Re: [PATCH v2 4/5] dt-bindings: document sun8i_ths

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1: Type: text/plain, Size: 1239 bytes --]

Hi,

On Mon, Nov 23, 2015 at 09:02:51AM +0100, Josef Gajdusek wrote:
> This patch adds the binding documentation for the sun8i_ths driver
> 
> Signed-off-by: Josef Gajdusek <atx@atx.name>
> ---
>  .../devicetree/bindings/thermal/sun8i-ths.txt      | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
> 
> diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
> new file mode 100644
> index 0000000..67056bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
> @@ -0,0 +1,31 @@
> +* sun8i THS
> +
> +Required properties:
> +- compatible : "allwinner,sun8i-h3-ths"
> +- reg : Address range of the thermal registers and location of the calibration
> +        value
> +- resets : Must contain an entry for each entry in reset-names.
> +           see ../reset/reset.txt for details
> +- reset-names : Must include the name "ahb"

If you have a single reset line, you don't need reset-names.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]