From: Dave Hansen <dave@sr71.net>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, Dave Hansen <dave@sr71.net>, dave.hansen@linux.intel.com
Subject: [PATCH 14/37] x86, pkeys: arch-specific protection bits
Date: Mon, 16 Nov 2015 19:35:30 -0800 [thread overview]
Message-ID: <20151117033529.49BA7744@viggo.jf.intel.com> (raw)
In-Reply-To: <20151117033511.BFFA1440@viggo.jf.intel.com>
From: Dave Hansen <dave.hansen@linux.intel.com>
Lots of things seem to do:
vma->vm_page_prot = vm_get_page_prot(flags);
and the ptes get created right from things we pull out
of ->vm_page_prot. So it is very convenient if we can
store the protection key in flags and vm_page_prot, just
like the existing permission bits (_PAGE_RW/PRESENT). It
greatly reduces the amount of plumbing and arch-specific
hacking we have to do in generic code.
This also takes the new PROT_PKEY{0,1,2,3} flags and
turns *those* in to VM_ flags for vma->vm_flags.
The protection key values are stored in 4 places:
1. "prot" argument to system calls
2. vma->vm_flags, filled from the mmap "prot"
3. vma->vm_page prot, filled from vma->vm_flags
4. the PTE itself.
The pseudocode for these for steps are as follows:
mmap(PROT_PKEY*)
vma->vm_flags = ... | arch_calc_vm_prot_bits(mmap_prot);
vma->vm_page_prot = ... | arch_vm_get_page_prot(vma->vm_flags);
pte = pfn | vma->vm_page_prot
Note that this provides a new definitions for x86:
arch_vm_get_page_prot()
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---
b/arch/x86/include/asm/mmu_context.h | 20 ++++++++++++++++++++
b/arch/x86/include/asm/pgtable_types.h | 12 ++++++++++--
b/arch/x86/include/uapi/asm/mman.h | 16 ++++++++++++++++
b/include/linux/mm.h | 6 ++++++
4 files changed, 52 insertions(+), 2 deletions(-)
diff -puN arch/x86/include/asm/mmu_context.h~pkeys-08-store-pkey-in-vma arch/x86/include/asm/mmu_context.h
--- a/arch/x86/include/asm/mmu_context.h~pkeys-08-store-pkey-in-vma 2015-11-16 12:35:41.410447447 -0800
+++ b/arch/x86/include/asm/mmu_context.h 2015-11-16 12:35:41.419447855 -0800
@@ -243,4 +243,24 @@ static inline void arch_unmap(struct mm_
mpx_notify_unmap(mm, vma, start, end);
}
+static inline int vma_pkey(struct vm_area_struct *vma)
+{
+ u16 pkey = 0;
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+ unsigned long vma_pkey_mask = VM_PKEY_BIT0 | VM_PKEY_BIT1 |
+ VM_PKEY_BIT2 | VM_PKEY_BIT3;
+ /*
+ * ffs is one-based, not zero-based, so bias back down by 1.
+ */
+ int vm_pkey_shift = __builtin_ffsl(vma_pkey_mask) - 1;
+ /*
+ * gcc generates better code if we do this rather than:
+ * pkey = (flags & mask) >> shift
+ */
+ pkey = (vma->vm_flags >> vm_pkey_shift) &
+ (vma_pkey_mask >> vm_pkey_shift);
+#endif
+ return pkey;
+}
+
#endif /* _ASM_X86_MMU_CONTEXT_H */
diff -puN arch/x86/include/asm/pgtable_types.h~pkeys-08-store-pkey-in-vma arch/x86/include/asm/pgtable_types.h
--- a/arch/x86/include/asm/pgtable_types.h~pkeys-08-store-pkey-in-vma 2015-11-16 12:35:41.412447537 -0800
+++ b/arch/x86/include/asm/pgtable_types.h 2015-11-16 12:35:41.419447855 -0800
@@ -111,7 +111,12 @@
#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
_PAGE_DIRTY)
-/* Set of bits not changed in pte_modify */
+/*
+ * Set of bits not changed in pte_modify. The pte's
+ * protection key is treated like _PAGE_RW, for
+ * instance, and is *not* included in this mask since
+ * pte_modify() does modify it.
+ */
#define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \
_PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY | \
_PAGE_SOFT_DIRTY)
@@ -227,7 +232,10 @@ enum page_cache_mode {
/* Extracts the PFN from a (pte|pmd|pud|pgd)val_t of a 4KB page */
#define PTE_PFN_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
-/* Extracts the flags from a (pte|pmd|pud|pgd)val_t of a 4KB page */
+/*
+ * Extracts the flags from a (pte|pmd|pud|pgd)val_t
+ * This includes the protection key value.
+ */
#define PTE_FLAGS_MASK (~PTE_PFN_MASK)
typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
diff -puN arch/x86/include/uapi/asm/mman.h~pkeys-08-store-pkey-in-vma arch/x86/include/uapi/asm/mman.h
--- a/arch/x86/include/uapi/asm/mman.h~pkeys-08-store-pkey-in-vma 2015-11-16 12:35:41.414447628 -0800
+++ b/arch/x86/include/uapi/asm/mman.h 2015-11-16 12:35:41.419447855 -0800
@@ -6,6 +6,22 @@
#define MAP_HUGE_2MB (21 << MAP_HUGE_SHIFT)
#define MAP_HUGE_1GB (30 << MAP_HUGE_SHIFT)
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+/*
+ * Take the 4 protection key bits out of the vma->vm_flags
+ * value and turn them in to the bits that we can put in
+ * to a pte.
+ *
+ * Only override these if Protection Keys are available
+ * (which is only on 64-bit).
+ */
+#define arch_vm_get_page_prot(vm_flags) __pgprot( \
+ ((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) | \
+ ((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) | \
+ ((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) | \
+ ((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
+#endif
+
#include <asm-generic/mman.h>
#endif /* _ASM_X86_MMAN_H */
diff -puN include/linux/mm.h~pkeys-08-store-pkey-in-vma include/linux/mm.h
--- a/include/linux/mm.h~pkeys-08-store-pkey-in-vma 2015-11-16 12:35:41.415447673 -0800
+++ b/include/linux/mm.h 2015-11-16 12:35:41.420447901 -0800
@@ -167,6 +167,12 @@ extern unsigned int kobjsize(const void
#if defined(CONFIG_X86)
# define VM_PAT VM_ARCH_1 /* PAT reserves whole VMA at once (x86) */
+#if defined (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS)
+# define VM_PKEY_BIT0 VM_HIGH_ARCH_0 /* A protection key is a 4-bit value */
+# define VM_PKEY_BIT1 VM_HIGH_ARCH_1
+# define VM_PKEY_BIT2 VM_HIGH_ARCH_2
+# define VM_PKEY_BIT3 VM_HIGH_ARCH_3
+#endif
#elif defined(CONFIG_PPC)
# define VM_SAO VM_ARCH_1 /* Strong Access Ordering (powerpc) */
#elif defined(CONFIG_PARISC)
_
next prev parent reply other threads:[~2015-11-17 3:35 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 3:35 [PATCH 00/37] x86: Memory Protection Keys Dave Hansen
2015-11-17 3:35 ` [PATCH 01/37] uprobes: dont pass around current->mm Dave Hansen
2015-11-17 3:35 ` [PATCH 02/37] mm, frame_vector: do not use get_user_pages_locked() Dave Hansen
2015-11-18 12:29 ` Jan Kara
2015-11-18 17:04 ` Andrea Arcangeli
2015-11-17 3:35 ` [PATCH 03/37] mm: kill get_user_pages_locked() Dave Hansen
2015-11-17 3:35 ` [PATCH 04/37] mm: simplify __get_user_pages() Dave Hansen
2015-11-17 3:35 ` [PATCH 05/37] mm, gup: introduce concept of "foreign" get_user_pages() Dave Hansen
2015-11-17 3:35 ` [PATCH 06/37] x86, fpu: add placeholder for Processor Trace XSAVE state Dave Hansen
2015-11-17 3:35 ` [PATCH 07/37] x86, pkeys: Add Kconfig option Dave Hansen
2015-11-17 3:35 ` [PATCH 08/37] x86, pkeys: cpuid bit definition Dave Hansen
2015-11-17 3:35 ` [PATCH 09/37] x86, pkeys: define new CR4 bit Dave Hansen
2015-11-17 3:35 ` [PATCH 10/37] x86, pkeys: add PKRU xsave fields and data structure(s) Dave Hansen
2015-11-27 9:23 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 11/37] x86, pkeys: PTE bits for storing protection key Dave Hansen
2015-11-17 3:35 ` [PATCH 12/37] x86, pkeys: new page fault error code bit: PF_PK Dave Hansen
2015-11-17 3:35 ` [PATCH 13/37] x86, pkeys: store protection in high VMA flags Dave Hansen
2015-11-17 3:35 ` Dave Hansen [this message]
2015-11-17 3:35 ` [PATCH 15/37] x86, pkeys: pass VMA down in to fault signal generation code Dave Hansen
2015-11-27 9:30 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 16/37] x86, pkeys: notify userspace about protection key faults Dave Hansen
2015-11-27 9:49 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 17/37] x86, pkeys: add functions to fetch PKRU Dave Hansen
2015-11-27 9:51 ` Thomas Gleixner
2015-11-30 15:51 ` Dave Hansen
2015-11-17 3:35 ` [PATCH 18/37] mm: factor out VMA fault permission checking Dave Hansen
2015-11-27 9:53 ` Thomas Gleixner
2015-11-17 3:35 ` [PATCH 19/37] x86, mm: simplify get_user_pages() PTE bit handling Dave Hansen
2015-11-27 10:12 ` Thomas Gleixner
2015-11-30 16:25 ` Dave Hansen
2015-11-17 3:35 ` [PATCH 20/37] x86, pkeys: check VMAs and PTEs for protection keys Dave Hansen
2015-11-17 3:35 ` [PATCH 21/37] mm: add gup flag to indicate "foreign" mm access Dave Hansen
2015-11-17 3:35 ` [PATCH 22/37] x86, pkeys: optimize fault handling in access_error() Dave Hansen
2015-11-17 3:35 ` [PATCH 23/37] x86, pkeys: differentiate instruction fetches Dave Hansen
2015-11-17 3:35 ` [PATCH 24/37] x86, pkeys: dump PKRU with other kernel registers Dave Hansen
2015-11-17 3:35 ` [PATCH 25/37] x86, pkeys: dump PTE pkey in /proc/pid/smaps Dave Hansen
2015-11-17 3:35 ` [PATCH 26/37] x86, pkeys: add Kconfig prompt to existing config option Dave Hansen
2015-11-17 3:35 ` [PATCH 27/37] mm, multi-arch: pass a protection key in to calc_vm_flag_bits() Dave Hansen
2015-11-17 3:35 ` [PATCH 28/37] x86, pkeys: add arch_validate_pkey() Dave Hansen
2015-11-17 3:35 ` [PATCH 29/37] mm: implement new mprotect_key() system call Dave Hansen
2015-11-17 3:35 ` [PATCH 30/37] x86, pkeys: make mprotect_key() mask off additional vm_flags Dave Hansen
2015-11-17 3:35 ` [PATCH 31/37] x86: wire up mprotect_key() system call Dave Hansen
2015-11-17 3:35 ` [PATCH 32/37] x86: separate out LDT init from context init Dave Hansen
2015-11-17 3:35 ` [PATCH 33/37] x86, fpu: allow setting of XSAVE state Dave Hansen
2015-11-17 3:35 ` [PATCH 34/37] x86, pkeys: allocation/free syscalls Dave Hansen
2015-11-17 3:36 ` [PATCH 35/37] x86, pkeys: add pkey set/get syscalls Dave Hansen
2015-11-17 3:36 ` [PATCH 36/37] x86, pkeys: actually enable Memory Protection Keys in CPU Dave Hansen
2015-11-17 3:36 ` [PATCH 37/37] x86, pkeys: Documentation Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151117033529.49BA7744@viggo.jf.intel.com \
--to=dave@sr71.net \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox