Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver

[Thierry Reding <treding@nvidia.com>]

[-- Attachment #1: Type: text/plain, Size: 2143 bytes --]

On Thu, Nov 26, 2015 at 03:03:54PM +0800, Chris Zhong wrote:
> Hi Thierry
> 
> Thanks for your feedback.
> 
> 
> On 11/21/2015 12:07 AM, Thierry Reding wrote:
> >On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
> >>add Synopsys DesignWare MIPI DSI host controller driver support.
> >>
> >>Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> >>---
> >>
> >>Changes in v4:
> >>eliminate some warnning
> >>
> >>Changes in v3: None
> >>Changes in v2: None
> >>
> >>  drivers/gpu/drm/bridge/Kconfig       |   11 +
> >>  drivers/gpu/drm/bridge/Makefile      |    1 +
> >>  drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
> >>  include/drm/bridge/dw_mipi_dsi.h     |   27 +
> >>  4 files changed, 1095 insertions(+)
> >>  create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
> >>  create mode 100644 include/drm/bridge/dw_mipi_dsi.h
> >>
> >>
> >>+struct dw_mipi_dsi {
> >>+	struct mipi_dsi_host dsi_host;
> >>+	struct drm_connector connector;
> >>+	struct drm_encoder *encoder;
> >struct drm_bridge already has a pointer to an encoder, can't you reuse
> >that instead?
> >
> >>+	struct drm_bridge *bridge;
> >Typically you'd embed the bridge into the driver structure.
> I'm almost done with all the modifications according to your comments.
> Remaining this point I can not understand, the dsi is a pointer of
> drm_bridge,
> hence I can not get the bridge by container_of.
> Although, the "bridge->driver_private = dsi" have done in
> dw_mipi_dsi_register.

I don't understand. If you don't make bridge a pointer, but rather embed
it within the structure, then you can use container_of(), can't you? You
get it allocated automatically as part of allocating the dw_mipi_dsi
structure. See for example the ps8622 and ptn3460 bridge drivers.

On a slightly unrelated note, I'm not sure if we discussed this already
or if it was in another thread, but why is this even a bridge driver? A
bridge is typically some IC outside of the SoC, whereas this clearly is
IP designed into the SoC. So it's really more of an encoder rather than
a bridge.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]