From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Cc: linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
koji.matsuoka.xm@renesas.com, linux-gpio@vger.kernel.org,
horms@verge.net.au, geert@glider.be,
laurent.pinchart@ideasonboard.com,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals
Date: Tue, 17 Nov 2015 12:19:02 +0900 [thread overview]
Message-ID: <20151117031902.24924.4588.sendpatchset@little-apple> (raw)
In-Reply-To: <20151117031832.24924.60685.sendpatchset@little-apple>
From: Magnus Damm <damm+renesas@opensource.se>
Add missing r8a7794 DU dot clock output signals and in
particular the DU1_DOTCLKOUT0 signal on GP4_25 which is
needed by DU1 on the r8a7794 ALT board.
The groups "du0_clk_out" and "du1_clk_out" are replaced by
"du0_dotclkout0", "du0_dotclkout1", "du1_dotclkout0" and
"du1_dotclkout1".
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---
drivers/pinctrl/sh-pfc/pfc-r8a7794.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
--- 0014/drivers/pinctrl/sh-pfc/pfc-r8a7794.c
+++ work/drivers/pinctrl/sh-pfc/pfc-r8a7794.c 2015-11-16 22:08:28.230513000 +0900
@@ -1586,18 +1586,32 @@ static const unsigned int du1_rgb888_mux
DU1_DB7_MARK, DU1_DB6_MARK, DU1_DB5_MARK, DU1_DB4_MARK,
DU1_DB3_MARK, DU1_DB2_MARK, DU1_DB1_MARK, DU1_DB0_MARK,
};
-static const unsigned int du0_clk_out_pins[] = {
+static const unsigned int du0_clk0_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(2, 25),
};
-static const unsigned int du0_clk_out_mux[] = {
+static const unsigned int du0_clk0_out_mux[] = {
DU0_DOTCLKOUT0_MARK
};
-static const unsigned int du1_clk_out_pins[] = {
+static const unsigned int du0_clk1_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(2, 26),
+};
+static const unsigned int du0_clk1_out_mux[] = {
+ DU0_DOTCLKOUT1_MARK
+};
+static const unsigned int du1_clk0_out_pins[] = {
+ /* CLKOUT */
+ RCAR_GP_PIN(4, 25),
+};
+static const unsigned int du1_clk0_out_mux[] = {
+ DU1_DOTCLKOUT0_MARK
+};
+static const unsigned int du1_clk1_out_pins[] = {
/* CLKOUT */
RCAR_GP_PIN(4, 26),
};
-static const unsigned int du1_clk_out_mux[] = {
+static const unsigned int du1_clk1_out_mux[] = {
DU1_DOTCLKOUT1_MARK
};
static const unsigned int du0_sync_pins[] = {
@@ -2942,8 +2956,10 @@ static const struct sh_pfc_pin_group pin
SH_PFC_PIN_GROUP(du0_rgb888),
SH_PFC_PIN_GROUP(du1_rgb666),
SH_PFC_PIN_GROUP(du1_rgb888),
- SH_PFC_PIN_GROUP(du0_clk_out),
- SH_PFC_PIN_GROUP(du1_clk_out),
+ SH_PFC_PIN_GROUP(du0_clk0_out),
+ SH_PFC_PIN_GROUP(du0_clk1_out),
+ SH_PFC_PIN_GROUP(du1_clk0_out),
+ SH_PFC_PIN_GROUP(du1_clk1_out),
SH_PFC_PIN_GROUP(du0_sync),
SH_PFC_PIN_GROUP(du1_sync),
SH_PFC_PIN_GROUP(du0_cde),
@@ -3134,8 +3150,10 @@ static const char * const du_groups[] =
"du0_rgb888",
"du1_rgb666",
"du1_rgb888",
- "du0_clk_out",
- "du1_clk_out",
+ "du0_dotclkout0",
+ "du0_dotclkout1",
+ "du1_dotclkout0",
+ "du1_dotclkout1",
"du0_sync",
"du1_sync",
"du0_cde",
next prev parent reply other threads:[~2015-11-17 3:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:18 [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Magnus Damm
2015-11-17 3:18 ` [PATCH 01/04] pinctrl: sh-pfc: r8a7794: Add DU pin groups Magnus Damm
2015-11-29 21:25 ` Linus Walleij
2015-11-30 8:53 ` Geert Uytterhoeven
2015-11-17 3:18 ` [PATCH 02/04] pinctrl: sh-pfc: r8a7794: Separate DU CDE and DISP Magnus Damm
2015-11-17 3:19 ` Magnus Damm [this message]
2015-12-21 22:01 ` [PATCH 03/04] pinctrl: sh-pfc: r8a7794: Add missing dot clock signals Sergei Shtylyov
2015-11-17 3:19 ` [PATCH 04/04] pinctrl: sh-pfc: r8a7794: Break out ODDF from sync Magnus Damm
2015-11-20 2:46 ` [PATCH 00/04] pinctrl: sh-pfc: r8a7794: DU support Laurent Pinchart
2015-11-20 7:16 ` Magnus Damm
2015-11-20 14:53 ` Laurent Pinchart
2015-11-25 0:16 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151117031902.24924.4588.sendpatchset@little-apple \
--to=magnus.damm@gmail.com \
--cc=geert@glider.be \
--cc=horms@verge.net.au \
--cc=koji.matsuoka.xm@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox