* [PATCH v4 3/5] clk: qcom: Add support for RPM Clocks
2015-11-19 13:57 [PATCH v4 0/5] Add initial support for RPM clocks Georgi Djakov
2015-11-19 13:57 ` [PATCH v4 1/5] clk: qcom: msm8916: Move xo and sleep clocks into DT Georgi Djakov
2015-11-19 13:57 ` [PATCH v4 2/5] arm64: dts: qcom: msm8916: Add fixed rate on-board oscillator Georgi Djakov
@ 2015-11-19 13:57 ` Georgi Djakov
2015-11-19 13:57 ` [PATCH v4 4/5] clk: qcom: Add RPM clock controller driver Georgi Djakov
2015-11-19 13:58 ` [PATCH v4 5/5] arm64: dts: qcom: msm8916: Add RPMCC DT node Georgi Djakov
4 siblings, 0 replies; 12+ messages in thread
From: Georgi Djakov @ 2015-11-19 13:57 UTC (permalink / raw)
To: sboyd, agross
Cc: mturquette, linux-clk, bjorn.andersson, linux-kernel,
linux-arm-msm, georgi.djakov
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor found on some Qualcomm SoCs.
The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.
This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/clk/qcom/Kconfig | 3 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-smd-rpm.c | 263 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-smd-rpm.h | 142 ++++++++++++++++++++++
4 files changed, 409 insertions(+)
create mode 100644 drivers/clk/qcom/clk-smd-rpm.c
create mode 100644 drivers/clk/qcom/clk-smd-rpm.h
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index ee4c83aab4f4..f06a331e9a24 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1,3 +1,6 @@
+config QCOM_CLK_SMD_RPM
+ bool
+
config QCOM_GDSC
bool
select PM_GENERIC_DOMAINS if PM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index fe6252349e55..b0bc0d3d585f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -9,6 +9,7 @@ clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
clk-qcom-y += clk-regmap-mux.o
clk-qcom-y += reset.o
+clk-qcom-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
new file mode 100644
index 000000000000..44c59bbad1ce
--- /dev/null
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include "clk-smd-rpm.h"
+
+#define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
+
+static DEFINE_MUTEX(rpm_clk_lock);
+
+static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
+ unsigned long value)
+{
+ struct clk_smd_rpm_req req = {
+ .key = cpu_to_le32(r->rpm_key),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(DIV_ROUND_UP(value, 1000)), /* to kHz */
+ };
+
+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ r->rpm_res_type, r->rpm_clk_id, &req,
+ sizeof(req));
+}
+
+static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
+ unsigned long value)
+{
+ struct clk_smd_rpm_req req = {
+ .key = cpu_to_le32(r->rpm_key),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(DIV_ROUND_UP(value, 1000)), /* to kHz */
+ };
+
+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
+ r->rpm_res_type, r->rpm_clk_id, &req,
+ sizeof(req));
+}
+
+static void to_active_sleep(struct clk_smd_rpm *r, unsigned long rate,
+ unsigned long *active, unsigned long *sleep)
+{
+ *active = rate;
+
+ /*
+ * Active-only clocks don't care what the rate is during sleep. So,
+ * they vote for zero.
+ */
+ if (r->active_only)
+ *sleep = 0;
+ else
+ *sleep = *active;
+}
+
+static int clk_smd_rpm_prepare(struct clk_hw *hw)
+{
+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+ struct clk_smd_rpm *peer = r->peer;
+ unsigned long this_rate = 0, this_sleep_rate = 0;
+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
+ unsigned long active_rate, sleep_rate;
+ int ret = 0;
+
+ mutex_lock(&rpm_clk_lock);
+
+ /* Don't send requests to the RPM if the rate has not been set. */
+ if (!r->rate)
+ goto out;
+
+ to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate);
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ if (peer->enabled)
+ to_active_sleep(peer, peer->rate,
+ &peer_rate, &peer_sleep_rate);
+
+ active_rate = max(this_rate, peer_rate);
+
+ if (r->branch)
+ active_rate = !!active_rate;
+
+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
+ if (ret)
+ goto out;
+
+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
+ if (r->branch)
+ sleep_rate = !!sleep_rate;
+
+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+ if (ret)
+ /* Undo the active set vote and restore it */
+ ret = clk_smd_rpm_set_rate_active(r, peer_rate);
+
+out:
+ if (!ret)
+ r->enabled = true;
+
+ mutex_unlock(&rpm_clk_lock);
+
+ return ret;
+}
+
+static void clk_smd_rpm_unprepare(struct clk_hw *hw)
+{
+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+ struct clk_smd_rpm *peer = r->peer;
+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
+ unsigned long active_rate, sleep_rate;
+ int ret;
+
+ mutex_lock(&rpm_clk_lock);
+
+ if (!r->rate)
+ goto out;
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ if (peer->enabled)
+ to_active_sleep(peer, peer->rate, &peer_rate,
+ &peer_sleep_rate);
+
+ active_rate = r->branch ? !!peer_rate : peer_rate;
+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
+ if (ret)
+ goto out;
+
+ sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate;
+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+ if (ret)
+ goto out;
+
+ r->enabled = false;
+
+out:
+ mutex_unlock(&rpm_clk_lock);
+}
+
+static int clk_smd_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+ struct clk_smd_rpm *peer = r->peer;
+ unsigned long active_rate, sleep_rate;
+ unsigned long this_rate = 0, this_sleep_rate = 0;
+ unsigned long peer_rate = 0, peer_sleep_rate = 0;
+ int ret = 0;
+
+ mutex_lock(&rpm_clk_lock);
+
+ if (!r->enabled)
+ goto out;
+
+ to_active_sleep(r, rate, &this_rate, &this_sleep_rate);
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ if (peer->enabled)
+ to_active_sleep(peer, peer->rate,
+ &peer_rate, &peer_sleep_rate);
+
+ active_rate = max(this_rate, peer_rate);
+ ret = clk_smd_rpm_set_rate_active(r, active_rate);
+ if (ret)
+ goto out;
+
+ sleep_rate = max(this_sleep_rate, peer_sleep_rate);
+ ret = clk_smd_rpm_set_rate_sleep(r, sleep_rate);
+ if (ret)
+ goto out;
+
+ r->rate = rate;
+
+out:
+ mutex_unlock(&rpm_clk_lock);
+
+ return ret;
+}
+
+static long clk_smd_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * RPM handles rate rounding and we don't have a way to
+ * know what the rate will be, so just return whatever
+ * rate is requested.
+ */
+ return rate;
+}
+
+static unsigned long clk_smd_rpm_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+
+ /*
+ * RPM handles rate rounding and we don't have a way to
+ * know what the rate will be, so just return whatever
+ * rate was set.
+ */
+ return r->rate;
+}
+
+int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
+{
+ int ret;
+ struct clk_smd_rpm_req req = {
+ .key = cpu_to_le32(QCOM_RPM_SMD_KEY_ENABLE),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(1),
+ };
+
+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_SLEEP_STATE,
+ QCOM_SMD_RPM_MISC_CLK,
+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
+ if (ret) {
+ pr_err("RPM clock scaling (sleep set) not enabled!\n");
+ return ret;
+ }
+
+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ QCOM_SMD_RPM_MISC_CLK,
+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
+ if (ret) {
+ pr_err("RPM clock scaling (active set) not enabled!\n");
+ return ret;
+ }
+
+ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(clk_smd_rpm_enable_scaling);
+
+const struct clk_ops clk_smd_rpm_ops = {
+ .prepare = clk_smd_rpm_prepare,
+ .unprepare = clk_smd_rpm_unprepare,
+ .set_rate = clk_smd_rpm_set_rate,
+ .round_rate = clk_smd_rpm_round_rate,
+ .recalc_rate = clk_smd_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_smd_rpm_ops);
+
+const struct clk_ops clk_smd_rpm_branch_ops = {
+ .prepare = clk_smd_rpm_prepare,
+ .unprepare = clk_smd_rpm_unprepare,
+ .round_rate = clk_smd_rpm_round_rate,
+ .recalc_rate = clk_smd_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_smd_rpm_branch_ops);
diff --git a/drivers/clk/qcom/clk-smd-rpm.h b/drivers/clk/qcom/clk-smd-rpm.h
new file mode 100644
index 000000000000..5cdefc30beb7
--- /dev/null
+++ b/drivers/clk/qcom/clk-smd-rpm.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_SMD_RPM_H__
+#define __QCOM_CLK_SMD_RPM_H__
+
+#include <linux/clk-provider.h>
+
+#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
+#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
+#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
+#define QCOM_RPM_SMD_KEY_STATE 0x54415453
+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
+
+struct qcom_smd_rpm;
+
+struct clk_smd_rpm {
+ const int rpm_res_type;
+ const int rpm_key;
+ const int rpm_clk_id;
+ const int rpm_status_id;
+ const bool active_only;
+ bool enabled;
+ bool branch;
+ struct clk_smd_rpm *peer;
+ struct clk_hw hw;
+ unsigned long rate;
+ struct qcom_smd_rpm *rpm;
+};
+
+struct clk_smd_rpm_req {
+ __le32 key;
+ __le32 nbytes;
+ __le32 value;
+};
+
+extern const struct clk_ops clk_smd_rpm_ops;
+extern const struct clk_ops clk_smd_rpm_branch_ops;
+int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm);
+
+#define __DEFINE_CLK_SMD_RPM(_name, active, type, r_id, stat_id, dep, key) \
+ static struct clk_smd_rpm active; \
+ static struct clk_smd_rpm _name = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &active, \
+ .rate = INT_MAX, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_smd_rpm_ops, \
+ .name = #_name, \
+ .parent_names = (const char *[]){ "xo_board" }, \
+ .num_parents = 1, \
+ }, \
+ }; \
+ static struct clk_smd_rpm active = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &_name, \
+ .active_only = true, \
+ .rate = INT_MAX, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_smd_rpm_ops, \
+ .name = #active, \
+ .parent_names = (const char *[]){ "xo_board" }, \
+ .num_parents = 1, \
+ }, \
+ };
+
+#define __DEFINE_CLK_SMD_RPM_BRANCH(_name, active, type, r_id, stat_id, r, \
+ key) \
+ static struct clk_smd_rpm active; \
+ static struct clk_smd_rpm _name = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &active, \
+ .branch = true, \
+ .rate = (r), \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_smd_rpm_branch_ops, \
+ .name = #_name, \
+ .parent_names = (const char *[]){ "xo_board" }, \
+ .num_parents = 1, \
+ }, \
+ }; \
+ static struct clk_smd_rpm active = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &_name, \
+ .active_only = true, \
+ .branch = true, \
+ .rate = (r), \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_smd_rpm_branch_ops, \
+ .name = #active, \
+ .parent_names = (const char *[]){ "xo_board" }, \
+ .num_parents = 1, \
+ }, \
+ };
+
+#define DEFINE_CLK_SMD_RPM(_name, active, type, r_id, dep) \
+ __DEFINE_CLK_SMD_RPM(_name, active, type, r_id, 0, dep, \
+ QCOM_RPM_SMD_KEY_RATE)
+
+#define DEFINE_CLK_SMD_RPM_BRANCH(_name, active, type, r_id, r) \
+ __DEFINE_CLK_SMD_RPM_BRANCH(_name, active, type, r_id, 0, r, \
+ QCOM_RPM_SMD_KEY_ENABLE)
+
+#define DEFINE_CLK_SMD_RPM_QDSS(_name, active, type, r_id) \
+ __DEFINE_CLK_SMD_RPM(_name, active, type, r_id, \
+ 0, 0, QCOM_RPM_SMD_KEY_STATE)
+
+#define DEFINE_CLK_SMD_RPM_XO_BUFFER(_name, active, r_id) \
+ __DEFINE_CLK_SMD_RPM_BRANCH(_name, active, \
+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
+ QCOM_RPM_KEY_SOFTWARE_ENABLE)
+
+#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_name, active, r_id) \
+ __DEFINE_CLK_SMD_RPM_BRANCH(_name, active, \
+ QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000, \
+ QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
+
+#endif
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 4/5] clk: qcom: Add RPM clock controller driver
2015-11-19 13:57 [PATCH v4 0/5] Add initial support for RPM clocks Georgi Djakov
` (2 preceding siblings ...)
2015-11-19 13:57 ` [PATCH v4 3/5] clk: qcom: Add support for RPM Clocks Georgi Djakov
@ 2015-11-19 13:57 ` Georgi Djakov
2015-11-21 0:39 ` Stephen Boyd
2015-11-19 13:58 ` [PATCH v4 5/5] arm64: dts: qcom: msm8916: Add RPMCC DT node Georgi Djakov
4 siblings, 1 reply; 12+ messages in thread
From: Georgi Djakov @ 2015-11-19 13:57 UTC (permalink / raw)
To: sboyd, agross
Cc: mturquette, linux-clk, bjorn.andersson, linux-kernel,
linux-arm-msm, georgi.djakov
Add support for clocks that are controlled by the RPM processor
on Qualcomm msm8916 based platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
.../devicetree/bindings/clock/qcom,rpmcc.txt | 35 ++++
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/rpmcc.c | 206 ++++++++++++++++++++
include/dt-bindings/clock/qcom,rpmcc-msm8916.h | 44 +++++
5 files changed, 294 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
create mode 100644 drivers/clk/qcom/rpmcc.c
create mode 100644 include/dt-bindings/clock/qcom,rpmcc-msm8916.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
new file mode 100644
index 000000000000..bd0fd0cd50dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -0,0 +1,35 @@
+Qualcomm RPM Clock Controller Binding
+------------------------------------------------
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+ "qcom,rpmcc-msm8916"
+
+- #clock-cells : shall contain 1
+
+Example:
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: qcom,rpmcc {
+ compatible = "qcom,rpmcc-msm8916";
+ #clock-cells = <1>;
+ };
+ };
+ };
+ };
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index f06a331e9a24..29aaebcdeffa 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -12,6 +12,14 @@ config COMMON_CLK_QCOM
select REGMAP_MMIO
select RESET_CONTROLLER
+config QCOM_RPMCC
+ tristate "Qualcomm RPM Clock Controller"
+ depends on QCOM_SMD_RPM && COMMON_CLK_QCOM
+ select QCOM_CLK_SMD_RPM
+ help
+ Support for the clocks exposed by the Resource Power Manager
+ processor on devices like apq8016, apq8084 and msm8974.
+
config APQ_GCC_8084
tristate "APQ8084 Global Clock Controller"
select QCOM_GDSC
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index b0bc0d3d585f..e58a567ddb42 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@ clk-qcom-y += clk-regmap-mux.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
+clk-qcom-$(CONFIG_QCOM_RPMCC) += rpmcc.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
diff --git a/drivers/clk/qcom/rpmcc.c b/drivers/clk/qcom/rpmcc.c
new file mode 100644
index 000000000000..55d74a808356
--- /dev/null
+++ b/drivers/clk/qcom/rpmcc.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include "clk-smd-rpm.h"
+#include <dt-bindings/clock/qcom,rpmcc-msm8916.h>
+
+#define CXO_ID 0x0
+#define QDSS_ID 0x1
+#define BUS_SCALING 0x2
+
+#define PCNOC_ID 0x0
+#define SNOC_ID 0x1
+#define BIMC_ID 0x0
+
+#define BB_CLK1_ID 0x1
+#define BB_CLK2_ID 0x2
+#define RF_CLK1_ID 0x4
+#define RF_CLK2_ID 0x5
+
+struct rpm_cc {
+ struct qcom_rpm *rpm;
+ struct clk_onecell_data data;
+ struct clk *clks[];
+};
+
+/* SMD clocks */
+DEFINE_CLK_SMD_RPM(pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, PCNOC_ID, NULL);
+DEFINE_CLK_SMD_RPM(snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, SNOC_ID, NULL);
+DEFINE_CLK_SMD_RPM(bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, BIMC_ID, NULL);
+
+DEFINE_CLK_SMD_RPM_BRANCH(xo, xo_a, QCOM_SMD_RPM_MISC_CLK, CXO_ID, 19200000);
+DEFINE_CLK_SMD_RPM_QDSS(qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, QDSS_ID);
+
+/* SMD_XO_BUFFER */
+DEFINE_CLK_SMD_RPM_XO_BUFFER(bb_clk1, bb_clk1_a, BB_CLK1_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(bb_clk2, bb_clk2_a, BB_CLK2_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(rf_clk1, rf_clk1_a, RF_CLK1_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(rf_clk2, rf_clk2_a, RF_CLK2_ID);
+
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(bb_clk1_pin, bb_clk1_a_pin, BB_CLK1_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(bb_clk2_pin, bb_clk2_a_pin, BB_CLK2_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(rf_clk1_pin, rf_clk1_a_pin, RF_CLK1_ID);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(rf_clk2_pin, rf_clk2_a_pin, RF_CLK2_ID);
+
+static struct clk_smd_rpm *rpmcc_msm8916_clks[] = {
+ [RPM_XO_CLK_SRC] = &xo,
+ [RPM_XO_A_CLK_SRC] = &xo_a,
+ [RPM_PCNOC_CLK] = &pcnoc_clk,
+ [RPM_PCNOC_A_CLK] = &pcnoc_a_clk,
+ [RPM_SNOC_CLK] = &snoc_clk,
+ [RPM_SNOC_A_CLK] = &snoc_a_clk,
+ [RPM_BIMC_CLK] = &bimc_clk,
+ [RPM_BIMC_A_CLK] = &bimc_a_clk,
+ [RPM_QDSS_CLK] = &qdss_clk,
+ [RPM_QDSS_A_CLK] = &qdss_a_clk,
+ [RPM_BB_CLK1] = &bb_clk1,
+ [RPM_BB_CLK1_A] = &bb_clk1_a,
+ [RPM_BB_CLK2] = &bb_clk2,
+ [RPM_BB_CLK2_A] = &bb_clk2_a,
+ [RPM_RF_CLK1] = &rf_clk1,
+ [RPM_RF_CLK1_A] = &rf_clk1_a,
+ [RPM_RF_CLK2] = &rf_clk2,
+ [RPM_RF_CLK2_A] = &rf_clk2_a,
+ [RPM_BB_CLK1_PIN] = &bb_clk1_pin,
+ [RPM_BB_CLK1_A_PIN] = &bb_clk1_a_pin,
+ [RPM_BB_CLK2_PIN] = &bb_clk2_pin,
+ [RPM_BB_CLK2_A_PIN] = &bb_clk2_a_pin,
+ [RPM_RF_CLK1_PIN] = &rf_clk1_pin,
+ [RPM_RF_CLK1_A_PIN] = &rf_clk1_a_pin,
+ [RPM_RF_CLK2_PIN] = &rf_clk2_pin,
+ [RPM_RF_CLK2_A_PIN] = &rf_clk2_a_pin,
+};
+
+struct rpmcc_desc {
+ struct clk_smd_rpm **clks;
+ size_t num_clks;
+};
+
+static const struct rpmcc_desc rpmcc_msm8916 = {
+ .clks = rpmcc_msm8916_clks,
+ .num_clks = ARRAY_SIZE(rpmcc_msm8916_clks),
+};
+
+static const struct of_device_id rpmcc_match_table[] = {
+ { .compatible = "qcom,rpmcc-msm8916", .data = &rpmcc_msm8916},
+ { }
+};
+MODULE_DEVICE_TABLE(of, rpmcc_match_table);
+
+static int rpmcc_probe(struct platform_device *pdev)
+{
+ struct clk **clks;
+ struct clk *clk;
+ struct clk_smd_rpm **rpm_clks;
+ struct rpm_cc *rcc;
+ const struct rpmcc_desc *desc;
+ struct qcom_smd_rpm *rpm;
+ struct clk_onecell_data *data;
+ int ret, i;
+ size_t num_clks;
+
+ rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
+
+ rpm_clks = desc->clks;
+ num_clks = desc->num_clks;
+
+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
+ GFP_KERNEL);
+ if (!rcc)
+ return -ENOMEM;
+
+ clks = rcc->clks;
+ data = &rcc->data;
+ data->clks = clks;
+ data->clk_num = num_clks;
+
+ for (i = 0; i < num_clks; i++) {
+ if (!rpm_clks[i]) {
+ clks[i] = ERR_PTR(-ENOENT);
+ continue;
+ }
+
+ rpm_clks[i]->rpm = rpm;
+ clk = devm_clk_register(&pdev->dev, &rpm_clks[i]->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ clks[i] = clk;
+ }
+
+ ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+ data);
+ if (ret)
+ goto err;
+
+ ret = clk_smd_rpm_enable_scaling(rpm);
+ if (ret) {
+ of_clk_del_provider(pdev->dev.of_node);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ dev_err(&pdev->dev, "Error registering RPMCC driver (%d)\n", ret);
+ return ret;
+}
+
+static int rpmcc_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+ return 0;
+}
+
+static struct platform_driver rpmcc_driver = {
+ .driver = {
+ .name = "qcom-rpmcc",
+ .of_match_table = rpmcc_match_table,
+ },
+ .probe = rpmcc_probe,
+ .remove = rpmcc_remove,
+};
+
+static int __init rpmcc_init(void)
+{
+ return platform_driver_register(&rpmcc_driver);
+}
+core_initcall(rpmcc_init);
+
+static void __exit rpmcc_exit(void)
+{
+ platform_driver_unregister(&rpmcc_driver);
+}
+module_exit(rpmcc_exit);
+
+MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rpmcc");
diff --git a/include/dt-bindings/clock/qcom,rpmcc-msm8916.h b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h
new file mode 100644
index 000000000000..62d63940896a
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2015 Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_8916_H
+#define _DT_BINDINGS_CLK_MSM_RPMCC_8916_H
+
+#define RPM_XO_CLK_SRC 0
+#define RPM_XO_A_CLK_SRC 1
+#define RPM_PCNOC_CLK 2
+#define RPM_PCNOC_A_CLK 3
+#define RPM_SNOC_CLK 4
+#define RPM_SNOC_A_CLK 6
+#define RPM_BIMC_CLK 7
+#define RPM_BIMC_A_CLK 8
+#define RPM_QDSS_CLK 9
+#define RPM_QDSS_A_CLK 10
+#define RPM_BB_CLK1 11
+#define RPM_BB_CLK1_A 12
+#define RPM_BB_CLK2 13
+#define RPM_BB_CLK2_A 14
+#define RPM_RF_CLK1 15
+#define RPM_RF_CLK1_A 16
+#define RPM_RF_CLK2 17
+#define RPM_RF_CLK2_A 18
+#define RPM_BB_CLK1_PIN 19
+#define RPM_BB_CLK1_A_PIN 20
+#define RPM_BB_CLK2_PIN 21
+#define RPM_BB_CLK2_A_PIN 22
+#define RPM_RF_CLK1_PIN 23
+#define RPM_RF_CLK1_A_PIN 24
+#define RPM_RF_CLK2_PIN 25
+#define RPM_RF_CLK2_A_PIN 26
+
+#endif
^ permalink raw reply related [flat|nested] 12+ messages in thread