From: Finn Thain <fthain@telegraphics.com.au>
To: "James E.J. Bottomley" <JBottomley@odin.com>,
Michael Schmitz <schmitzmic@gmail.com>,
<linux-m68k@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 03/72] ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros
Date: Sun, 06 Dec 2015 12:31:29 +1100 [thread overview]
Message-ID: <20151206013127.745551474@telegraphics.com.au> (raw)
In-Reply-To: 20151206013126.995379403@telegraphics.com.au
[-- Attachment #1: ncr5380-remove-TDEBUG-DTCDEBUG-PDEBUG --]
[-- Type: text/plain, Size: 10021 bytes --]
Replace {P,T,DTC}DEBUG_INIT with NDEBUG_INIT. Remove dead debugging
code, including code that's conditional upon *DEBUG_TRANSFER.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
---
drivers/scsi/dtc.c | 18 ++++++------------
drivers/scsi/dtc.h | 27 ---------------------------
drivers/scsi/pas16.c | 21 +++++++--------------
drivers/scsi/pas16.h | 16 ----------------
drivers/scsi/t128.c | 18 ++++++------------
drivers/scsi/t128.h | 16 ----------------
6 files changed, 19 insertions(+), 97 deletions(-)
Index: linux/drivers/scsi/dtc.c
===================================================================
--- linux.orig/drivers/scsi/dtc.c 2015-12-06 12:29:19.000000000 +1100
+++ linux/drivers/scsi/dtc.c 2015-12-06 12:29:21.000000000 +1100
@@ -205,9 +205,8 @@ static int __init dtc_detect(struct scsi
addr = 0;
} else
for (; !addr && (current_base < NO_BASES); ++current_base) {
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n",
+ (unsigned int)bases[current_base].address);
if (bases[current_base].noauto)
continue;
base = ioremap(bases[current_base].address, 0x2000);
@@ -216,18 +215,14 @@ static int __init dtc_detect(struct scsi
for (sig = 0; sig < NO_SIGNATURES; ++sig) {
if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) {
addr = bases[current_base].address;
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "dtc: detected board\n");
goto found;
}
}
iounmap(base);
}
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr);
if (!addr)
break;
@@ -271,9 +266,8 @@ found:
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
instance->irq = NO_IRQ;
#endif
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/dtc.h
===================================================================
--- linux.orig/drivers/scsi/dtc.h 2015-12-06 12:29:18.000000000 +1100
+++ linux/drivers/scsi/dtc.h 2015-12-06 12:29:21.000000000 +1100
@@ -10,10 +10,6 @@
#ifndef DTC3280_H
#define DTC3280_H
-#define DTCDEBUG 0
-#define DTCDEBUG_INIT 0x1
-#define DTCDEBUG_TRANSFER 0x2
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
@@ -33,31 +29,8 @@
#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
-#define dbNCR5380_read(reg) \
- (rval=readb(DTC_address(reg)), \
- (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\
- , (reg), DTC_address(reg), rval)), rval ) )
-
-#define dbNCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-
-
-#if !(DTCDEBUG & DTCDEBUG_TRANSFER)
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
-#else
-#define NCR5380_read(reg) (readb(DTC_address(reg)))
-#define xNCR5380_read(reg) \
- (((unsigned char) printk("DTC : read register %d at address %p\n"\
- , (reg), DTC_address(reg))), readb(DTC_address(reg)))
-
-#define NCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-#endif
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
Index: linux/drivers/scsi/pas16.c
===================================================================
--- linux.orig/drivers/scsi/pas16.c 2015-12-06 12:29:19.000000000 +1100
+++ linux/drivers/scsi/pas16.c 2015-12-06 12:29:21.000000000 +1100
@@ -1,6 +1,5 @@
#define PSEUDO_DMA
#define UNSAFE /* Not unsafe for PAS16 -- use it */
-#define PDEBUG 0
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
@@ -377,23 +376,18 @@ static int __init pas16_detect(struct sc
}
else
for (; !io_port && (current_base < NO_BASES); ++current_base) {
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n",
+ (unsigned int)bases[current_base].io_port);
if ( !bases[current_base].noauto &&
pas16_hw_detect( current_base ) ){
io_port = bases[current_base].io_port;
init_board( io_port, default_irqs[ current_base ], 0 );
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "pas16: detected board\n");
}
}
-
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n",
+ (unsigned int)io_port);
if (!io_port)
break;
@@ -431,9 +425,8 @@ static int __init pas16_detect(struct sc
outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 );
}
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/pas16.h
===================================================================
--- linux.orig/drivers/scsi/pas16.h 2015-12-06 12:29:18.000000000 +1100
+++ linux/drivers/scsi/pas16.h 2015-12-06 12:29:21.000000000 +1100
@@ -24,9 +24,6 @@
#ifndef PAS16_H
#define PAS16_H
-#define PDEBUG_INIT 0x1
-#define PDEBUG_TRANSFER 0x2
-
#define PAS16_DEFAULT_BASE_1 0x388
#define PAS16_DEFAULT_BASE_2 0x384
#define PAS16_DEFAULT_BASE_3 0x38c
@@ -120,21 +117,8 @@
#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] )
-#if !(PDEBUG & PDEBUG_TRANSFER)
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
- , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) )
-
-#define NCR5380_write(reg, value) \
- (printk("scsi%d : write %02x to register %d at io_port %04x\n", \
- instance->hostno, (value), (reg), PAS16_io_port(reg)), \
- outb( (value),PAS16_io_port(reg) ) )
-
-#endif
-
#define NCR5380_intr pas16_intr
#define do_NCR5380_intr do_pas16_intr
Index: linux/drivers/scsi/t128.c
===================================================================
--- linux.orig/drivers/scsi/t128.c 2015-12-06 12:29:19.000000000 +1100
+++ linux/drivers/scsi/t128.c 2015-12-06 12:29:21.000000000 +1100
@@ -182,9 +182,8 @@ static int __init t128_detect(struct scs
base = 0;
} else
for (; !base && (current_base < NO_BASES); ++current_base) {
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n",
+ bases[current_base].address);
if (bases[current_base].noauto)
continue;
p = ioremap(bases[current_base].address, 0x2000);
@@ -195,17 +194,13 @@ static int __init t128_detect(struct scs
signatures[sig].string,
strlen(signatures[sig].string))) {
base = bases[current_base].address;
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "t128: detected board\n");
goto found;
}
iounmap(p);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : base = %08x\n", (unsigned int) base);
-#endif
+ dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base);
if (!base)
break;
@@ -242,9 +237,8 @@ found:
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
Index: linux/drivers/scsi/t128.h
===================================================================
--- linux.orig/drivers/scsi/t128.h 2015-12-06 12:29:18.000000000 +1100
+++ linux/drivers/scsi/t128.h 2015-12-06 12:29:21.000000000 +1100
@@ -23,10 +23,6 @@
#ifndef T128_H
#define T128_H
-#define TDEBUG 0
-#define TDEBUG_INIT 0x1
-#define TDEBUG_TRANSFER 0x2
-
/*
* The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG).
@@ -92,20 +88,8 @@
#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
-#if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
- , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
-
-#define NCR5380_write(reg, value) { \
- printk("scsi%d : write %02x to register %d at address %08x\n", \
- instance->hostno, (value), (reg), T128_address(reg)); \
- writeb((value), (T128_address(reg))); \
-}
-#endif
#define NCR5380_intr t128_intr
#define do_NCR5380_intr do_t128_intr
next prev parent reply other threads:[~2015-12-06 4:07 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-06 1:31 [PATCH v2 00/72] More fixes, cleanup and modernization for NCR5380 drivers Finn Thain
2015-12-06 1:31 ` [PATCH v2 01/72] atari_scsi: Fix SCSI host ID setting Finn Thain
2015-12-06 1:31 ` [PATCH v2 02/72] ncr5380: Remove redundant static variable initializers Finn Thain
2015-12-06 1:31 ` Finn Thain [this message]
2015-12-06 1:31 ` [PATCH v2 04/72] ncr5380: Remove more pointless macros Finn Thain
2015-12-06 1:31 ` [PATCH v2 05/72] ncr5380: Remove NCR5380_local_declare and NCR5380_setup macros Finn Thain
2015-12-06 1:31 ` [PATCH v2 06/72] ncr5380: Remove NCR5380_instance_name macro Finn Thain
2015-12-06 1:31 ` [PATCH v2 07/72] ncr5380: Split NCR5380_init() into two functions Finn Thain
2015-12-06 1:31 ` [PATCH v2 08/72] ncr5380: Move NCR53C400-specific code Finn Thain
2015-12-06 1:31 ` [PATCH v2 09/72] atari_NCR5380: Reset bus on driver initialization if required Finn Thain
2015-12-06 1:31 ` [PATCH v2 10/72] atari_NCR5380: Remove RESET_BOOT, CONFIG_ATARI_SCSI_TOSHIBA_DELAY and CONFIG_ATARI_SCSI_RESET_BOOT Finn Thain
2015-12-06 1:31 ` [PATCH v2 11/72] ncr5380: Simplify bus reset handlers Finn Thain
2015-12-06 1:31 ` [PATCH v2 12/72] ncr5380: Remove unused hostdata->aborted flag Finn Thain
2015-12-06 1:31 ` [PATCH v2 13/72] ncr5380: Remove redundant register writes Finn Thain
2015-12-06 1:31 ` [PATCH v2 14/72] ncr5380: Use return instead of goto in NCR5380_select() Finn Thain
2015-12-06 1:31 ` [PATCH v2 15/72] ncr5380: Always escalate bad target time-out " Finn Thain
2015-12-06 1:31 ` [PATCH v2 16/72] ncr5380: Proceed with next command after NCR5380_select() calls scsi_done Finn Thain
2015-12-06 1:31 ` [PATCH v2 17/72] ncr5380: Keep BSY asserted when entering SELECTION phase Finn Thain
2015-12-06 1:31 ` [PATCH v2 18/72] ncr5380: Eliminate USLEEP_WAITLONG delay Finn Thain
2015-12-06 1:31 ` [PATCH v2 19/72] ncr5380: Cleanup bogus {request,release}_region() calls Finn Thain
2015-12-06 1:31 ` [PATCH v2 20/72] ncr5380: Introduce unbound workqueue Finn Thain
2015-12-06 1:31 ` [PATCH v2 21/72] ncr5380: Sleep when polling, if possible Finn Thain
2015-12-06 10:18 ` Geert Uytterhoeven
2015-12-06 22:07 ` Finn Thain
2015-12-06 1:31 ` [PATCH v2 22/72] ncr5380: Eliminate selecting state Finn Thain
2015-12-06 1:31 ` [PATCH v2 23/72] ncr5380: Always retry arbitration and selection Finn Thain
2015-12-06 1:31 ` [PATCH v2 24/72] ncr5380: Implement NCR5380_dma_xfer_len and remove LIMIT_TRANSFERSIZE macro Finn Thain
2015-12-06 1:31 ` [PATCH v2 25/72] ncr5380: Rework disconnect versus poll logic Finn Thain
2015-12-06 1:31 ` [PATCH v2 26/72] ncr5380: Fix NCR5380_transfer_pio() result Finn Thain
2015-12-06 1:31 ` [PATCH v2 27/72] ncr5380: Add missing lock in eh_abort_handler Finn Thain
2015-12-06 1:31 ` [PATCH v2 28/72] ncr5380: Drop DEF_SCSI_QCMD macro Finn Thain
2015-12-06 1:31 ` [PATCH v2 29/72] ncr5380: Remove references to linked commands Finn Thain
2015-12-06 1:31 ` [PATCH v2 30/72] ncr5380: Add missing break after case MESSAGE_REJECT Finn Thain
2015-12-06 1:31 ` [PATCH v2 31/72] ncr5380: Fix !REQ timeout in do_abort() Finn Thain
2015-12-06 1:31 ` [PATCH v2 32/72] ncr5380: Fix bus phase " Finn Thain
2015-12-06 1:31 ` [PATCH v2 33/72] atari_NCR5380: Set do_abort() timeouts Finn Thain
2015-12-06 1:32 ` [PATCH v2 34/72] atari_NCR5380: Use arbitration timeout Finn Thain
2015-12-06 1:32 ` [PATCH v2 35/72] ncr5380: Dont wait for BUS FREE after disconnect Finn Thain
2015-12-06 1:32 ` [PATCH v2 36/72] ncr5380: Use work_struct instead of delayed_work Finn Thain
2015-12-06 1:32 ` [PATCH v2 37/72] ncr5380: Standardize work queueing algorithm Finn Thain
2015-12-06 1:32 ` [PATCH v2 38/72] ncr5380: Remove UNSAFE macro Finn Thain
2015-12-06 1:32 ` [PATCH v2 39/72] ncr5380: Standardize interrupt handling Finn Thain
2015-12-06 1:32 ` [PATCH v2 40/72] ncr5380: Introduce NCR5380_poll_politely2 Finn Thain
2015-12-06 1:32 ` [PATCH v2 41/72] ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP Finn Thain
2015-12-06 1:32 ` [PATCH v2 42/72] ncr5380: Replace READ_OVERRUNS macro with FLAG_NO_DMA_FIXUPS Finn Thain
2015-12-06 1:32 ` [PATCH v2 43/72] ncr5380: Standardize reselection handling Finn Thain
2015-12-06 1:32 ` [PATCH v2 44/72] ncr5380: Fix off-by-one bug in extended_msg[] bounds check Finn Thain
2015-12-06 1:32 ` [PATCH v2 45/72] ncr5380: Cleanup #include directives Finn Thain
2015-12-06 1:32 ` [PATCH v2 46/72] ncr5380: Fix NDEBUG_NO_DATAOUT flag Finn Thain
2015-12-06 1:32 ` [PATCH v2 47/72] ncr5380: Fix and cleanup scsi_host_template initializers Finn Thain
2015-12-06 1:32 ` [PATCH v2 48/72] atari_NCR5380: Fix queue_size limit Finn Thain
2015-12-06 1:32 ` [PATCH v2 49/72] ncr5380: Remove redundant ICR_ARBITRATION_LOST test and eliminate FLAG_DTC3181E Finn Thain
2015-12-06 1:32 ` [PATCH v2 50/72] ncr5380: Change instance->host_lock to hostdata->lock Finn Thain
2015-12-06 1:32 ` [PATCH v2 51/72] ncr5380: Remove command list debug code Finn Thain
2015-12-06 1:32 ` [PATCH v2 52/72] ncr5380: Remove H_NO macro and introduce dsprintk Finn Thain
2015-12-06 1:32 ` [PATCH v2 53/72] ncr5380: Use shost_priv helper Finn Thain
2015-12-06 1:32 ` [PATCH v2 54/72] ncr5380: Use dsprintk() for queue debugging Finn Thain
2015-12-06 1:32 ` [PATCH v2 55/72] ncr5380: Remove LIST and REMOVE macros Finn Thain
2015-12-06 1:32 ` [PATCH v2 56/72] ncr5380: Remove redundant volatile qualifiers Finn Thain
2015-12-06 1:32 ` [PATCH v2 57/72] ncr5380: Use standard list data structure Finn Thain
2015-12-06 1:32 ` [PATCH v2 58/72] ncr5380: Refactor command completion Finn Thain
2015-12-06 1:32 ` [PATCH v2 59/72] ncr5380: Fix autosense bugs Finn Thain
2015-12-06 1:32 ` [PATCH v2 60/72] ncr5380: Implement new eh_abort_handler Finn Thain
2015-12-06 1:32 ` [PATCH v2 61/72] ncr5380: Fix EH during arbitration and selection Finn Thain
2015-12-06 1:32 ` [PATCH v2 62/72] ncr5380: Implement new eh_bus_reset_handler Finn Thain
2015-12-06 1:32 ` [PATCH v2 63/72] atari_NCR5380: Remove HOSTNO macro from printk() and seq_printf() calls Finn Thain
2015-12-06 1:32 ` [PATCH v2 64/72] atari_NCR5380: Eliminate HOSTNO macro Finn Thain
2015-12-06 1:32 ` [PATCH v2 65/72] atari_scsi, sun3_scsi: Remove global Scsi_Host pointer Finn Thain
2015-12-06 1:32 ` [PATCH v2 66/72] ncr5380: Fix soft lockups Finn Thain
2015-12-06 1:32 ` [PATCH v2 67/72] ncr5380: Cleanup comments Finn Thain
2015-12-06 1:32 ` [PATCH v2 68/72] ncr5380: Fix whitespace issues using regexp Finn Thain
2015-12-06 1:32 ` [PATCH v2 69/72] ncr5380: Merge changes from atari_NCR5380.c Finn Thain
2015-12-06 1:32 ` [PATCH v2 70/72] atari_NCR5380: Merge changes from NCR5380.c Finn Thain
2015-12-06 1:32 ` [PATCH v2 71/72] ncr5380: Cleanup whitespace and parentheses Finn Thain
2015-12-06 1:32 ` [PATCH v2 72/72] ncr5380: Fix pseudo DMA transfers on 53C400 Finn Thain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151206013127.745551474@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=JBottomley@odin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=schmitzmic@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox