DU0_CDE_MARK,
+};
+static const unsigned int du1_cde_pins[] = {
+ /* CDE */
+ RCAR_GP_PIN(4, 31),
+};
+static const unsigned int du1_cde_mux[] = {
+ DU1_CDE_MARK
+};
+static const unsigned int du0_disp_pins[] = {
+ /* DISP */
+ RCAR_GP_PIN(2, 30),
+};
+static const unsigned int du0_disp_mux[] = {
+ DU0_DISP_MARK
+};
+static const unsigned int du1_disp_pins[] = {
+ /* DISP */
+ RCAR_GP_PIN(4, 30),
+};
+static const unsigned int du1_disp_mux[] = {
+ DU1_DISP_MARK
};
static const unsigned int du0_clk_in_pins[] = {
/* CLKIN */
@@ -2932,8 +2946,10 @@ static const struct sh_pfc_pin_group pin
SH_PFC_PIN_GROUP(du1_clk_out),
SH_PFC_PIN_GROUP(du0_sync),
SH_PFC_PIN_GROUP(du1_sync),
- SH_PFC_PIN_GROUP(du0_cde_disp),
- SH_PFC_PIN_GROUP(du1_cde_disp),
+ SH_PFC_PIN_GROUP(du0_cde),
+ SH_PFC_PIN_GROUP(du1_cde),
+ SH_PFC_PIN_GROUP(du0_disp),
+ SH_PFC_PIN_GROUP(du1_disp),
SH_PFC_PIN_GROUP(du0_clk_in),
SH_PFC_PIN_GROUP(du1_clk_in),
SH_PFC_PIN_GROUP(eth_link),
@@ -3122,8 +3138,10 @@ static const char * const du_groups[] =
"du1_clk_out",
"du0_sync",
"du1_sync",
- "du0_cde_disp",
- "du1_cde_disp",
+ "du0_cde",
+ "du1_cde",
+ "du0_disp",
+ "du1_disp",
};
static const char * const du0_groups[] = {
next prev parent reply other threads:[~2015-11-17 3:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:18 [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Magnus Damm
2015-11-17 3:18 ` [PATCH 01/04] pinctrl: sh-pfc: r8a7794: Add DU pin groups Magnus Damm
2015-11-29 21:25 ` Linus Walleij
2015-11-30 8:53 ` Geert Uytterhoeven
2015-11-17 3:18 ` Magnus Damm [this message]
2015-11-17 3:19 ` [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals Magnus Damm
2015-12-21 22:01 ` Sergei Shtylyov
2015-11-17 3:19 ` [PATCH 04/04] pinctrl: sh-pfc: r8a7794: Break out ODDF from sync Magnus Damm
2015-11-20 2:46 ` [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Laurent Pinchart
2015-11-20 7:16 ` Magnus Damm
2015-11-20 14:53 ` Laurent Pinchart
2015-11-25 0:16 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151117031851.24924.18884.sendpatchset@little-apple \
--to=magnus.damm@gmail.com \
--cc=geert@glider.be \
--cc=horms@verge.net.au \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox