From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753238AbbLDORN (ORCPT ); Fri, 4 Dec 2015 09:17:13 -0500 Received: from mx0a-0016f401.pphosted.com ([67.231.148.174]:6186 "EHLO mx0a-0016f401.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753127AbbLDORI (ORCPT ); Fri, 4 Dec 2015 09:17:08 -0500 Date: Fri, 4 Dec 2015 22:13:03 +0800 From: Jisheng Zhang To: , CC: , , Subject: Re: [PATCH 0/7] usb: xhci-plat: support generic PHY and vbus regulator Message-ID: <20151204221303.61f40fd0@xhacker> In-Reply-To: <1449238252-5630-1-git-send-email-jszhang@marvell.com> References: <1449238252-5630-1-git-send-email-jszhang@marvell.com> X-Mailer: Claws Mail 3.13.0 (GTK+ 2.24.28; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2015-12-04_06:,, signatures=0 X-Proofpoint-Spam-Details: rule=inbound_notspam policy=inbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1507310000 definitions=main-1512040239 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org cc linux-usb@vger.kernel.org Sorry, I forget to do so. Will cc linux-usb in the future. On Fri, 4 Dec 2015 22:10:45 +0800 Jisheng Zhang wrote: > The Marvell BG4CT has xhci controller. This controller has two phys: > one for usb2 and another for usb3. BG4CT boards have board level vbus > control through gpio. > > I plan to add the xhci support in two steps: first of all, add generic > PHY and vbus regulator control support to the xhci-plat driver. Then > add the usb2 and usb3 phy drivers, after that, we add the phy and xhci > nodes in the dtsi. > > This series takes the first step. The first three patches are bug fix. > Then two clean up patches. The last two patches add generic PHY and > vbus regulator control support. > > > Jisheng Zhang (7): > usb: xhci: plat: Fix suspend/resume when the optional clk exists > usb: xhci: plat: attach the usb_phy to the correct hcd > usb: xhci: plat: Fix suspend/resume when the optional usb_phy exists > usb: xhci: plat: sort the headers in alphabetic order > usb: xhci: plat: Remove checks for optional clock in error/remove path > usb: xhci: plat: add generic PHY support > usb: xhci: plat: add vbus regulator control > > drivers/usb/host/xhci-plat.c | 159 +++++++++++++++++++++++++++++++++++++------ > drivers/usb/host/xhci.h | 2 + > 2 files changed, 140 insertions(+), 21 deletions(-) >