From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
Michael Schmitz <schmitzmic@gmail.com>,
<linux-m68k@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 33/71] atari_NCR5380: Set do_abort() timeouts
Date: Wed, 18 Nov 2015 19:35:28 +1100 [thread overview]
Message-ID: <20151118083504.761716828@telegraphics.com.au> (raw)
In-Reply-To: 20151118083455.331768508@telegraphics.com.au
[-- Attachment #1: atari_NCR5380-do_abort-timeouts --]
[-- Type: text/plain, Size: 4498 bytes --]
Use timeouts in do_abort() in atari_NCR5380.c instead of infinite loops.
Also fix the kernel-doc comment. Keep the two core driver forks in sync.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
drivers/scsi/NCR5380.c | 26 +++++++++++++-------------
drivers/scsi/atari_NCR5380.c | 34 +++++++++++++++++++++-------------
2 files changed, 34 insertions(+), 26 deletions(-)
Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/atari_NCR5380.c 2015-11-18 19:33:42.000000000 +1100
+++ linux/drivers/scsi/atari_NCR5380.c 2015-11-18 19:33:46.000000000 +1100
@@ -1829,19 +1829,19 @@ static void do_reset(struct Scsi_Host *i
local_irq_restore(flags);
}
-/*
- * Function : do_abort (Scsi_Host *host)
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
*
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
+ * Returns 0 on success, -1 on failure.
*/
static int do_abort(struct Scsi_Host *instance)
{
unsigned char tmp, *msgptr, phase;
int len;
+ int rc;
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1856,16 +1856,20 @@ static int do_abort(struct Scsi_Host *in
* the target sees, so we just handshake.
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- ;
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
+ if (rc < 0)
+ goto timeout;
+
+ tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- ;
+ if (tmp != PHASE_MSGOUT) {
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
+ if (rc < 0)
+ goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
@@ -1881,6 +1885,10 @@ static int do_abort(struct Scsi_Host *in
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA)
Index: linux/drivers/scsi/NCR5380.c
===================================================================
--- linux.orig/drivers/scsi/NCR5380.c 2015-11-18 19:33:45.000000000 +1100
+++ linux/drivers/scsi/NCR5380.c 2015-11-18 19:33:46.000000000 +1100
@@ -1451,16 +1451,12 @@ static void do_reset(struct Scsi_Host *i
local_irq_restore(flags);
}
-/*
- * Function : do_abort (Scsi_Host *host)
- *
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
*
- * Locks: queue lock held by caller
- * FIXME: sort this out and get new_eh running
+ * Returns 0 on success, -1 on failure.
*/
static int do_abort(struct Scsi_Host *instance)
@@ -1482,9 +1478,9 @@ static int do_abort(struct Scsi_Host *in
* the target sees, so we just handshake.
*/
- rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
if (rc < 0)
- return -1;
+ goto timeout;
tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
@@ -1493,9 +1489,9 @@ static int do_abort(struct Scsi_Host *in
if (tmp != PHASE_MSGOUT) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
if (rc < 0)
- return -1;
+ goto timeout;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
tmp = ABORT;
msgptr = &tmp;
@@ -1509,6 +1505,10 @@ static int do_abort(struct Scsi_Host *in
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
next prev parent reply other threads:[~2015-11-18 9:01 UTC|newest]
Thread overview: 182+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 8:34 [PATCH 00/71] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2015-11-18 8:34 ` [PATCH 01/71] atari_scsi: Fix SCSI host ID setting Finn Thain
2015-11-19 7:37 ` Hannes Reinecke
2015-11-18 8:34 ` [PATCH 02/71] ncr5380: Remove redundant static variable initializers Finn Thain
2015-11-19 7:37 ` Hannes Reinecke
2015-11-18 8:34 ` [PATCH 03/71] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros Finn Thain
2015-11-19 7:38 ` Hannes Reinecke
2015-11-18 8:34 ` [PATCH 04/71] ncr5380: Remove more pointless macros Finn Thain
2015-11-19 7:38 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 05/71] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2015-11-19 7:41 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 06/71] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2015-11-19 7:41 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 07/71] ncr5380: Split NCR5380_init() into two functions Finn Thain
2015-11-19 13:30 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 08/71] ncr5380: Move NCR53C400-specific code Finn Thain
2015-11-19 13:31 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 09/71] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2015-11-19 13:38 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 10/71] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2015-11-19 3:05 ` Michael Schmitz
2015-11-19 4:05 ` Finn Thain
2015-11-19 4:43 ` Michael Schmitz
2015-11-19 13:41 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 11/71] ncr5380: Simplify bus reset handlers Finn Thain
2015-11-19 13:56 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 12/71] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2015-11-19 14:13 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 13/71] ncr5380: Remove redundant register writes Finn Thain
2015-11-19 14:14 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 14/71] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2015-11-19 14:14 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 15/71] ncr5380: Always escalate bad target time-out " Finn Thain
2015-11-19 14:15 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 16/71] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2015-11-19 14:16 ` Hannes Reinecke
2015-11-18 8:35 ` [PATCH 17/71] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2015-11-18 8:35 ` [PATCH 18/71] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2015-11-18 8:35 ` [PATCH 19/71] ncr5380: Cleanup bogus {request,release}_region() calls Finn Thain
2015-11-18 8:35 ` [PATCH 20/71] ncr5380: Introduce unbound workqueue Finn Thain
2015-11-18 8:35 ` [PATCH 21/71] ncr5380: Sleep when polling, if possible Finn Thain
2015-11-18 8:35 ` [PATCH 22/71] ncr5380: Eliminate selecting state Finn Thain
2015-11-24 19:08 ` Ondrej Zary
2015-11-25 3:17 ` Finn Thain
2015-11-25 21:59 ` Ondrej Zary
2015-11-26 10:23 ` Finn Thain
2015-11-26 19:35 ` Ondrej Zary
2015-11-26 22:32 ` Finn Thain
2015-11-28 23:13 ` Ondrej Zary
2015-11-29 0:46 ` Finn Thain
2015-11-29 9:09 ` Ondrej Zary
2015-11-29 9:27 ` Geert Uytterhoeven
2015-11-29 10:25 ` Finn Thain
2015-11-29 13:50 ` Geert Uytterhoeven
2015-11-30 2:12 ` Finn Thain
2015-11-18 8:35 ` [PATCH 23/71] ncr5380: Always retry arbitration and selection Finn Thain
2015-11-18 8:35 ` [PATCH 24/71] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2015-11-18 8:35 ` [PATCH 25/71] ncr5380: Rework disconnect versus poll logic Finn Thain
2015-11-18 8:35 ` [PATCH 26/71] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2015-11-18 8:35 ` [PATCH 27/71] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2015-11-18 8:35 ` [PATCH 28/71] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2015-11-18 8:35 ` [PATCH 29/71] ncr5380: Remove references to linked commands Finn Thain
2015-11-18 8:35 ` [PATCH 30/71] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2015-11-18 8:35 ` [PATCH 31/71] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2015-11-18 8:35 ` [PATCH 32/71] ncr5380: Fix bus phase " Finn Thain
2015-11-18 8:35 ` Finn Thain [this message]
2015-11-18 8:35 ` [PATCH 34/71] atari_NCR5380: Use arbitration timeout Finn Thain
2015-11-18 8:35 ` [PATCH 35/71] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2015-11-18 8:35 ` [PATCH 36/71] ncr5380: Use work_struct instead of delayed_work Finn Thain
2015-11-18 8:35 ` [PATCH 37/71] ncr5380: Standardize work queueing algorithm Finn Thain
2015-11-18 8:35 ` [PATCH 38/71] ncr5380: Remove UNSAFE macro Finn Thain
2015-11-18 8:35 ` [PATCH 39/71] ncr5380: Standardize interrupt handling Finn Thain
2015-11-18 8:35 ` [PATCH 40/71] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2015-11-18 8:35 ` [PATCH 41/71] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2015-11-18 8:35 ` [PATCH 42/71] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2015-11-18 8:35 ` [PATCH 43/71] ncr5380: Standardize reselection handling Finn Thain
2015-11-18 8:35 ` [PATCH 44/71] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2015-11-18 8:35 ` [PATCH 45/71] ncr5380: Cleanup #include directives Finn Thain
2015-11-18 8:35 ` [PATCH 46/71] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2015-11-18 8:35 ` [PATCH 47/71] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2015-11-18 8:35 ` [PATCH 48/71] atari_NCR5380: Fix queue_size limit Finn Thain
2015-11-18 8:35 ` [PATCH 49/71] atari_NCR5380: Introduce FLAG_DTC3181E Finn Thain
2015-11-18 8:35 ` [PATCH 50/71] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2015-11-18 8:35 ` [PATCH 51/71] ncr5380: Remove command list debug code Finn Thain
2015-11-18 8:35 ` [PATCH 52/71] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2015-11-18 8:35 ` [PATCH 53/71] ncr5380: Use shost_priv helper Finn Thain
2015-11-18 8:35 ` [PATCH 54/71] ncr5380: Use dsprintk() for queue debugging Finn Thain
2015-11-18 8:35 ` [PATCH 55/71] ncr5380: Remove LIST and REMOVE macros Finn Thain
2015-11-18 8:35 ` [PATCH 56/71] ncr5380: Remove redundant volatile qualifiers Finn Thain
2015-11-18 8:35 ` [PATCH 57/71] ncr5380: Use standard list data structure Finn Thain
2015-11-18 8:35 ` [PATCH 58/71] ncr5380: Refactor command completion Finn Thain
2015-11-18 8:35 ` [PATCH 59/71] ncr5380: Fix autosense bugs Finn Thain
2015-11-18 8:35 ` [PATCH 60/71] ncr5380: Implement new eh_abort_handler Finn Thain
2015-11-18 8:35 ` [PATCH 61/71] ncr5380: Fix EH during arbitration and selection Finn Thain
2015-11-18 8:35 ` [PATCH 62/71] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2015-11-18 8:35 ` [PATCH 63/71] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2015-11-18 8:35 ` [PATCH 64/71] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2015-11-18 8:36 ` [PATCH 65/71] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2015-11-18 8:36 ` [PATCH 66/71] ncr5380: Fix soft lockups Finn Thain
2015-11-18 8:36 ` [PATCH 67/71] ncr5380: Cleanup comments Finn Thain
2015-11-18 8:36 ` [PATCH 68/71] ncr5380: Fix whitespace issues using regexp Finn Thain
2015-11-18 8:36 ` [PATCH 69/71] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2015-11-18 8:36 ` [PATCH 70/71] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2015-11-18 8:36 ` [PATCH 71/71] ncr5380: Cleanup whitespace and parentheses Finn Thain
2015-11-18 11:35 ` [PATCH 00/71] More fixes, cleanup and modernization for NCR5380 drivers Ondrej Zary
2015-11-19 2:24 ` Finn Thain
2015-11-19 2:52 ` Michael Schmitz
2015-11-19 7:48 ` Ondrej Zary
2015-11-19 22:50 ` Ondrej Zary
2015-11-20 1:41 ` Finn Thain
2015-11-20 7:21 ` Finn Thain
2015-11-20 7:33 ` Christoph Hellwig
2015-11-20 8:19 ` Finn Thain
2015-11-20 9:16 ` Ondrej Zary
2015-11-20 10:00 ` Christoph Hellwig
2015-11-20 10:53 ` Finn Thain
2015-11-20 11:40 ` Ondrej Zary
2015-11-20 11:45 ` Christoph Hellwig
2015-11-20 12:23 ` Geert Uytterhoeven
2015-11-20 12:46 ` Ondrej Zary
2015-11-20 7:35 ` Ondrej Zary
2015-11-20 18:29 ` Ondrej Zary
2015-11-21 1:58 ` Finn Thain
2015-11-21 13:01 ` Ondrej Zary
2015-11-21 23:07 ` Ondrej Zary
2015-11-21 23:32 ` Finn Thain
2015-11-23 22:55 ` Ondrej Zary
2015-11-24 1:21 ` Finn Thain
2015-11-24 8:04 ` Ondrej Zary
2015-11-24 9:13 ` Finn Thain
2015-11-24 12:03 ` Ondrej Zary
2015-11-24 18:04 ` Ondrej Zary
2015-11-24 21:40 ` Ondrej Zary
2015-11-25 2:10 ` Finn Thain
2015-11-25 9:04 ` Ondrej Zary
2015-11-25 11:50 ` Finn Thain
2015-11-25 23:01 ` Ondrej Zary
2015-11-25 21:34 ` [PATCH 72/71] ncr5380: Fix pseudo-DMA Ondrej Zary
2015-11-29 9:39 ` [RFC PATCH 73/71] ncr5380: Use runtime register mapping Ondrej Zary
2015-11-30 11:50 ` Finn Thain
2015-11-29 9:39 ` [RFC PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A Ondrej Zary
2015-11-30 11:52 ` Finn Thain
2015-11-30 12:04 ` Finn Thain
2015-11-30 13:40 ` Ondrej Zary
2015-12-06 3:20 ` Finn Thain
2015-11-29 10:01 ` [RFC PATCH 75/71] ncr5380: Remove FLAG_DTC3181E Ondrej Zary
2015-11-30 4:56 ` Finn Thain
2015-12-03 23:03 ` [RFC PATCH 76/71] ncr5380: Enable PDMA for DTC chips Ondrej Zary
2015-12-04 0:12 ` Julian Calaby
2015-12-04 8:38 ` Finn Thain
2015-12-05 1:32 ` Julian Calaby
2015-12-05 2:12 ` Finn Thain
2015-12-05 2:38 ` Julian Calaby
2015-12-04 9:08 ` Finn Thain
2015-12-04 9:32 ` Ondrej Zary
2015-12-04 9:20 ` Finn Thain
2015-12-03 23:03 ` [RFC PATCH 77/71] ncr5380: Fix wait for 53C80 registers registers after PDMA Ondrej Zary
2015-12-04 21:00 ` [PATCH 73/71] ncr5380: Use runtime register mapping Ondrej Zary
2015-12-06 3:39 ` Finn Thain
2015-12-06 8:42 ` Geert Uytterhoeven
2015-12-04 21:02 ` [PATCH 74/71] ncr5380: Enable PDMA for NCR53C400A Ondrej Zary
2015-12-06 3:41 ` Finn Thain
2015-12-04 21:17 ` [PATCH 76/71] ncr5380: Enable PDMA for DTC chips Ondrej Zary
2015-12-06 3:40 ` Finn Thain
2015-12-06 22:47 ` Ondrej Zary
2015-12-05 21:18 ` [RFC PATCH 78/71] ncr5380: Add support for HP 53C400A-based cards (C2502) Ondrej Zary
2015-12-06 3:39 ` Finn Thain
2015-12-06 22:20 ` [PATCH v2 73/71] ncr5380: Use runtime register mapping Ondrej Zary
2015-12-06 22:21 ` [PATCH v2 74/71] ncr5380: Enable PDMA for NCR53C400A Ondrej Zary
2015-12-08 2:05 ` Finn Thain
2015-12-09 13:39 ` Ondrej Zary
2015-12-10 23:39 ` Finn Thain
2015-12-06 22:55 ` [PATCH v2 76/71] ncr5380: Enable PDMA for DTC chips Ondrej Zary
2015-12-06 23:17 ` [PATCH v2 77/71] ncr5380: Fix wait for 53C80 registers registers after PDMA Ondrej Zary
2015-12-07 3:16 ` Finn Thain
2015-12-07 8:08 ` Ondrej Zary
2015-12-06 23:20 ` [PATCH v3 76/71] ncr5380: Enable PDMA for DTC chips Ondrej Zary
2015-12-08 7:51 ` [PATCH v2 78/71] ncr5380: Add support for HP 53C400A-based cards (C2502) Ondrej Zary
2015-12-08 11:40 ` Finn Thain
2015-12-09 11:33 ` Ondrej Zary
2015-12-10 23:38 ` Finn Thain
2015-12-09 12:11 ` [PATCH v3 " Ondrej Zary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151118083504.761716828@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).